[PATCH 0/3] PCI-e Max Payload Size configuration

[Keith Busch <keith.busch@intel.com>]

This patch series removes arch, driver, and hot-plug specific calls to
configure a PCI-e device's MPS setting. The device is instead configured
in the generic pci-core layer when the device is initially added, and
before it is bound to a driver.

The default policy is also changed from "do nothing" to update the
down stream port to match the upstream port if it is capable.

Dave Jiang (2):
  QIB: Removing usage of pcie_set_mps()
  PCIE: Remove symbol export for pcie_set_mps()

Keith Busch (1):
  pci: Default MPS tuning to match upstream port

 arch/arm/kernel/bios32.c             |   12 ------------
 arch/powerpc/kernel/pci-common.c     |    7 -------
 arch/tile/kernel/pci_gx.c            |    4 ----
 arch/x86/pci/acpi.c                  |    9 ---------
 drivers/infiniband/hw/qib/qib_pcie.c |   27 +--------------------------
 drivers/pci/bus.c                    |    4 ++++
 drivers/pci/hotplug/acpiphp_glue.c   |    1 -
 drivers/pci/hotplug/pciehp_pci.c     |    1 -
 drivers/pci/hotplug/shpchp_pci.c     |    1 -
 drivers/pci/pci.c                    |    1 -
 drivers/pci/probe.c                  |   22 ++++++++++++++++------
 include/linux/pci.h                  |    2 --
 12 files changed, 21 insertions(+), 70 deletions(-)

-- 
1.7.10.4