From: "Michael S. Tsirkin" <mst@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>,
linux-pci@vger.kernel.org, Fam Zheng <famz@redhat.com>,
Yinghai Lu <yhlu.kernel.send@gmail.com>
Subject: [PATCH v4 03/10] pci: drop some duplicate code
Date: Thu, 26 Mar 2015 12:37:34 +0100 [thread overview]
Message-ID: <1427369811-11721-4-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1427369811-11721-1-git-send-email-mst@redhat.com>
pci_msi_init_pci_dev and pci_msi_off share a lot of code.
This used to be justified since pci_msi_init_pci_dev
wasn't compiled in when CONFIG_PCI_MSI is off.
Now that it is, let's reuse code.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
drivers/pci/pci.c | 23 ++++-------------------
drivers/pci/probe.c | 11 ++++-------
2 files changed, 8 insertions(+), 26 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 81f06e8..fcee8ea 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3106,26 +3106,11 @@ EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx);
*/
void pci_msi_off(struct pci_dev *dev)
{
- int pos;
- u16 control;
+ if (dev->msi_cap)
+ pci_msi_set_enable(dev, 0);
- /*
- * This looks like it could go in msi.c, but we need it even when
- * CONFIG_PCI_MSI=n. For the same reason, we can't use
- * dev->msi_cap or dev->msix_cap here.
- */
- pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
- if (pos) {
- pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
- control &= ~PCI_MSI_FLAGS_ENABLE;
- pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
- }
- pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
- if (pos) {
- pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
- control &= ~PCI_MSIX_FLAGS_ENABLE;
- pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
- }
+ if (dev->msix_cap)
+ pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
}
EXPORT_SYMBOL_GPL(pci_msi_off);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 45d6d5c..baf8ddd 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1489,17 +1489,14 @@ static void pci_msi_init_pci_dev(struct pci_dev *dev)
INIT_LIST_HEAD(&dev->msi_list);
#endif
+ dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
+ dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+
/* Disable the msi hardware to avoid screaming interrupts
* during boot. This is the power on reset default so
* usually this should be a noop.
*/
- dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
- if (dev->msi_cap)
- pci_msi_set_enable(dev, 0);
-
- dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
- if (dev->msix_cap)
- pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+ pci_msi_off(dev);
}
static void pci_init_capabilities(struct pci_dev *dev)
--
MST
next prev parent reply other threads:[~2015-03-26 11:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-26 11:37 [PATCH v4 00/10] pci: fix unhandled interrupt on shutdown Michael S. Tsirkin
2015-03-26 11:37 ` [PATCH v4 01/10] pci: export functions for msi/msix ctrl Michael S. Tsirkin
2015-03-26 11:37 ` [PATCH v4 02/10] pci: move pci_msi_init_pci_dev to pci.c Michael S. Tsirkin
2015-03-26 11:37 ` Michael S. Tsirkin [this message]
2015-03-26 12:36 ` [PATCH v4 03/10] pci: drop some duplicate code Yijing Wang
2015-03-26 11:37 ` [PATCH v4 04/10] pci: don't disable msi/msix at shutdown Michael S. Tsirkin
2015-03-26 11:37 ` [PATCH v4 05/10] pci: make msi/msix shutdown functions static Michael S. Tsirkin
2015-03-26 11:37 ` [PATCH v4 06/10] virtio_pci: drop msi_off on probe Michael S. Tsirkin
2015-03-26 11:37 ` [PATCH v4 07/10] ntb: drop pci_msi_off call " Michael S. Tsirkin
2015-03-26 11:37 ` [PATCH v4 08/10] mic: " Michael S. Tsirkin
2015-03-26 11:37 ` [PATCH v4 09/10] pci: drop pci_msi_off calls from quirks Michael S. Tsirkin
2015-03-26 11:38 ` [PATCH v4 10/10] pci: unexport pci_msi_off Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427369811-11721-4-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=bhelgaas@google.com \
--cc=famz@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=yhlu.kernel.send@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).