linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiang Liu <jiang.liu@linux.intel.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Randy Dunlap <rdunlap@infradead.org>,
	Yinghai Lu <yinghai@kernel.org>, Borislav Petkov <bp@alien8.de>,
	Grant Likely <grant.likely@linaro.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>,
	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Tony Luck <tony.luck@intel.com>, Joerg Roedel <joro@8bytes.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	x86@kernel.org, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: [RFC Part1 v1 11/18] x86, irq: Move HT IRQ related code from io_apic.c into htirq.c
Date: Thu, 11 Sep 2014 16:24:58 +0800	[thread overview]
Message-ID: <1410423905-26239-12-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1410423905-26239-1-git-send-email-jiang.liu@linux.intel.com>

Create arch/x86/kernel/apic/htirq.c to host Hypertransport IRQ related
code, preparing for enabling hierarchy irqdomain.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
 arch/x86/kernel/apic/Makefile  |    1 +
 arch/x86/kernel/apic/htirq.c   |  106 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/apic/io_apic.c |   91 ----------------------------------
 3 files changed, 107 insertions(+), 91 deletions(-)
 create mode 100644 arch/x86/kernel/apic/htirq.c

diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index aac300750f0e..8bb12ddc5db8 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -7,6 +7,7 @@ obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_PCI_MSI)		+= msi.o
+obj-$(CONFIG_HT_IRQ)		+= htirq.o
 obj-$(CONFIG_SMP)		+= ipi.o
 
 ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/apic/htirq.c b/arch/x86/kernel/apic/htirq.c
new file mode 100644
index 000000000000..1cd879fe39d7
--- /dev/null
+++ b/arch/x86/kernel/apic/htirq.c
@@ -0,0 +1,106 @@
+/*
+ * Support Hypertransport IRQ
+ *
+ * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
+ *	Moved from arch/x86/kernel/apic/io_apic.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/htirq.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/hypertransport.h>
+
+/*
+ * Hypertransport interrupt support
+ */
+static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
+{
+	struct ht_irq_msg msg;
+
+	fetch_ht_irq_msg(irq, &msg);
+
+	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
+	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+
+	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
+	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
+
+	write_ht_irq_msg(irq, &msg);
+}
+
+static int
+ht_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
+{
+	struct irq_cfg *cfg = data->chip_data;
+	unsigned int dest;
+	int ret;
+
+	ret = apic_set_affinity(data, mask, &dest);
+	if (ret)
+		return ret;
+
+	target_ht_irq(data->irq, dest, cfg->vector);
+	return IRQ_SET_MASK_OK_NOCOPY;
+}
+
+static struct irq_chip ht_irq_chip = {
+	.name			= "PCI-HT",
+	.irq_mask		= mask_ht_irq,
+	.irq_unmask		= unmask_ht_irq,
+	.irq_ack		= apic_ack_edge,
+	.irq_set_affinity	= ht_set_affinity,
+	.irq_retrigger		= apic_retrigger_irq,
+};
+
+int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
+{
+	struct irq_cfg *cfg;
+	struct ht_irq_msg msg;
+	unsigned dest;
+	int err;
+
+	if (disable_apic)
+		return -ENXIO;
+
+	cfg = irq_cfg(irq);
+	err = assign_irq_vector(irq, cfg, apic->target_cpus());
+	if (err)
+		return err;
+
+	err = apic->cpu_mask_to_apicid_and(cfg->domain,
+					   apic->target_cpus(), &dest);
+	if (err)
+		return err;
+
+	msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+
+	msg.address_lo =
+		HT_IRQ_LOW_BASE |
+		HT_IRQ_LOW_DEST_ID(dest) |
+		HT_IRQ_LOW_VECTOR(cfg->vector) |
+		((apic->irq_dest_mode == 0) ?
+			HT_IRQ_LOW_DM_PHYSICAL :
+			HT_IRQ_LOW_DM_LOGICAL) |
+		HT_IRQ_LOW_RQEOI_EDGE |
+		((apic->irq_delivery_mode != dest_LowestPrio) ?
+			HT_IRQ_LOW_MT_FIXED :
+			HT_IRQ_LOW_MT_ARBITRATED) |
+		HT_IRQ_LOW_IRQ_MASKED;
+
+	write_ht_irq_msg(irq, &msg);
+
+	irq_set_chip_and_handler_name(irq, &ht_irq_chip,
+				      handle_edge_irq, "edge");
+
+	dev_dbg(&dev->dev, "irq %d for HT\n", irq);
+
+	return 0;
+}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index b9fdef0299a4..bca60cd61950 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -32,7 +32,6 @@
 #include <linux/module.h>
 #include <linux/syscore_ops.h>
 #include <linux/irqdomain.h>
-#include <linux/htirq.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
 #include <linux/jiffies.h>	/* time_after() */
@@ -49,7 +48,6 @@
 #include <asm/dma.h>
 #include <asm/timer.h>
 #include <asm/i8259.h>
-#include <asm/hypertransport.h>
 #include <asm/setup.h>
 #include <asm/irq_remapping.h>
 #include <asm/hw_irq.h>
@@ -2449,95 +2447,6 @@ static int __init ioapic_init_ops(void)
 
 device_initcall(ioapic_init_ops);
 
