From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: bhelgaas@google.com, benh@au1.ibm.com, gwshan@linux.vnet.ibm.com
Cc: linux-pci@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
Wei Yang <weiyang@linux.vnet.ibm.com>
Subject: [PATCH V15 12/21] PCI: Consider additional PF's IOV BAR alignment in sizing and assigning
Date: Wed, 25 Mar 2015 13:44:48 +0800 [thread overview]
Message-ID: <1427262297-5694-13-git-send-email-weiyang@linux.vnet.ibm.com> (raw)
In-Reply-To: <1427262297-5694-1-git-send-email-weiyang@linux.vnet.ibm.com>
When sizing and assigning resources, we divide the resources into two
lists: the requested list and the additional list. We don't consider the
alignment of additional VF(n) BAR space.
This is because the alignment required for the VF(n) BAR space is the size
of an individual VF BAR, not the size of the space for *all* VFs. But we
want additional alignment to support partitioning on PowerNV.
Consider the additional IOV BAR alignment when sizing and assigning
resources. When there is not enough system MMIO space to accomodate both
the requested list and the additional list, the PF's IOV BAR alignment will
not contribute to the bridge. When there is enough system MMIO space for
both lists, the additional alignment will contribute to the bridge.
The additional alignment is stored in the min_align of pci_dev_resource,
which is stored in the additional list by add_to_list() at the end of
pbus_size_mem(). The additional alignment is calculated in
pci_resource_alignment(). For an IOV BAR, we have arch dependent function
to get the alignment for different arch.
[bhelgaas: changelog, printk cast]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/setup-bus.c | 95 +++++++++++++++++++++++++++++++++++++++--------
1 file changed, 79 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index e3e17f3..6603d40 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -99,8 +99,8 @@ static void remove_from_list(struct list_head *head,
}
}
-static resource_size_t get_res_add_size(struct list_head *head,
- struct resource *res)
+static struct pci_dev_resource *res_to_dev_res(struct list_head *head,
+ struct resource *res)
{
struct pci_dev_resource *dev_res;
@@ -109,17 +109,37 @@ static resource_size_t get_res_add_size(struct list_head *head,
int idx = res - &dev_res->dev->resource[0];
dev_printk(KERN_DEBUG, &dev_res->dev->dev,
- "res[%d]=%pR get_res_add_size add_size %llx\n",
+ "res[%d]=%pR res_to_dev_res add_size %llx min_align %llx\n",
idx, dev_res->res,
- (unsigned long long)dev_res->add_size);
+ (unsigned long long)dev_res->add_size,
+ (unsigned long long)dev_res->min_align);
- return dev_res->add_size;
+ return dev_res;
}
}
- return 0;
+ return NULL;
}
+static resource_size_t get_res_add_size(struct list_head *head,
+ struct resource *res)
+{
+ struct pci_dev_resource *dev_res;
+
+ dev_res = res_to_dev_res(head, res);
+ return dev_res ? dev_res->add_size : 0;
+}
+
+static resource_size_t get_res_add_align(struct list_head *head,
+ struct resource *res)
+{
+ struct pci_dev_resource *dev_res;
+
+ dev_res = res_to_dev_res(head, res);
+ return dev_res ? dev_res->min_align : 0;
+}
+
+
/* Sort resources by alignment */
static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head)
{
@@ -215,7 +235,7 @@ static void reassign_resources_sorted(struct list_head *realloc_head,
struct resource *res;
struct pci_dev_resource *add_res, *tmp;
struct pci_dev_resource *dev_res;
- resource_size_t add_size;
+ resource_size_t add_size, align;
int idx;
list_for_each_entry_safe(add_res, tmp, realloc_head, list) {
@@ -238,13 +258,13 @@ static void reassign_resources_sorted(struct list_head *realloc_head,
idx = res - &add_res->dev->resource[0];
add_size = add_res->add_size;
+ align = add_res->min_align;
if (!resource_size(res)) {
- res->start = add_res->start;
+ res->start = align;
res->end = res->start + add_size - 1;
if (pci_assign_resource(add_res->dev, idx))
reset_resource(res);
} else {
- resource_size_t align = add_res->min_align;
res->flags |= add_res->flags &
(IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN);
if (pci_reassign_resource(add_res->dev, idx,
@@ -368,8 +388,9 @@ static void __assign_resources_sorted(struct list_head *head,
LIST_HEAD(save_head);
LIST_HEAD(local_fail_head);
struct pci_dev_resource *save_res;
- struct pci_dev_resource *dev_res, *tmp_res;
+ struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
unsigned long fail_type;
+ resource_size_t add_align, align;
/* Check if optional add_size is there */
if (!realloc_head || list_empty(realloc_head))
@@ -384,10 +405,44 @@ static void __assign_resources_sorted(struct list_head *head,
}
/* Update res in head list with add_size in realloc_head list */
- list_for_each_entry(dev_res, head, list)
+ list_for_each_entry_safe(dev_res, tmp_res, head, list) {
dev_res->res->end += get_res_add_size(realloc_head,
dev_res->res);
+ /*
+ * There are two kinds of additional resources in the list:
+ * 1. bridge resource -- IORESOURCE_STARTALIGN
+ * 2. SR-IOV resource -- IORESOURCE_SIZEALIGN
+ * Here just fix the additional alignment for bridge
+ */
+ if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
+ continue;
+
+ add_align = get_res_add_align(realloc_head, dev_res->res);
+
+ /*
+ * The "head" list is sorted by the alignment to make sure
+ * resources with bigger alignment will be assigned first.
+ * After we change the alignment of a dev_res in "head" list,
+ * we need to reorder the list by alignment to make it
+ * consistent.
