From: Jayachandran C <jchandra@broadcom.com>
To: Will Deacon <will.deacon@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>, <linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
"Arnd Bergmann" <arnd@arndb.de>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Jayachandran C <jchandra@broadcom.com>,
Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>,
Ming Lei <ming.lei@canonical.com>
Subject: [PATCH v2 1/2] PCI: generic: remove dependency on hw_pci
Date: Tue, 5 May 2015 07:32:12 +0530 [thread overview]
Message-ID: <1430791333-26013-1-git-send-email-jchandra@broadcom.com> (raw)
The current code in pci-host-generic.c uses pci_common_init_dev()
from the arch/arm/ to do a part of the PCI initialization, and this
prevents it from being used on arm64.
The initialization done by pci_common_init_dev() that is really
needed by pci-host-generic.c can be done in the same file without
using the hw_pci API of ARM.
The ARM platform requires a pci_sys_data as sysdata for the PCI bus,
this is be handled by setting up 'struct gen_pci' to embed a
pci_sys_data variable as the first element on the ARM platform.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
---
Here's v2 of the patches, this enables use of pci-host-generic on
arm64.
This has been tested on both qemu and fast model for arm64, and on
qemu for arm32.
v1->v2
- Address comments from Arnd Bergmann and Lorenzo Pieralisi
- move contents of gen_pci_init to gen_pci_probe
- assign resources only when !probe_only
- tested on ARM32 with qemu option -M virt
Notes:
- passing a zeroed out pci_sys_data for ARM looks ok, but I haven't
tested it on ARM.
- tested it on ARM64 fast model
- Any information on how this can be tested on arm is welcome.
- There is only one ifdef, and that can be removed when arm64 gets
a sysdata, or when arm loses its sysdata.
drivers/pci/host/pci-host-generic.c | 50 +++++++++++++++++++++++--------------
1 file changed, 31 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
index ba46e58..e9cc559 100644
--- a/drivers/pci/host/pci-host-generic.c
+++ b/drivers/pci/host/pci-host-generic.c
@@ -39,6 +39,9 @@ struct gen_pci_cfg_windows {
};
struct gen_pci {
+#ifdef CONFIG_ARM
+ struct pci_sys_data sys;
+#endif
struct pci_host_bridge host;
struct gen_pci_cfg_windows cfg;
struct list_head resources;
@@ -48,8 +51,7 @@ static void __iomem *gen_pci_map_cfg_bus_cam(struct pci_bus *bus,
unsigned int devfn,
int where)
{
- struct pci_sys_data *sys = bus->sysdata;
- struct gen_pci *pci = sys->private_data;
+ struct gen_pci *pci = bus->sysdata;
resource_size_t idx = bus->number - pci->cfg.bus_range->start;
return pci->cfg.win[idx] + ((devfn << 8) | where);
@@ -64,8 +66,7 @@ static void __iomem *gen_pci_map_cfg_bus_ecam(struct pci_bus *bus,
unsigned int devfn,
int where)
{
- struct pci_sys_data *sys = bus->sysdata;
- struct gen_pci *pci = sys->private_data;
+ struct gen_pci *pci = bus->sysdata;
resource_size_t idx = bus->number - pci->cfg.bus_range->start;
return pci->cfg.win[idx] + ((devfn << 12) | where);
@@ -198,13 +199,6 @@ static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
return 0;
}
-static int gen_pci_setup(int nr, struct pci_sys_data *sys)
-{
- struct gen_pci *pci = sys->private_data;
- list_splice_init(&pci->resources, &sys->resources);
- return 1;
-}
-
static int gen_pci_probe(struct platform_device *pdev)
{
int err;
@@ -214,13 +208,7 @@ static int gen_pci_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
- struct hw_pci hw = {
- .nr_controllers = 1,
- .private_data = (void **)&pci,
- .setup = gen_pci_setup,
- .map_irq = of_irq_parse_and_map_pci,
- .ops = &gen_pci_ops,
- };
+ struct pci_bus *bus;
if (!pci)
return -ENOMEM;
@@ -258,7 +246,31 @@ static int gen_pci_probe(struct platform_device *pdev)
return err;
}
- pci_common_init_dev(dev, &hw);
+ /* do not reassign resource if probe only */
+ if (!pci_has_flag(PCI_PROBE_ONLY))
+ pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+
+ bus = pci_scan_root_bus(dev, 0, &gen_pci_ops, pci, &pci->resources);
+ if (!bus) {
+ dev_err(dev, "Scanning rootbus failed");
+ return -ENODEV;
+ }
+
+ pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+
+ if (!pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ }
+ pci_bus_add_devices(bus);
+
+ /* Configure PCI Express settings */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ struct pci_bus *child;
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+ }
return 0;
}
--
1.9.1
next reply other threads:[~2015-05-05 1:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-05 2:02 Jayachandran C [this message]
2015-05-05 2:02 ` [PATCH v2 2/2] PCI: generic: add arm64 support Jayachandran C
2015-05-05 15:53 ` [PATCH v2 1/2] PCI: generic: remove dependency on hw_pci Will Deacon
2015-05-05 15:58 ` Arnd Bergmann
2015-05-05 16:03 ` Lorenzo Pieralisi
2015-05-06 14:18 ` Lorenzo Pieralisi
2015-05-06 15:18 ` Bjorn Helgaas
2015-05-07 3:32 ` Suravee Suthikulanit
2015-05-12 13:34 ` Bjorn Helgaas
2015-05-12 16:34 ` Lorenzo Pieralisi
2015-05-12 19:20 ` Bjorn Helgaas
2015-05-13 12:47 ` Suravee Suthikulanit
2015-05-13 13:54 ` Bjorn Helgaas
2015-05-13 15:05 ` Suravee Suthikulanit
2015-05-13 15:11 ` Bjorn Helgaas
[not found] ` <20150512000746.GA31418@jayachandranc.netlogicmicro.com>
2015-05-19 23:09 ` Bjorn Helgaas
2015-05-20 17:29 ` Will Deacon
2015-05-20 20:46 ` Bjorn Helgaas
[not found] ` <20150521063729.GB31418@jayachandranc.netlogicmicro.com>
2015-05-26 9:59 ` Will Deacon
2015-05-26 10:38 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430791333-26013-1-git-send-email-jchandra@broadcom.com \
--to=jchandra@broadcom.com \
--cc=Liviu.Dudau@arm.com \
--cc=Suravee.Suthikulpanit@amd.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=ming.lei@canonical.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).