-/*
- * Hypertransport interrupt support
- */
-#ifdef CONFIG_HT_IRQ
-
-static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	struct ht_irq_msg msg;
-	fetch_ht_irq_msg(irq, &msg);
-
-	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
-	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
-
-	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
-	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
-
-	write_ht_irq_msg(irq, &msg);
-}
-
-static int
-ht_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
-{
-	struct irq_cfg *cfg = data->chip_data;
-	unsigned int dest;
-	int ret;
-
-	ret = apic_set_affinity(data, mask, &dest);
-	if (ret)
-		return ret;
-
-	target_ht_irq(data->irq, dest, cfg->vector);
-	return IRQ_SET_MASK_OK_NOCOPY;
-}
-
-static struct irq_chip ht_irq_chip = {
-	.name			= "PCI-HT",
-	.irq_mask		= mask_ht_irq,
-	.irq_unmask		= unmask_ht_irq,
-	.irq_ack		= apic_ack_edge,
-	.irq_set_affinity	= ht_set_affinity,
-	.irq_retrigger		= apic_retrigger_irq,
-};
-
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
-{
-	struct irq_cfg *cfg;
-	struct ht_irq_msg msg;
-	unsigned dest;
-	int err;
-
-	if (disable_apic)
-		return -ENXIO;
-
-	cfg = irq_cfg(irq);
-	err = assign_irq_vector(irq, cfg, apic->target_cpus());
-	if (err)
-		return err;
-
-	err = apic->cpu_mask_to_apicid_and(cfg->domain,
-					   apic->target_cpus(), &dest);
-	if (err)
-		return err;
-
-	msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
-
-	msg.address_lo =
-		HT_IRQ_LOW_BASE |
-		HT_IRQ_LOW_DEST_ID(dest) |
-		HT_IRQ_LOW_VECTOR(cfg->vector) |
-		((apic->irq_dest_mode == 0) ?
-			HT_IRQ_LOW_DM_PHYSICAL :
-			HT_IRQ_LOW_DM_LOGICAL) |
-		HT_IRQ_LOW_RQEOI_EDGE |
-		((apic->irq_delivery_mode != dest_LowestPrio) ?
-			HT_IRQ_LOW_MT_FIXED :
-			HT_IRQ_LOW_MT_ARBITRATED) |
-		HT_IRQ_LOW_IRQ_MASKED;
-
-	write_ht_irq_msg(irq, &msg);
-
-	irq_set_chip_and_handler_name(irq, &ht_irq_chip,
-				      handle_edge_irq, "edge");
-
-	dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq);
-
-	return 0;
-}
-#endif /* CONFIG_HT_IRQ */
-
 static int
 io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr)
 {
-- 
1.7.10.4


  parent reply	other threads:[~2014-09-11  8:24 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-11  8:24 [RFC Part1 v1 00/18] Prepare for enabling hierarchy irqdomain on x86 Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 01/18] x86, irq, ACPI: Fix building warning of unused code Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 02/18] x86, irq: Kill fourth parameter of IO_APIC_get_PCI_irq_vector() Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 03/18] x86, irq: Convert irq_2_pin list to generic list Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 04/18] x86, irq: Refine hw_irq.h to prepare for irqdomain support Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 05/18] x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx() Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 06/18] x86, irq: Protect __clear_irq_vector() with vector_lock Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 07/18] x86, irq: Introduce helpers to access struct irq_cfg Jiang Liu
2014-09-11  9:27   ` Thomas Gleixner
2014-09-11 14:47     ` Thomas Gleixner
2014-09-11  8:24 ` [RFC Part1 v1 08/18] x86, irq: Move local APIC related code from io_apic.c into vector.c Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 09/18] x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities Jiang Liu
2014-09-11  8:24 ` [RFC Part1 v1 10/18] x86, irq: Move PCI MSI related code from io_apic.c into msi.c Jiang Liu
2014-09-11  8:24 ` Jiang Liu [this message]
2014-09-11  8:24 ` [RFC Part1 v1 12/18] x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h Jiang Liu
2014-09-11  8:25 ` [RFC Part1 v1 13/18] x86, irq: Move IRQ initialization routines from io_apic.c into vector.c Jiang Liu
2014-09-11  8:25 ` [RFC Part1 v1 14/18] x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC Jiang Liu
2014-09-11  8:25 ` [RFC Part1 v1 15/18] x86, irq: Use helpers to access irq_cfg data structure associated with IRQ Jiang Liu
2014-09-11  8:25 ` [RFC Part1 v1 16/18] x86: irq_remapping: " Jiang Liu
2014-09-11  8:25 ` [RFC Part1 v1 17/18] iommu/vt-d: " Jiang Liu
2014-09-11  8:25 ` [RFC Part1 v1 18/18] iommu/amd: " Jiang Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1410423905-26239-12-git-send-email-jiang.liu@linux.intel.com \
    --to=jiang.liu@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=bp@alien8.de \
    --cc=grant.likely@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hpa@zytor.com \
    --cc=joro@8bytes.org \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=rdunlap@infradead.org \
    --cc=rjw@rjwysocki.net \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).