From: Yinghai Lu <yinghai@kernel.org>
To: Matt Fleming <matt.fleming@intel.com>,
"H. Peter Anvin" <hpa@zytor.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Jiri Kosina <jkosina@suse.cz>,
Borislav Petkov <bp@suse.de>, Baoquan He <bhe@redhat.com>,
linux-kernel@vger.kernel.org, linux-efi@vger.kernel.org,
linux-pci@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v2 13/15] x86, pci: convert SETUP_PCI data to list
Date: Wed, 4 Mar 2015 00:00:46 -0800 [thread overview]
Message-ID: <1425456048-16236-14-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1425456048-16236-1-git-send-email-yinghai@kernel.org>
So we could avoid ioremap every time later.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/pci.h | 2 ++
arch/x86/kernel/setup.c | 1 +
arch/x86/pci/common.c | 77 +++++++++++++++++++++++++++++++++++++---------
3 files changed, 65 insertions(+), 15 deletions(-)
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 7fbd5f3..99b261f 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -88,9 +88,11 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
*strategy_parameter = ~0UL;
}
void add_pci(u64 pa_data);
+int fill_setup_pci_entries(void);
#else
static inline void early_quirks(void) { }
static inline void add_pci(u64 pa_data) { }
+static inline int fill_setup_pci_entries(void) { }
#endif
extern void pci_iommu_alloc(void);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 9a18078..215bea8 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1190,6 +1190,7 @@ void __init setup_arch(char **cmdline_p)
acpi_boot_init();
sfi_init();
x86_dtb_init();
+ fill_setup_pci_entries();
/*
* get boot-time SMP configuration:
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 4846db7..93577fb 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -668,7 +668,7 @@ unsigned int pcibios_assign_all_busses(void)
return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
}
-static u64 pci_setup_data;
+static u64 pci_setup_data __initdata;
void __init add_pci(u64 pa_data)
{
struct setup_data *data;
@@ -680,36 +680,83 @@ void __init add_pci(u64 pa_data)
early_memunmap(data, sizeof(*data));
}
-int pcibios_add_device(struct pci_dev *dev)
+struct firmware_setup_pci_entry {
+ struct list_head list;
+ uint16_t vendor;
+ uint16_t devid;
+ uint64_t pcilen;
+ unsigned long segment;
+ unsigned long bus;
+ unsigned long device;
+ unsigned long function;
+ phys_addr_t romdata;
+};
+
+static LIST_HEAD(setup_pci_entries);
+
+int __init fill_setup_pci_entries(void)
{
struct setup_data *data;
struct pci_setup_rom *rom;
+ struct firmware_setup_pci_entry *entry;
+ phys_addr_t pa_entry;
u64 pa_data;
pa_data = pci_setup_data;
while (pa_data) {
- data = ioremap(pa_data, sizeof(*rom));
+ data = early_memremap(pa_data, sizeof(*rom));
if (!data)
return -ENOMEM;
-
rom = (struct pci_setup_rom *)data;
- if ((pci_domain_nr(dev->bus) == rom->segment) &&
- (dev->bus->number == rom->bus) &&
- (PCI_SLOT(dev->devfn) == rom->device) &&
- (PCI_FUNC(dev->devfn) == rom->function) &&
- (dev->vendor == rom->vendor) &&
- (dev->device == rom->devid)) {
- dev->rom = pa_data +
- offsetof(struct pci_setup_rom, romdata);
- dev->romlen = rom->pcilen;
+ pa_entry = memblock_alloc(sizeof(*entry), sizeof(long));
+ if (!pa_entry) {
+ early_memunmap(data, sizeof(*rom));
+ return -ENOMEM;
+ }
+
+ entry = phys_to_virt(pa_entry);
+ entry->segment = rom->segment;
+ entry->bus = rom->bus;
+ entry->device = rom->device;
+ entry->function = rom->function;
+ entry->vendor = rom->vendor;
+ entry->devid = rom->devid;
+ entry->pcilen = rom->pcilen;
+ entry->romdata = pa_data +
+ offsetof(struct pci_setup_rom, romdata);
+
+ list_add(&entry->list, &setup_pci_entries);
