From: Kishon Vijay Abraham I <kishon@ti.com>
To: <bhelgaas@google.com>, <jingoohan1@gmail.com>,
<pratyush.anand@gmail.com>, <linux-omap@vger.kernel.org>,
<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<kishon@ti.com>
Cc: <nsekhar@ti.com>
Subject: [PATCH 3/3] PCI: host: pci-dra7xx: add pm support to pci dra7xx
Date: Fri, 3 Jul 2015 16:33:45 +0530 [thread overview]
Message-ID: <1435921425-15121-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1435921425-15121-1-git-send-email-kishon@ti.com>
Add PM support to pci-dra7xx so that PCI clocks can be disabled
during suspend and enabled back during resume without affecting
PCI functionality.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/host/pci-dra7xx.c | 74 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index d8b6d66..1f5c039 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -433,6 +433,79 @@ static int __exit dra7xx_pcie_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int dra7xx_pcie_suspend(struct device *dev)
+{
+ struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
+ struct pcie_port *pp = &dra7xx->pp;
+
+ dw_pcie_suspend_rc(pp);
+
+ return 0;
+}
+
+static int dra7xx_pcie_resume(struct device *dev)
+{
+ struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
+ struct pcie_port *pp = &dra7xx->pp;
+
+ dw_pcie_resume_rc(pp);
+
+ return 0;
+}
+static int dra7xx_pcie_suspend_noirq(struct device *dev)
+{
+ struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
+ int count = dra7xx->phy_count;
+
+ while (count--) {
+ phy_power_off(dra7xx->phy[count]);
+ phy_exit(dra7xx->phy[count]);
+ }
+
+ return 0;
+}
+static int dra7xx_pcie_resume_noirq(struct device *dev)
+{
+ struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
+ int phy_count = dra7xx->phy_count;
+ int ret;
+ int i;
+
+ for (i = 0; i < phy_count; i++) {
+ ret = phy_init(dra7xx->phy[i]);
+ if (ret < 0)
+ goto err_phy;
+
+ ret = phy_power_on(dra7xx->phy[i]);
+ if (ret < 0) {
+ phy_exit(dra7xx->phy[i]);
+ goto err_phy;
+ }
+ }
+
+ return 0;
+
+err_phy:
+ while (--i >= 0) {
+ phy_power_off(dra7xx->phy[i]);
+ phy_exit(dra7xx->phy[i]);
+ }
+
+ return ret;
+}
+
+static const struct dev_pm_ops dra7xx_pcie_pm_ops = {
+ .suspend_noirq = dra7xx_pcie_suspend_noirq,
+ .suspend = dra7xx_pcie_suspend,
+ .resume_noirq = dra7xx_pcie_resume_noirq,
+ .resume = dra7xx_pcie_resume,
+};
+#define DEV_PM_OPS (&dra7xx_pcie_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
static const struct of_device_id of_dra7xx_pcie_match[] = {
{ .compatible = "ti,dra7-pcie", },
{},
@@ -444,6 +517,7 @@ static struct platform_driver dra7xx_pcie_driver = {
.driver = {
.name = "dra7-pcie",
.of_match_table = of_dra7xx_pcie_match,
+ .pm = DEV_PM_OPS,
},
};
--
1.7.9.5
next prev parent reply other threads:[~2015-07-03 11:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-03 11:03 [PATCH 0/3] J6/J6Eco: Add PM support to PCIe Kishon Vijay Abraham I
2015-07-03 11:03 ` [PATCH 1/3] PCI: host: pci-dra7xx: Disable pm_runtime on get_sync failure Kishon Vijay Abraham I
2015-07-03 11:03 ` [PATCH 2/3] PCI: host: pcie-designware: add support for suspend and resume Kishon Vijay Abraham I
2015-07-10 13:22 ` Pratyush Anand
2015-07-10 14:49 ` Kishon Vijay Abraham I
2015-07-10 15:30 ` Pratyush Anand
2015-07-10 15:41 ` Marek Vasut
2015-07-12 10:31 ` Jingoo Han
2015-07-23 12:50 ` Kishon Vijay Abraham I
2015-07-03 11:03 ` Kishon Vijay Abraham I [this message]
2015-07-03 12:04 ` [PATCH 3/3] PCI: host: pci-dra7xx: add pm support to pci dra7xx Grygorii Strashko
2015-07-10 14:50 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435921425-15121-4-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=bhelgaas@google.com \
--cc=jingoohan1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=pratyush.anand@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).