From: Rob Herring <robh@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh@kernel.org>, Krzysztof Halasa <khalasa@piap.pl>,
Russell King <linux@arm.linux.org.uk>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/16] ARM: cns3xxx: convert PCI to use generic config accesses
Date: Fri, 9 Jan 2015 20:34:40 -0600 [thread overview]
Message-ID: <1420857290-8373-7-git-send-email-robh@kernel.org> (raw)
In-Reply-To: <1420857290-8373-1-git-send-email-robh@kernel.org>
Convert the cns3xxx PCI driver to use the generic config access functions.
This changes accesses from __raw_readl/__raw_writel to readl/writel.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
---
arch/arm/mach-cns3xxx/pcie.c | 52 +++++++++-----------------------------------
1 file changed, 10 insertions(+), 42 deletions(-)
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 45d6bd0..19b4e20 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -54,8 +54,8 @@ static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
return sysdata_to_cnspci(bus->sysdata);
}
-static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
- unsigned int devfn, int where)
+static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
{
struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
int busno = bus->number;
@@ -91,55 +91,22 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
- u32 v;
- void __iomem *base;
+ int ret;
u32 mask = (0x1ull << (size * 8)) - 1;
int shift = (where % 4) * 8;
- base = cns3xxx_pci_cfg_base(bus, devfn, where);
- if (!base) {
- *val = 0xffffffff;
- return PCIBIOS_SUCCESSFUL;
- }
-
- v = __raw_readl(base);
+ ret = pci_generic_config_read32(bus, devfn, where, size, val);
- if (bus->number == 0 && devfn == 0 &&
- (where & 0xffc) == PCI_CLASS_REVISION) {
+ if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
+ (where & 0xffc) == PCI_CLASS_REVISION)
/*
* RC's class is 0xb, but Linux PCI driver needs 0x604
* for a PCIe bridge. So we must fixup the class code
* to 0x604 here.
*/
- v &= 0xff;
- v |= 0x604 << 16;
- }
-
- *val = (v >> shift) & mask;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 v;
- void __iomem *base;
- u32 mask = (0x1ull << (size * 8)) - 1;
- int shift = (where % 4) * 8;
-
- base = cns3xxx_pci_cfg_base(bus, devfn, where);
- if (!base)
- return PCIBIOS_SUCCESSFUL;
-
- v = __raw_readl(base);
-
- v &= ~(mask << shift);
- v |= (val & mask) << shift;
-
- __raw_writel(v, base);
+ *val = (((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask;
- return PCIBIOS_SUCCESSFUL;
+ return ret;
}
static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
@@ -158,8 +125,9 @@ static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
}
static struct pci_ops cns3xxx_pcie_ops = {
+ .map_bus = cns3xxx_pci_map_bus,
.read = cns3xxx_pci_read_config,
- .write = cns3xxx_pci_write_config,
+ .write = pci_generic_config_write,
};
static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
--
2.1.0
next prev parent reply other threads:[~2015-01-10 2:35 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-10 2:34 [PATCH 00/16] PCI generic configuration space accessors Rob Herring
2015-01-10 2:34 ` [PATCH 01/16] frv: add struct pci_ops member names to initialization Rob Herring
2015-01-10 2:34 ` [PATCH 02/16] mips: " Rob Herring
2015-01-10 2:34 ` [PATCH 03/16] mn10300: " Rob Herring
2015-01-10 2:34 ` [PATCH 04/16] powerpc: " Rob Herring
2015-01-10 2:34 ` [PATCH 05/16] pci: introduce common pci config space accessors Rob Herring
2015-01-12 10:01 ` Thierry Reding
2015-01-12 10:04 ` Thierry Reding
2015-01-10 2:34 ` Rob Herring [this message]
2015-01-29 6:16 ` [PATCH 06/16] ARM: cns3xxx: convert PCI to use generic config accesses Krzysztof Hałasa
2015-01-29 14:35 ` Bjorn Helgaas
2015-01-10 2:34 ` [PATCH 07/16] ARM: integrator: " Rob Herring
2015-01-10 21:40 ` Linus Walleij
2015-01-10 21:53 ` Arnd Bergmann
2015-01-12 0:05 ` Linus Walleij
2015-01-22 20:33 ` Bjorn Helgaas
2015-01-26 18:22 ` Bjorn Helgaas
2015-01-26 23:22 ` Linus Walleij
2015-01-10 2:34 ` [PATCH 08/16] ARM: sa1100: " Rob Herring
2015-01-10 2:34 ` [PATCH 09/16] ARM: ks8695: " Rob Herring
2015-01-12 12:38 ` Greg Ungerer
2015-01-10 2:34 ` [PATCH 10/16] powerpc: fsl_pci: " Rob Herring
2015-01-10 2:34 ` [PATCH 11/16] powerpc: powermac: " Rob Herring
2015-01-10 2:34 ` [PATCH 12/16] pci/host: generic: convert " Rob Herring
2015-01-12 17:51 ` Will Deacon
2015-01-10 2:34 ` [PATCH 13/16] pci/host: rcar-gen2: " Rob Herring
2015-01-12 9:25 ` Geert Uytterhoeven
2015-01-10 2:34 ` [PATCH 14/16] pci/host: tegra: " Rob Herring
2015-01-12 10:07 ` Thierry Reding
2015-01-10 2:34 ` [PATCH 15/16] pci/host: xgene: " Rob Herring
2015-01-10 2:34 ` [PATCH 16/16] pci/host: xilinx: " Rob Herring
2015-01-22 21:03 ` [PATCH 00/16] PCI generic configuration space accessors Bjorn Helgaas
2015-01-22 23:47 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420857290-8373-7-git-send-email-robh@kernel.org \
--to=robh@kernel.org \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=khalasa@piap.pl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).