From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: bhelgaas@google.com, benh@au1.ibm.com, gwshan@linux.vnet.ibm.com
Cc: linux-pci@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
Wei Yang <weiyang@linux.vnet.ibm.com>
Subject: [PATCH V15 13/21] powerpc/pci: Don't unset PCI resources for VFs
Date: Wed, 25 Mar 2015 13:44:49 +0800 [thread overview]
Message-ID: <1427262297-5694-14-git-send-email-weiyang@linux.vnet.ibm.com> (raw)
In-Reply-To: <1427262297-5694-1-git-send-email-weiyang@linux.vnet.ibm.com>
Flag PCI_REASSIGN_ALL_RSRC is used to ignore resources information setup by
firmware, so that kernel would re-assign all resources of pci devices.
On powerpc arch, this happens in a header fixup function
pcibios_fixup_resources(), which will clean up the resources if this flag
is set. This works fine for PFs, since after clean up, kernel will
re-assign the resources in pcibios_resource_survey().
Below is a simple call flow on how it works:
pcibios_init
pcibios_scan_phb
pci_scan_child_bus
...
pci_device_add
pci_fixup_device(pci_fixup_header)
pcibios_fixup_resources # header fixup
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
dev->resource[i].start = 0
pcibios_resource_survey # re-assign
pcibios_allocate_resources
However, the VF resources won't be re-assigned, since the VF resources are
completely determined by the PF resources, and the PF resources have
already been reassigned. This means we need to leave VF's resources
un-cleared in pcibios_fixup_resources().
In this patch, we skip the resource unset process in
pcibios_fixup_resources(), if the pci_dev is a VF.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
---
arch/powerpc/kernel/pci-common.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 2a525c9..8203101 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -788,6 +788,10 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
pci_name(dev));
return;
}
+
+ if (dev->is_virtfn)
+ return;
+
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
struct resource *res = dev->resource + i;
struct pci_bus_region reg;
--
1.7.9.5
next prev parent reply other threads:[~2015-03-25 5:55 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-25 5:44 [PATCH V15 00/21] Enable SRIOV on POWER8 Wei Yang
2015-03-25 5:44 ` [PATCH V15 01/21] powerpc/pci: Refactor pci_dn Wei Yang
2015-03-25 5:44 ` [PATCH V15 02/21] powerpc/powernv: Use pci_dn, not device_node, in PCI config accessor Wei Yang
2015-03-25 5:44 ` [PATCH V15 03/21] PCI: Print more info in sriov_enable() error message Wei Yang
2015-03-25 5:44 ` [PATCH V15 04/21] PCI: Print PF SR-IOV resource that contains all VF(n) BAR space Wei Yang
2015-03-25 5:44 ` [PATCH V15 05/21] PCI: Keep individual VF BAR size in struct pci_sriov Wei Yang
2015-03-25 5:44 ` [PATCH V15 06/21] PCI: Index IOV resources in the conventional style Wei Yang
2015-03-25 5:44 ` [PATCH V15 07/21] PCI: Refresh First VF Offset and VF Stride when updating NumVFs Wei Yang
2015-03-25 5:44 ` [PATCH V15 08/21] PCI: Calculate maximum number of buses required for VFs Wei Yang
2015-03-25 5:44 ` [PATCH V15 09/21] PCI: Export pci_iov_virtfn_bus() and pci_iov_virtfn_devfn() Wei Yang
2015-03-25 5:44 ` [PATCH V15 10/21] PCI: Add pcibios_sriov_enable() and pcibios_sriov_disable() Wei Yang
2015-03-25 5:44 ` [PATCH V15 11/21] PCI: Add pcibios_iov_resource_alignment() interface Wei Yang
2015-03-25 5:44 ` [PATCH V15 12/21] PCI: Consider additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2015-03-25 5:44 ` Wei Yang [this message]
2015-03-25 5:44 ` [PATCH V15 14/21] powerpc/powernv: Allocate struct pnv_ioda_pe iommu_table dynamically Wei Yang
2015-03-25 5:44 ` [PATCH V15 15/21] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2015-03-25 5:44 ` [PATCH V15 16/21] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2015-03-25 5:44 ` [PATCH V15 17/21] powerpc/powernv: Shift VF resource with an offset Wei Yang
2015-03-25 5:44 ` [PATCH V15 18/21] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-03-25 5:44 ` [PATCH V15 19/21] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2015-03-25 5:44 ` [PATCH V15 20/21] powerpc/pci: Remove unused struct pci_dn.pcidev field Wei Yang
2015-03-25 5:44 ` [PATCH V15 21/21] powerpc/pci: Add PCI resource alignment documentation Wei Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427262297-5694-14-git-send-email-weiyang@linux.vnet.ibm.com \
--to=weiyang@linux.vnet.ibm.com \
--cc=benh@au1.ibm.com \
--cc=bhelgaas@google.com \
--cc=gwshan@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).