+ */
+ if (add_align > dev_res->res->start) {
+ dev_res->res->start = add_align;
+ dev_res->res->end = add_align +
+ resource_size(dev_res->res);
+
+ list_for_each_entry(dev_res2, head, list) {
+ align = pci_resource_alignment(dev_res2->dev,
+ dev_res2->res);
+ if (add_align > align)
+ list_move_tail(&dev_res->list,
+ &dev_res2->list);
+ }
+ }
+
+ }
+
/* Try updated head list with add_size added */
assign_requested_resources_sorted(head, &local_fail_head);
@@ -962,6 +1017,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
struct resource *b_res = find_free_bus_resource(bus,
mask | IORESOURCE_PREFETCH, type);
resource_size_t children_add_size = 0;
+ resource_size_t children_add_align = 0;
+ resource_size_t add_align = 0;
if (!b_res)
return -ENOSPC;
@@ -986,6 +1043,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
/* put SRIOV requested res to the optional list */
if (realloc_head && i >= PCI_IOV_RESOURCES &&
i <= PCI_IOV_RESOURCE_END) {
+ add_align = max(pci_resource_alignment(dev, r), add_align);
r->end = r->start - 1;
add_to_list(realloc_head, dev, r, r_size, 0/* don't care */);
children_add_size += r_size;
@@ -1016,19 +1074,23 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (order > max_order)
max_order = order;
- if (realloc_head)
+ if (realloc_head) {
children_add_size += get_res_add_size(realloc_head, r);
+ children_add_align = get_res_add_align(realloc_head, r);
+ add_align = max(add_align, children_add_align);
+ }
}
}
min_align = calculate_mem_align(aligns, max_order);
min_align = max(min_align, window_alignment(bus, b_res->flags));
size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
+ add_align = max(min_align, add_align);
if (children_add_size > add_size)
add_size = children_add_size;
size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
calculate_memsize(size, min_size, add_size,
- resource_size(b_res), min_align);
+ resource_size(b_res), add_align);
if (!size0 && !size1) {
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
@@ -1040,10 +1102,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
b_res->end = size0 + min_align - 1;
b_res->flags |= IORESOURCE_STARTALIGN;
if (size1 > size0 && realloc_head) {
- add_to_list(realloc_head, bus->self, b_res, size1-size0, min_align);
- dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx\n",
+ add_to_list(realloc_head, bus->self, b_res, size1-size0, add_align);
+ dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx add_align %llx\n",
b_res, &bus->busn_res,
- (unsigned long long)size1-size0);
+ (unsigned long long) (size1 - size0),
+ (unsigned long long) add_align);
}
return 0;
}
--
1.7.9.5
next prev parent reply other threads:[~2015-03-25 5:55 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-25 5:44 [PATCH V15 00/21] Enable SRIOV on POWER8 Wei Yang
2015-03-25 5:44 ` [PATCH V15 01/21] powerpc/pci: Refactor pci_dn Wei Yang
2015-03-25 5:44 ` [PATCH V15 02/21] powerpc/powernv: Use pci_dn, not device_node, in PCI config accessor Wei Yang
2015-03-25 5:44 ` [PATCH V15 03/21] PCI: Print more info in sriov_enable() error message Wei Yang
2015-03-25 5:44 ` [PATCH V15 04/21] PCI: Print PF SR-IOV resource that contains all VF(n) BAR space Wei Yang
2015-03-25 5:44 ` [PATCH V15 05/21] PCI: Keep individual VF BAR size in struct pci_sriov Wei Yang
2015-03-25 5:44 ` [PATCH V15 06/21] PCI: Index IOV resources in the conventional style Wei Yang
2015-03-25 5:44 ` [PATCH V15 07/21] PCI: Refresh First VF Offset and VF Stride when updating NumVFs Wei Yang
2015-03-25 5:44 ` [PATCH V15 08/21] PCI: Calculate maximum number of buses required for VFs Wei Yang
2015-03-25 5:44 ` [PATCH V15 09/21] PCI: Export pci_iov_virtfn_bus() and pci_iov_virtfn_devfn() Wei Yang
2015-03-25 5:44 ` [PATCH V15 10/21] PCI: Add pcibios_sriov_enable() and pcibios_sriov_disable() Wei Yang
2015-03-25 5:44 ` [PATCH V15 11/21] PCI: Add pcibios_iov_resource_alignment() interface Wei Yang
2015-03-25 5:44 ` Wei Yang [this message]
2015-03-25 5:44 ` [PATCH V15 13/21] powerpc/pci: Don't unset PCI resources for VFs Wei Yang
2015-03-25 5:44 ` [PATCH V15 14/21] powerpc/powernv: Allocate struct pnv_ioda_pe iommu_table dynamically Wei Yang
2015-03-25 5:44 ` [PATCH V15 15/21] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2015-03-25 5:44 ` [PATCH V15 16/21] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2015-03-25 5:44 ` [PATCH V15 17/21] powerpc/powernv: Shift VF resource with an offset Wei Yang
2015-03-25 5:44 ` [PATCH V15 18/21] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-03-25 5:44 ` [PATCH V15 19/21] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2015-03-25 5:44 ` [PATCH V15 20/21] powerpc/pci: Remove unused struct pci_dn.pcidev field Wei Yang
2015-03-25 5:44 ` [PATCH V15 21/21] powerpc/pci: Add PCI resource alignment documentation Wei Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427262297-5694-13-git-send-email-weiyang@linux.vnet.ibm.com \
--to=weiyang@linux.vnet.ibm.com \
--cc=benh@au1.ibm.com \
--cc=bhelgaas@google.com \
--cc=gwshan@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).