From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: bhelgaas@google.com, benh@au1.ibm.com, gwshan@linux.vnet.ibm.com
Cc: linux-pci@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
Wei Yang <weiyang@linux.vnet.ibm.com>
Subject: [PATCH V15 05/21] PCI: Keep individual VF BAR size in struct pci_sriov
Date: Wed, 25 Mar 2015 13:44:41 +0800 [thread overview]
Message-ID: <1427262297-5694-6-git-send-email-weiyang@linux.vnet.ibm.com> (raw)
In-Reply-To: <1427262297-5694-1-git-send-email-weiyang@linux.vnet.ibm.com>
Currently we don't store the individual VF BAR size. We calculate it when
needed by dividing the PF's IOV resource size (which contains space for
*all* the VFs) by total_VFs or by reading the BAR in the SR-IOV capability
again.
Keep the individual VF BAR size in struct pci_sriov.barsz[], add
pci_iov_resource_size() to retrieve it, and use that instead of doing the
division or reading the SR-IOV capability BAR.
[bhelgaas: rename to "barsz[]", simplify barsz[] index computation, remove
SR-IOV capability BAR sizing]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/iov.c | 39 ++++++++++++++++++++-------------------
drivers/pci/pci.h | 1 +
include/linux/pci.h | 3 +++
3 files changed, 24 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 05f9d97..5bca0e1 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -57,6 +57,14 @@ static void virtfn_remove_bus(struct pci_bus *physbus, struct pci_bus *virtbus)
pci_remove_bus(virtbus);
}
+resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
+{
+ if (!dev->is_physfn)
+ return 0;
+
+ return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
+}
+
static int virtfn_add(struct pci_dev *dev, int id, int reset)
{
int i;
@@ -92,8 +100,7 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
continue;
virtfn->resource[i].name = pci_name(virtfn);
virtfn->resource[i].flags = res->flags;
- size = resource_size(res);
- do_div(size, iov->total_VFs);
+ size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
virtfn->resource[i].start = res->start + size * id;
virtfn->resource[i].end = virtfn->resource[i].start + size - 1;
rc = request_resource(res, &virtfn->resource[i]);
@@ -311,7 +318,7 @@ static void sriov_disable(struct pci_dev *dev)
static int sriov_init(struct pci_dev *dev, int pos)
{
- int i;
+ int i, bar64;
int rc;
int nres;
u32 pgsz;
@@ -360,29 +367,29 @@ found:
pgsz &= ~(pgsz - 1);
pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
+ iov = kzalloc(sizeof(*iov), GFP_KERNEL);
+ if (!iov)
+ return -ENOMEM;
+
nres = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
res = dev->resource + PCI_IOV_RESOURCES + i;
- i += __pci_read_base(dev, pci_bar_unknown, res,
- pos + PCI_SRIOV_BAR + i * 4);
+ bar64 = __pci_read_base(dev, pci_bar_unknown, res,
+ pos + PCI_SRIOV_BAR + i * 4);
if (!res->flags)
continue;
if (resource_size(res) & (PAGE_SIZE - 1)) {
rc = -EIO;
goto failed;
}
+ iov->barsz[i] = resource_size(res);
res->end = res->start + resource_size(res) * total - 1;
dev_info(&dev->dev, "VF(n) BAR%d space: %pR (contains BAR%d for %d VFs)\n",
i, res, i, total);
+ i += bar64;
nres++;
}
- iov = kzalloc(sizeof(*iov), GFP_KERNEL);
- if (!iov) {
- rc = -ENOMEM;
- goto failed;
- }
-
iov->pos = pos;
iov->nres = nres;
iov->ctrl = ctrl;
@@ -414,6 +421,7 @@ failed:
res->flags = 0;
}
+ kfree(iov);
return rc;
}
@@ -510,14 +518,7 @@ int pci_iov_resource_bar(struct pci_dev *dev, int resno)
*/
resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
{
- struct resource tmp;
- int reg = pci_iov_resource_bar(dev, resno);
-
- if (!reg)
- return 0;
-
- __pci_read_base(dev, pci_bar_unknown, &tmp, reg);
- return resource_alignment(&tmp);
+ return pci_iov_resource_size(dev, resno);
