[Patch Part3 v4 02/38] x86, intel-mid, trivial: Refine code syntax for sfi_parse_mtmr()

[Jiang Liu <jiang.liu@linux.intel.com>]

Correctly indent code in function sfi_parse_mtmr().

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 arch/x86/platform/intel-mid/sfi.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index aa59f88868f8..9a16749935d4 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -95,16 +95,16 @@ int __init sfi_parse_mtmr(struct sfi_table_header *table)
 		pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n",
 			totallen, (u32)pentry->phys_addr,
 			pentry->freq_hz, pentry->irq);
-			mp_irq.type = MP_INTSRC;
-			mp_irq.irqtype = mp_INT;
-/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
-			mp_irq.irqflag = 5;
-			mp_irq.srcbus = MP_BUS_ISA;
-			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
-			mp_irq.dstapic = MP_APIC_ALL;
-			mp_irq.dstirq = pentry->irq;
-			mp_save_irq(&mp_irq);
-			mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC);
+		mp_irq.type = MP_INTSRC;
+		mp_irq.irqtype = mp_INT;
+		/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+		mp_irq.irqflag = 5;
+		mp_irq.srcbus = MP_BUS_ISA;
+		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+		mp_irq.dstapic = MP_APIC_ALL;
+		mp_irq.dstirq = pentry->irq;
+		mp_save_irq(&mp_irq);
+		mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC);
 	}
 
 	return 0;
-- 
1.7.10.4