From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga03.intel.com ([134.134.136.65]:28709 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751867AbaKEBsP (ORCPT ); Tue, 4 Nov 2014 20:48:15 -0500 From: Chuansheng Liu To: bhelgaas@google.com, aaron.lu@intel.com, tj@kernel.org, rjw@rjwysocki.net, mister.freeman@laposte.net Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, chuansheng.liu@intel.com Subject: [PATCH] PCI: Do not enable async suspend for JMicron chips Date: Wed, 5 Nov 2014 09:31:03 +0800 Message-Id: <1415151063-2530-1-git-send-email-chuansheng.liu@intel.com> Sender: linux-pci-owner@vger.kernel.org List-ID: The JMicron chip 361/363/368 contains one SATA controller and one PATA controller, they are brother-relation ship in PCI tree, but for powering on these both controller, we must follow the sequence one by one, otherwise one of them can not be powered on successfully. So here we disable the async suspend method for Jmicron chip. Bug link: https://bugzilla.kernel.org/show_bug.cgi?id=81551 https://bugzilla.kernel.org/show_bug.cgi?id=84861 And we can revert the below commit after this patch is applied: e6b7e41(ata: Disabling the async PM for JMicron chip 363/361) Cc: stable@vger.kernel.org # 3.15+ Acked-by: Aaron Lu Signed-off-by: Chuansheng Liu --- drivers/pci/pci.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 625a4ac..53128f0 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2046,7 +2046,17 @@ void pci_pm_init(struct pci_dev *dev) pm_runtime_forbid(&dev->dev); pm_runtime_set_active(&dev->dev); pm_runtime_enable(&dev->dev); - device_enable_async_suspend(&dev->dev); + + /* + * The JMicron chip 361/363/368 contains one SATA controller and + * one PATA controller, they are brother-relation ship in PCI tree, + * but for powering on these both controller, we must follow the + * sequence one by one, otherwise one of them can not be powered on + * successfully, so here we disable the async suspend method for + * Jmicron chip. + */ + if (dev->vendor != PCI_VENDOR_ID_JMICRON) + device_enable_async_suspend(&dev->dev); dev->wakeup_prepared = false; dev->pm_cap = 0; -- 1.7.9.5