linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, Russell King <linux@arm.linux.org.uk>,
	Linus Walleij <linus.walleij@linaro.org>,
	Arnd Bergmann <arnd@arndb.de>, Rob Herring <robh@kernel.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>
Subject: [PATCH v2 1/3] dt/bindings: add versatile PCI binding
Date: Wed, 28 Jan 2015 10:16:16 -0600	[thread overview]
Message-ID: <1422461778-6769-2-git-send-email-robh@kernel.org> (raw)
In-Reply-To: <1422461778-6769-1-git-send-email-robh@kernel.org>

Add binding documentation for the PCI controller found on Versatile PB
boards.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
---
 .../devicetree/bindings/pci/versatile.txt          | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/versatile.txt

diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt
new file mode 100644
index 0000000..2cc6071
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/versatile.txt
@@ -0,0 +1,59 @@
+* ARM Versatile Platform Baseboard PCI interface
+
+PCI host controller found on the ARM Versatile PB board's FPGA.
+
+Required properties:
+- compatible: should contain "arm,versatile-pci" to identify the Versatile PCI
+  controller.
+- reg: base addresses and lengths of the pci controller. There must be 3
+  entries:
+	- Versatile specific registers
+	- Self Config space
+	- Config space
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- bus-range: set to <0 0xff>
+- ranges: ranges for the PCI memory and I/O regions
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties	to define
+	the mapping of the PCI interface to interrupt numbers.
+
+Example:
+
+pci-controller@10001000 {
+	compatible = "arm,versatile-pci";
+	device_type = "pci";
+	reg = <0x10001000 0x1000
+	       0x41000000 0x10000
+	       0x42000000 0x100000>;
+	bus-range = <0 0xff>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+	#interrupt-cells = <1>;
+
+	ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000   /* downstream I/O */
+		  0x02000000 0 0x50000000 0x50000000 0 0x10000000   /* non-prefetchable memory */
+		  0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
+
+	interrupt-map-mask = <0x1800 0 0 7>;
+	interrupt-map = <0x1800 0 0 1 &sic 28
+			 0x1800 0 0 2 &sic 29
+			 0x1800 0 0 3 &sic 30
+			 0x1800 0 0 4 &sic 27
+
+			 0x1000 0 0 1 &sic 27
+			 0x1000 0 0 2 &sic 28
+			 0x1000 0 0 3 &sic 29
+			 0x1000 0 0 4 &sic 30
+
+			 0x0800 0 0 1 &sic 30
+			 0x0800 0 0 2 &sic 27
+			 0x0800 0 0 3 &sic 28
+			 0x0800 0 0 4 &sic 29
+
+			 0x0000 0 0 1 &sic 29
+			 0x0000 0 0 2 &sic 30
+			 0x0000 0 0 3 &sic 27
+			 0x0000 0 0 4 &sic 28>;
+};
-- 
2.1.0


  reply	other threads:[~2015-01-29  3:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-28 16:16 [PATCH v2 0/3] Versatile PCI host DT support Rob Herring
2015-01-28 16:16 ` Rob Herring [this message]
2015-01-28 16:16 ` [PATCH v2 2/3] dts: versatile: add PCI controller binding Rob Herring
2015-01-28 16:16 ` [PATCH v2 3/3] PCI: add DT based ARM Versatile PCI host driver Rob Herring
2015-01-28 23:53 ` [PATCH v2 0/3] Versatile PCI host DT support Bjorn Helgaas
2015-01-29  9:22 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422461778-6769-2-git-send-email-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linus.walleij@linaro.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).