linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	"H. Peter Anvin" <hpa@zytor.com>, Ingo Molnar <mingo@redhat.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v2] PCI: Don't reject 64bit mmio on 32bit/PAE mode
Date: Tue, 18 Nov 2014 10:19:04 -0800	[thread overview]
Message-ID: <1416334744-16817-1-git-send-email-yinghai@kernel.org> (raw)

Aaron reported 32bit/PAE mode, has problem with 64bit resource.

[    6.610012] pci 0000:03:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref]
[    6.622195] pci 0000:03:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref]
[    6.656112] pci 0000:03:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref]
[    6.668293] pci 0000:03:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref]
[    6.702055] pci 0000:00:02.2: PCI bridge to [bus 03-04]
[    6.706434] pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
[    6.711783] pci 0000:00:02.2:   bridge window [mem 0x91900000-0x91cfffff]
[    6.717906] pci 0000:00:02.2: can't handle 64-bit address space for bridge

So the kernel reject 64bit mmio on pci pref bridge that is assigned by
firmware.

When 32bit PAE is enabled, we could support 64bit mmio.
but BITS_PER_LONG==64 checking could reject firmware assigned mmio that
is above 4G. On x86 32bit always has BITS_PER_LONG equal to 32.

We could use CONFIG_ARCH_DMA_ADDR_T_64BIT or dma_addr_t size checking instead.
Use dma_addr_t size checking to avoid using MARCO.

Also need to change to use dma_addr_t instead of unsigned long
for base/limit to avoid overflow.

-v2: add u64 cast to avoid compiler warning.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=88131
Reported-by: Aaron Ma <mapengyu@gmail.com>
Tested-by: Aaron Ma <mapengyu@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 drivers/pci/probe.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c
+++ linux-2.6/drivers/pci/probe.c
@@ -406,15 +406,15 @@ static void pci_read_bridge_mmio_pref(st
 {
 	struct pci_dev *dev = child->self;
 	u16 mem_base_lo, mem_limit_lo;
-	unsigned long base, limit;
+	dma_addr_t base, limit;
 	struct pci_bus_region region;
 	struct resource *res;
 
 	res = child->resource[2];
 	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
 	pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
-	base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
-	limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
+	base = ((dma_addr_t) mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
+	limit = ((dma_addr_t) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
 
 	if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
 		u32 mem_base_hi, mem_limit_hi;
@@ -428,15 +428,15 @@ static void pci_read_bridge_mmio_pref(st
 		 * this, just assume they are not being used.
 		 */
 		if (mem_base_hi <= mem_limit_hi) {
-#if BITS_PER_LONG == 64
-			base |= ((unsigned long) mem_base_hi) << 32;
-			limit |= ((unsigned long) mem_limit_hi) << 32;
-#else
-			if (mem_base_hi || mem_limit_hi) {
-				dev_err(&dev->dev, "can't handle 64-bit address space for bridge\n");
-				return;
+			if (sizeof(dma_addr_t) < 8) {
+				if (mem_base_hi || mem_limit_hi) {
+					dev_err(&dev->dev, "can't handle 64-bit address space for bridge\n");
+					return;
+				}
+			} else  {
+				base |= (dma_addr_t)(((u64)mem_base_hi)<<32);
+				limit |= (dma_addr_t)(((u64)mem_limit_hi)<<32);
 			}
-#endif
 		}
 	}
 	if (base <= limit) {

                 reply	other threads:[~2014-11-18 18:19 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1416334744-16817-1-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=bhelgaas@google.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).