[Patch Part3 v4 36/38] ACPI, irq, x86: Kill private function mp_register_gsi()/ mp_unregister_gsi()

[Jiang Liu <jiang.liu@linux.intel.com>]

Function mp_register_gsi() is only called once, so fold it into caller
acpi_register_gsi_ioapic(). Do the same for mp_unregister_gsi().

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/kernel/acpi/boot.c |   57 ++++++++++++++-----------------------------
 1 file changed, 18 insertions(+), 39 deletions(-)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 509a48f49fc7..e54a8d72ae6e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -400,42 +400,6 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
 	return 0;
 }
 
-static int mp_register_gsi(struct device *dev, u32 gsi, int trigger,
-			   int polarity)
-{
-	int irq, node;
-	struct irq_alloc_info info;
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return gsi;
-
-	trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
-	polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
-	node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
-	ioapic_set_alloc_attr(&info, node, trigger, polarity);
-	irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
-	if (irq < 0)
-		return irq;
-
-	/* Don't set up the ACPI SCI because it's already set up */
-	if (enable_update_mptable && acpi_gbl_FADT.sci_interrupt != gsi)
-		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
-
-	return irq;
-}
-
-static void mp_unregister_gsi(u32 gsi)
-{
-	int irq;
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return;
-
-	irq = mp_map_gsi_to_irq(gsi, 0, NULL);
-	if (irq > 0)
-		mp_unmap_irq(irq);
-}
-
 static struct irq_domain_ops acpi_irqdomain_ops = {
 	.alloc = mp_irqdomain_alloc,
 	.free = mp_irqdomain_free,
@@ -657,10 +621,21 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
 				    int trigger, int polarity)
 {
 	int irq = gsi;
-
 #ifdef CONFIG_X86_IO_APIC
+	int node;
+	struct irq_alloc_info info;
+
+	node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
+	trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
+	polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
+	ioapic_set_alloc_attr(&info, node, trigger, polarity);
+
 	mutex_lock(&acpi_ioapic_lock);
-	irq = mp_register_gsi(dev, gsi, trigger, polarity);
+	irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
+	/* Don't set up the ACPI SCI because it's already set up */
+	if (irq >= 0 && enable_update_mptable &&
+	    acpi_gbl_FADT.sci_interrupt != gsi)
+		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
 	mutex_unlock(&acpi_ioapic_lock);
 #endif
 
@@ -670,8 +645,12 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
 static void acpi_unregister_gsi_ioapic(u32 gsi)
 {
 #ifdef CONFIG_X86_IO_APIC
+	int irq;
+
 	mutex_lock(&acpi_ioapic_lock);
-	mp_unregister_gsi(gsi);
+	irq = mp_map_gsi_to_irq(gsi, 0, NULL);
+	if (irq > 0)
+		mp_unmap_irq(irq);
 	mutex_unlock(&acpi_ioapic_lock);
 #endif
 }
-- 
1.7.10.4