From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>,
stable@vger.kernel.org.#.v3.19+
Subject: [PATCH 1/2] PCI: Add pci_bus_addr_t
Date: Wed, 27 May 2015 17:23:51 -0700 [thread overview]
Message-ID: <1432772632-5139-1-git-send-email-yinghai@kernel.org> (raw)
David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows
to fit in upstream windows") fails to boot on sparc/T5-8:
pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000)
The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA
addresses, i.e., bus addresses returned via the DMA API (dma_map_single(),
etc.), while the PCI core assumed dma_addr_t could hold *any* bus address,
including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so
dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so
they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that
tripped over this mismatch.
Add pci_bus_addr_t, which is wide enough to hold any PCI bus address,
including both raw BAR values and DMA addresses. This will be 64 bits
on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then
dma_addr_t only needs to be wide enough to hold addresses from the DMA API.
Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows")
Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB")
Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com
Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231
Reported-by: David Ahern <david.ahern@oracle.com>
Tested-by: David Ahern <david.ahern@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
[bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at least as wide as dma_addr_t]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
CC: stable@vger.kernel.org # v3.19+
---
drivers/pci/Kconfig | 4 ++++
drivers/pci/bus.c | 10 +++++-----
drivers/pci/probe.c | 12 ++++++------
include/linux/pci.h | 12 +++++++++---
4 files changed, 24 insertions(+), 14 deletions(-)
Index: linux-2.6/drivers/pci/Kconfig
===================================================================
--- linux-2.6.orig/drivers/pci/Kconfig
+++ linux-2.6/drivers/pci/Kconfig
@@ -1,6 +1,10 @@
#
# PCI configuration
#
+config PCI_BUS_ADDR_T_64BIT
+ def_bool y if (ARCH_DMA_ADDR_T_64BIT || 64BIT)
+ depends on PCI
+
config PCI_MSI
bool "Message Signaled Interrupts (MSI and MSI-X)"
depends on PCI
Index: linux-2.6/drivers/pci/bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/bus.c
+++ linux-2.6/drivers/pci/bus.c
@@ -92,11 +92,11 @@ void pci_bus_remove_resources(struct pci
}
static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL};
-#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
static struct pci_bus_region pci_64_bit = {0,
- (dma_addr_t) 0xffffffffffffffffULL};
-static struct pci_bus_region pci_high = {(dma_addr_t) 0x100000000ULL,
- (dma_addr_t) 0xffffffffffffffffULL};
+ (pci_bus_addr_t) 0xffffffffffffffffULL};
+static struct pci_bus_region pci_high = {(pci_bus_addr_t) 0x100000000ULL,
+ (pci_bus_addr_t) 0xffffffffffffffffULL};
#endif
/*
@@ -200,7 +200,7 @@ int pci_bus_alloc_resource(struct pci_bu
resource_size_t),
void *alignf_data)
{
-#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
int rc;
if (res->flags & IORESOURCE_MEM_64) {
Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c
+++ linux-2.6/drivers/pci/probe.c
@@ -254,8 +254,8 @@ int __pci_read_base(struct pci_dev *dev,
}
if (res->flags & IORESOURCE_MEM_64) {
- if ((sizeof(dma_addr_t) < 8 || sizeof(resource_size_t) < 8) &&
- sz64 > 0x100000000ULL) {
+ if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8)
+ && sz64 > 0x100000000ULL) {
res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
res->start = 0;
res->end = 0;
@@ -264,7 +264,7 @@ int __pci_read_base(struct pci_dev *dev,
goto out;
}
- if ((sizeof(dma_addr_t) < 8) && l) {
+ if ((sizeof(pci_bus_addr_t) < 8) && l) {
/* Above 32-bit boundary; try to reallocate */
res->flags |= IORESOURCE_UNSET;
res->start = 0;
@@ -399,7 +399,7 @@ static void pci_read_bridge_mmio_pref(st
struct pci_dev *dev = child->self;
u16 mem_base_lo, mem_limit_lo;
u64 base64, limit64;
- dma_addr_t base, limit;
+ pci_bus_addr_t base, limit;
struct pci_bus_region region;
struct resource *res;
@@ -426,8 +426,8 @@ static void pci_read_bridge_mmio_pref(st
}
}
- base = (dma_addr_t) base64;
- limit = (dma_addr_t) limit64;
+ base = (pci_bus_addr_t) base64;
+ limit = (pci_bus_addr_t) limit64;
if (base != base64) {
dev_err(&dev->dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
Index: linux-2.6/include/linux/pci.h
===================================================================
--- linux-2.6.orig/include/linux/pci.h
+++ linux-2.6/include/linux/pci.h
@@ -577,9 +577,15 @@ int raw_pci_read(unsigned int domain, un
int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 val);
+#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
+typedef u64 pci_bus_addr_t;
+#else
+typedef u32 pci_bus_addr_t;
+#endif
+
struct pci_bus_region {
- dma_addr_t start;
- dma_addr_t end;
+ pci_bus_addr_t start;
+ pci_bus_addr_t end;
};
struct pci_dynids {
@@ -1127,7 +1133,7 @@ int __must_check pci_bus_alloc_resource(
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
-static inline dma_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
+static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
{
struct pci_bus_region region;
next reply other threads:[~2015-05-28 0:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-28 0:23 Yinghai Lu [this message]
2015-05-28 0:23 ` [PATCH 2/2] PCI: Doc updates for pci_bus_addr_t Yinghai Lu
2015-05-29 22:31 ` [PATCH 1/2] PCI: Add pci_bus_addr_t Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432772632-5139-1-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=stable@vger.kernel.org.#.v3.19+ \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).