+
+ memblock_free(pa_data, sizeof(*rom));
+ pa_data = data->next;
+ early_memunmap(data, sizeof(*rom));
+ }
+
+ pci_setup_data = 0;
+
+ return 0;
+}
+
+int pcibios_add_device(struct pci_dev *dev)
+{
+ struct firmware_setup_pci_entry *entry;
+
+ list_for_each_entry(entry, &setup_pci_entries, list) {
+ if ((pci_domain_nr(dev->bus) == entry->segment) &&
+ (dev->bus->number == entry->bus) &&
+ (PCI_SLOT(dev->devfn) == entry->device) &&
+ (PCI_FUNC(dev->devfn) == entry->function) &&
+ (dev->vendor == entry->vendor) &&
+ (dev->device == entry->devid)) {
+ dev->rom = entry->romdata;
+ dev->romlen = entry->pcilen;
dev_printk(KERN_DEBUG, &dev->dev, "set rom to [%#010lx, %#010lx] via SETUP_PCI\n",
(unsigned long)dev->rom,
(unsigned long)(dev->rom + dev->romlen - 1));
}
- pa_data = data->next;
- iounmap(data);
}
+
return 0;
}
--
1.8.4.5
next prev parent reply other threads:[~2015-03-04 8:01 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-04 8:00 [PATCH v2 00/15] x86, boot: clean up kasl and setup_data handling Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 01/15] x86, kaslr: Use init_size instead of run_size Yinghai Lu
2015-03-06 13:55 ` Borislav Petkov
2015-03-06 18:44 ` Yinghai Lu
2015-03-06 18:55 ` Kees Cook
2015-03-06 19:28 ` Yinghai Lu
2015-03-06 19:56 ` Kees Cook
2015-03-07 0:52 ` Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 02/15] x86, boot: move ZO to end of buffer Yinghai Lu
2015-03-06 13:58 ` Borislav Petkov
2015-03-04 8:00 ` [PATCH v2 03/15] x86, boot: keep data from ZO boot stage to VO kernel stage Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 04/15] x86, kaslr: get kaslr_enabled back correctly Yinghai Lu
2015-03-04 10:16 ` Borislav Petkov
2015-03-04 15:54 ` Jiri Kosina
2015-03-04 18:12 ` Yinghai Lu
2015-03-04 19:41 ` Ingo Molnar
2015-03-05 2:58 ` joeyli
2015-03-05 3:20 ` Yinghai Lu
2015-03-04 18:06 ` Yinghai Lu
2015-03-04 18:56 ` Yinghai Lu
2015-03-04 20:00 ` Ingo Molnar
2015-03-04 21:32 ` Yinghai Lu
2015-03-06 13:33 ` Borislav Petkov
2015-03-06 17:49 ` Yinghai Lu
2015-03-07 20:50 ` Borislav Petkov
2015-03-06 19:50 ` Yinghai Lu
2015-03-06 19:53 ` Yinghai Lu
2015-03-07 21:05 ` Borislav Petkov
2015-03-07 21:11 ` Yinghai Lu
2015-03-07 20:56 ` Borislav Petkov
2015-03-04 8:00 ` [PATCH v2 05/15] x86, kaslr: consolidate the mem_avoid filling Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 06/15] x86, boot: split kernel_ident_mapping_init into another file Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 07/15] x86, kaslr, 64bit: set new or extra ident_mapping Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 08/15] x86: Kill E820_RESERVED_KERN Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 09/15] x86, efi: copy SETUP_EFI data and access directly Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 10/15] x86, of: let add_dtb reserve by itself Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 11/15] x86, boot: Add add_pci handler for SETUP_PCI Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 12/15] x86: kill not used setup_data handling code Yinghai Lu
2015-03-04 8:00 ` Yinghai Lu [this message]
2015-03-04 8:00 ` [PATCH v2 14/15] x86, boot: copy rom to kernel space Yinghai Lu
2015-03-04 8:00 ` [PATCH v2 15/15] x86, pci: export SETUP_PCI data via sysfs Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425456048-16236-14-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhe@redhat.com \
--cc=bhelgaas@google.com \
--cc=bp@suse.de \
--cc=hpa@zytor.com \
--cc=jkosina@suse.cz \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=matt.fleming@intel.com \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).