}
/**
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 4091f82..5732964 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -247,6 +247,7 @@ struct pci_sriov {
struct pci_dev *dev; /* lowest numbered PF */
struct pci_dev *self; /* this PF */
struct mutex lock; /* lock for VF bus */
+ resource_size_t barsz[PCI_SRIOV_NUM_BARS]; /* VF BAR size */
};
#ifdef CONFIG_PCI_ATS
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 211e9da..1559658 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1675,6 +1675,7 @@ int pci_num_vf(struct pci_dev *dev);
int pci_vfs_assigned(struct pci_dev *dev);
int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs);
int pci_sriov_get_totalvfs(struct pci_dev *dev);
+resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno);
#else
static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
{ return -ENODEV; }
@@ -1686,6 +1687,8 @@ static inline int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
{ return 0; }
static inline int pci_sriov_get_totalvfs(struct pci_dev *dev)
{ return 0; }
+static inline resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
+{ return 0; }
#endif
#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
--
1.7.9.5
next prev parent reply other threads:[~2015-03-25 5:51 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-25 5:44 [PATCH V15 00/21] Enable SRIOV on POWER8 Wei Yang
2015-03-25 5:44 ` [PATCH V15 01/21] powerpc/pci: Refactor pci_dn Wei Yang
2015-03-25 5:44 ` [PATCH V15 02/21] powerpc/powernv: Use pci_dn, not device_node, in PCI config accessor Wei Yang
2015-03-25 5:44 ` [PATCH V15 03/21] PCI: Print more info in sriov_enable() error message Wei Yang
2015-03-25 5:44 ` [PATCH V15 04/21] PCI: Print PF SR-IOV resource that contains all VF(n) BAR space Wei Yang
2015-03-25 5:44 ` Wei Yang [this message]
2015-03-25 5:44 ` [PATCH V15 06/21] PCI: Index IOV resources in the conventional style Wei Yang
2015-03-25 5:44 ` [PATCH V15 07/21] PCI: Refresh First VF Offset and VF Stride when updating NumVFs Wei Yang
2015-03-25 5:44 ` [PATCH V15 08/21] PCI: Calculate maximum number of buses required for VFs Wei Yang
2015-03-25 5:44 ` [PATCH V15 09/21] PCI: Export pci_iov_virtfn_bus() and pci_iov_virtfn_devfn() Wei Yang
2015-03-25 5:44 ` [PATCH V15 10/21] PCI: Add pcibios_sriov_enable() and pcibios_sriov_disable() Wei Yang
2015-03-25 5:44 ` [PATCH V15 11/21] PCI: Add pcibios_iov_resource_alignment() interface Wei Yang
2015-03-25 5:44 ` [PATCH V15 12/21] PCI: Consider additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2015-03-25 5:44 ` [PATCH V15 13/21] powerpc/pci: Don't unset PCI resources for VFs Wei Yang
2015-03-25 5:44 ` [PATCH V15 14/21] powerpc/powernv: Allocate struct pnv_ioda_pe iommu_table dynamically Wei Yang
2015-03-25 5:44 ` [PATCH V15 15/21] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2015-03-25 5:44 ` [PATCH V15 16/21] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2015-03-25 5:44 ` [PATCH V15 17/21] powerpc/powernv: Shift VF resource with an offset Wei Yang
2015-03-25 5:44 ` [PATCH V15 18/21] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-03-25 5:44 ` [PATCH V15 19/21] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2015-03-25 5:44 ` [PATCH V15 20/21] powerpc/pci: Remove unused struct pci_dn.pcidev field Wei Yang
2015-03-25 5:44 ` [PATCH V15 21/21] powerpc/pci: Add PCI resource alignment documentation Wei Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427262297-5694-6-git-send-email-weiyang@linux.vnet.ibm.com \
--to=weiyang@linux.vnet.ibm.com \
--cc=benh@au1.ibm.com \
--cc=bhelgaas@google.com \
--cc=gwshan@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).