From: Richard Zhu <richard.zhu@freescale.com>
To: <linux-pci@vger.kernel.org>
Cc: <shawn.guo@freescale.com>, <festevam@gmail.com>,
<l.stach@pengutronix.de>, <tharvey@gateworks.com>,
Richard Zhu <r65037@freescale.com>,
Richard Zhu <richard.zhu@freescale.com>
Subject: [PATCH v6 01/13] PCI: designware: Refine setup_rc and add msi data restore
Date: Thu, 16 Oct 2014 15:52:31 +0800 [thread overview]
Message-ID: <1413445963-24706-2-git-send-email-richard.zhu@freescale.com> (raw)
In-Reply-To: <1413445963-24706-1-git-send-email-richard.zhu@freescale.com>
From: Richard Zhu <r65037@freescale.com>
- move "program correct class for RC" from dw_pcie_host_init()
to dw_pcie_setup_rc(). since this is RC setup, it's
better to contained in dw_pcie_setup_rc function.
Then, RC can be re-setup really by dw_pcie_setup_rc().
- add one store/re-store msi cfg functions. Because that
pcie controller maybe powered off during system suspend,
and the msi data configuration would be lost.
these functions can be used to store/restore the msi data
and msi_enable during the suspend/resume callback.
Signed-off-by: Richard Zhu <richard.zhu@freescale.com>
---
drivers/pci/host/pcie-designware.c | 21 ++++++++++++++++++---
drivers/pci/host/pcie-designware.h | 3 +++
2 files changed, 21 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 538bbf3..b1f82ff 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -194,6 +194,19 @@ void dw_pcie_msi_init(struct pcie_port *pp)
dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0);
}
+void dw_pcie_msi_cfg_store(struct pcie_port *pp)
+{
+ dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE, 4, &pp->msi_enable);
+}
+
+void dw_pcie_msi_cfg_restore(struct pcie_port *pp)
+{
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
+ virt_to_phys((void *)pp->msi_data));
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0);
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE, 4, pp->msi_enable);
+}
+
static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
{
int flag = 1;
@@ -570,9 +583,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
- /* program correct class for RC */
- dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
-
dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
val |= PORT_LOGIC_SPEED_CHANGE;
dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
@@ -917,6 +927,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
val = memlimit | membase;
dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE);
+ /* program correct class for RC */
+ dw_pcie_readl_rc(pp, PCI_CLASS_REVISION, &val);
+ val |= PCI_CLASS_BRIDGE_PCI << 16;
+ dw_pcie_writel_rc(pp, val, PCI_CLASS_REVISION);
+
/* setup command register */
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
val &= 0xffff0000;
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index a476e60..b0bfed0 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -56,6 +56,7 @@ struct pcie_port {
int msi_irq;
struct irq_domain *irq_domain;
unsigned long msi_data;
+ unsigned int msi_enable;
DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
};
@@ -83,6 +84,8 @@ int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);
int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val);
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
void dw_pcie_msi_init(struct pcie_port *pp);
+void dw_pcie_msi_cfg_store(struct pcie_port *pp);
+void dw_pcie_msi_cfg_restore(struct pcie_port *pp);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
--
1.9.1
next prev parent reply other threads:[~2014-10-16 8:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-16 7:52 [PATCH v6]PCI: imx6: enable pcie on imx6sx sdb and imx6qdl sabreauto Richard Zhu
2014-10-16 7:52 ` Richard Zhu [this message]
2014-10-16 10:36 ` [PATCH v6 01/13] PCI: designware: Refine setup_rc and add msi data restore Lucas Stach
2014-10-20 5:23 ` Hong-Xing.Zhu
2014-10-16 7:52 ` [PATCH v6 02/13] PCI: designware: Set func type of host init to int Richard Zhu
2014-10-16 10:39 ` Lucas Stach
2014-10-20 5:21 ` Hong-Xing.Zhu
2014-10-16 7:52 ` [PATCH v6 03/13] PCI: dra7xx: Change the func type of host init Richard Zhu
2014-10-16 7:52 ` [PATCH v6 04/13] PCI: exynos: " Richard Zhu
2014-10-16 7:52 ` [PATCH v6 05/13] PCI: spear: " Richard Zhu
2014-10-16 7:52 ` [PATCH v6 06/13] PCI: designware: Fix one potential assignment error of cfg start Richard Zhu
2014-10-16 7:52 ` [PATCH v6 07/13] ARM: imx6sx: Add imx6sx pcie related gpr bits definitions Richard Zhu
2014-10-16 7:52 ` [PATCH v6 08/13] PCI: imx6: Wait the clocks to stabilize after ref_en Richard Zhu
2014-10-16 7:52 ` [PATCH v6 09/13] PCI: imx6: Add imx6sx pcie support Richard Zhu
2014-10-16 10:54 ` Lucas Stach
2014-10-17 2:11 ` Hong-Xing.Zhu
2014-10-16 7:52 ` [PATCH v6 10/13] ARM: imx6qdl: Enable pcie on imx6qdl sabreauto Richard Zhu
2014-10-16 7:52 ` [PATCH v6 11/13] ARM: imx6: Update dts and binding for imx6sx pcie Richard Zhu
2014-10-16 7:52 ` [PATCH v6 12/13] ARM: imx6sx: Add syscon into gpc dts Richard Zhu
2014-10-16 7:52 ` [PATCH v6 13/13] ARM: imx6sx: Enable pcie on imx6sx sdb board Richard Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413445963-24706-2-git-send-email-richard.zhu@freescale.com \
--to=richard.zhu@freescale.com \
--cc=festevam@gmail.com \
--cc=l.stach@pengutronix.de \
--cc=linux-pci@vger.kernel.org \
--cc=r65037@freescale.com \
--cc=shawn.guo@freescale.com \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).