[RFC v1 10/28] x86, irq: Kill x86_io_apic_ops.eoi_ioapic_pin and related interfaces

[Jiang Liu <jiang.liu@linux.intel.com>]

Now there is no user of x86_io_apic_ops.eoi_ioapic_pin anymore, so kill
it.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
 arch/x86/include/asm/io_apic.h  |    7 -------
 arch/x86/include/asm/x86_init.h |    1 -
 arch/x86/kernel/apic/io_apic.c  |   38 +-------------------------------------
 arch/x86/kernel/x86_init.c      |    1 -
 drivers/iommu/irq_remapping.c   |   19 -------------------
 5 files changed, 1 insertion(+), 65 deletions(-)

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index e82f78f0c04d..f58cf21ced59 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,10 +150,6 @@ struct irq_cfg;
 extern void ioapic_insert_resources(void);
 extern int arch_early_ioapic_init(void);
 
-extern void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg);
-
-extern void native_eoi_ioapic_pin(int apic, int pin, int vector);
-
 extern int save_ioapic_entries(void);
 extern void mask_ioapic_entries(void);
 extern int restore_ioapic_entries(void);
@@ -238,8 +234,6 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
 	x86_io_apic_ops.modify(apic, reg, value);
 }
 
-extern void io_apic_eoi(unsigned int apic, unsigned int vector);
-
 extern void setup_IO_APIC(void);
 extern void enable_IO_APIC(void);
 extern void disable_IO_APIC(void);
@@ -284,7 +278,6 @@ static inline void disable_ioapic_support(void) { }
 #define native_io_apic_write		NULL
 #define native_io_apic_modify		NULL
 #define native_disable_io_apic		NULL
-#define native_eoi_ioapic_pin		NULL
 #endif
 
 #endif /* _ASM_X86_IO_APIC_H */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 2637e8fb978d..fa6b1b5128ee 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -194,7 +194,6 @@ struct x86_io_apic_ops {
 	void		(*write)  (unsigned int apic, unsigned int reg, unsigned int value);
 	void		(*modify) (unsigned int apic, unsigned int reg, unsigned int value);
 	void		(*disable)(void);
-	void		(*eoi_ioapic_pin)(int apic, int pin, int vector);
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 3f4c2cc2772b..7ab9cea9ae1b 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -290,7 +290,7 @@ static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 		+ (mpc_ioapic_addr(idx) & ~PAGE_MASK);
 }
 
-void io_apic_eoi(unsigned int apic, unsigned int vector)
+static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
 {
 	struct io_apic __iomem *io_apic = io_apic_base(apic);
 	writel(vector, &io_apic->eoi);
@@ -546,30 +546,6 @@ static void unmask_ioapic_irq(struct irq_data *data)
  * Otherwise, we simulate the EOI message manually by changing the trigger
  * mode to edge and then back to level, with RTE being masked during this.
  */
-void native_eoi_ioapic_pin(int apic, int pin, int vector)
-{
-	if (mpc_ioapic_ver(apic) >= 0x20) {
-		io_apic_eoi(apic, vector);
-	} else {
-		struct IO_APIC_route_entry entry, entry1;
-
-		entry = entry1 = __ioapic_read_entry(apic, pin);
-
-		/*
-		 * Mask the entry and change the trigger mode to edge.
-		 */
-		entry1.mask = 1;
-		entry1.trigger = IOAPIC_EDGE;
-
-		__ioapic_write_entry(apic, pin, entry1);
-
-		/*
-		 * Restore the previous level triggered entry.
-		 */
-		__ioapic_write_entry(apic, pin, entry);
-	}
-}
-
 static void eoi_io_apic(bool remapped, int apic, int pin, int vector)
 {
 	if (unlikely(remapped)) {
@@ -602,18 +578,6 @@ static void eoi_io_apic(bool remapped, int apic, int pin, int vector)
 	}
 }
 
-void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
-	struct irq_pin_list *entry;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	for_each_irq_pin(entry, cfg->irq_2_pin)
-		x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin,
-					       cfg->vector);
-	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 {
 	struct IO_APIC_route_entry entry;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 377b22008280..ac2b604c00ec 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -154,5 +154,4 @@ struct x86_io_apic_ops x86_io_apic_ops = {
 	.write			= native_io_apic_write,
 	.modify			= native_io_apic_modify,
 	.disable		= native_disable_io_apic,
-	.eoi_ioapic_pin		= native_eoi_ioapic_pin,
 };
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 116796c194d2..cebb198ecf16 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -43,21 +43,9 @@ static void irq_remapping_disable_io_apic(void)
 		disconnect_bsp_APIC(0);
 }
 
-static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
-{
-	/*
-	 * Intr-remapping uses pin number as the virtual vector
-	 * in the RTE. Actual vector is programmed in
-	 * intr-remapping table entry. Hence for the io-apic
-	 * EOI we use the pin number.
-	 */
-	io_apic_eoi(apic, pin);
-}
-
 static void __init irq_remapping_modify_x86_ops(void)
 {
 	x86_io_apic_ops.disable		= irq_remapping_disable_io_apic;
-	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
 }
 
 static __init int setup_nointremap(char *str)
@@ -193,12 +181,6 @@ void ir_ack_apic_edge(struct irq_data *data)
 	ack_APIC_irq();
 }
 
-static void ir_ack_apic_level(struct irq_data *data)
-{
-	ack_APIC_irq();
-	eoi_ioapic_irq(data->irq, irqd_cfg(data));
-}
-
 void irq_remapping_print_chip(struct irq_data *data, struct seq_file *p)
 {
 	/*
@@ -221,7 +203,6 @@ void irq_remap_modify_chip_defaults(struct irq_chip *chip)
 {
 	chip->irq_print_chip = ir_print_prefix;
 	chip->irq_ack = ir_ack_apic_edge;
-	chip->irq_eoi = ir_ack_apic_level;
 }
 
 bool setup_remapped_irq(int irq, struct irq_cfg *cfg, struct irq_chip *chip)
-- 
1.7.10.4