From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v4 07/52] PCI: Reorder resources list for required/optional resources
Date: Thu, 20 Aug 2015 23:20:22 -0700 [thread overview]
Message-ID: <1440138067-4314-8-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1440138067-4314-1-git-send-email-yinghai@kernel.org>
After we update size and alignment for required+optional resource, we
reorder them with new alignment, but this is only for STARTALIGN.
For SIZEALIGN type resource, after add back add_size, the alignment
get changed, so need to do sorting like STARTALIGN type resources.
Also we need to reorder the sorting back after we restore
resource to required only when required+optional fail to allocate for all.
So move out the reordering code from the loop to separated function,
and call it two times accordingly.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 62 +++++++++++++++++++++++++++++--------------------
1 file changed, 37 insertions(+), 25 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index e4aa93e..555a7a3 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -286,6 +286,31 @@ static inline void reset_resource(struct resource *res)
res->flags = 0;
}
+static void sort_resources(struct list_head *head)
+{
+ struct pci_dev_resource *res1, *tmp_res, *res2;
+
+ list_for_each_entry_safe(res1, tmp_res, head, list) {
+ resource_size_t align1, size1, align2, size2;
+
+ align1 = pci_resource_alignment(res1->dev, res1->res);
+ size1 = resource_size(res1->res);
+
+ /* reorder it */
+ list_for_each_entry(res2, head, list) {
+ if (res2 == res1)
+ break;
+
+ align2 = pci_resource_alignment(res2->dev, res2->res);
+ size2 = resource_size(res2->res);
+ if (is_before(align1, size1, align2, size2)) {
+ list_move_tail(&res1->list, &res2->list);
+ break;
+ }
+ }
+ }
+}
+
/**
* reassign_resources_sorted() - satisfy any additional resource requests
*
@@ -448,9 +473,9 @@ static void __assign_resources_sorted(struct list_head *head,
LIST_HEAD(save_head);
LIST_HEAD(local_fail_head);
struct pci_dev_resource *save_res;
- struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
+ struct pci_dev_resource *dev_res, *tmp_res;
unsigned long fail_type;
- resource_size_t add_align, align;
+ resource_size_t add_align;
/* Check if optional add_size is there */
if (!realloc_head || list_empty(realloc_head))
@@ -465,47 +490,32 @@ static void __assign_resources_sorted(struct list_head *head,
}
/* Update res in head list with add_size in realloc_head list */
- list_for_each_entry_safe(dev_res, tmp_res, head, list) {
+ list_for_each_entry(dev_res, head, list) {
dev_res->res->end += get_res_add_size(realloc_head,
dev_res->res);
/*
* There are two kinds of additional resources in the list:
- * 1. bridge resource -- IORESOURCE_STARTALIGN
- * 2. SR-IOV resource -- IORESOURCE_SIZEALIGN
- * Here just fix the additional alignment for bridge
+ * 1. bridge resource with IORESOURCE_STARTALIGN
+ * need to update start to change alignment
+ * 2. resource with IORESOURCE_SIZEALIGN
+ * update size above already change alignment.
*/
if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
continue;
add_align = get_res_add_align(realloc_head, dev_res->res);
- /*
- * The "head" list is sorted by the alignment to make sure
- * resources with bigger alignment will be assigned first.
- * After we change the alignment of a dev_res in "head" list,
- * we need to reorder the list by alignment to make it
- * consistent.
- */
- if (add_align > dev_res->res->start) {
+ if (add_align) {
resource_size_t r_size = resource_size(dev_res->res);
dev_res->res->start = add_align;
dev_res->res->end = add_align + r_size - 1;
-
- list_for_each_entry(dev_res2, head, list) {
- align = pci_resource_alignment(dev_res2->dev,
- dev_res2->res);
- if (add_align > align) {
- list_move_tail(&dev_res->list,
- &dev_res2->list);
- break;
- }
- }
}
-
}
+ sort_resources(head);
+
/* Try updated head list with add_size added */
assign_requested_resources_sorted(head, &local_fail_head);
@@ -547,6 +557,8 @@ static void __assign_resources_sorted(struct list_head *head,
}
free_list(&save_head);
+ sort_resources(head);
+
requested_and_reassign:
/* Satisfy the must-have resource requests */
assign_requested_resources_sorted(head, fail_head);
--
1.8.4.5
next prev parent reply other threads:[~2015-08-21 6:20 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-21 6:20 [PATCH v4 00/52] PCI: Resource allocation cleanup for v4.3 Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 01/52] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 02/52] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 03/52] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 04/52] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-09-14 20:21 ` Bjorn Helgaas
2015-09-14 21:37 ` Yinghai Lu
2015-09-15 14:57 ` Bjorn Helgaas
2015-09-16 19:33 ` Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 05/52] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 06/52] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-08-21 6:20 ` Yinghai Lu [this message]
2015-08-21 6:20 ` [PATCH v4 08/52] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 09/52] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 10/52] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 11/52] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 12/52] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 13/52] PCI, acpiphp: Add missing realloc list checking after resource allocation Yinghai Lu
2015-08-24 22:09 ` Rafael J. Wysocki
2015-08-24 22:14 ` Yinghai Lu
2015-08-25 0:37 ` Rafael J. Wysocki
2015-08-25 0:14 ` Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 14/52] PCI: Add __add_to_list() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 15/52] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 16/52] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 17/52] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 18/52] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 19/52] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 20/52] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 21/52] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 22/52] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 23/52] PCI: Add support for more than two alt_size under same bridge Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 24/52] PCI: Better support for two alt_size Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 25/52] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 26/52] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 27/52] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 28/52] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 29/52] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 30/52] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 31/52] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 32/52] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 33/52] resources: Split out __allocate_resource() Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 34/52] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 35/52] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 36/52] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 37/52] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 38/52] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 39/52] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 40/52] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 41/52] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 42/52] powerpc/PCI: " Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 43/52] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-08-21 18:18 ` Rob Herring
2015-08-21 18:24 ` Yinghai Lu
2015-08-21 6:20 ` [PATCH v4 44/52] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-08-21 6:21 ` [PATCH v4 45/52] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-08-21 6:21 ` [PATCH v4 46/52] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-08-21 6:21 ` [PATCH v4 47/52] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-08-21 6:21 ` [PATCH v4 48/52] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-08-21 6:21 ` [PATCH v4 49/52] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-08-21 6:21 ` [PATCH v4 50/52] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-08-21 6:21 ` [PATCH v4 51/52] PCI: Introduce resource_disabled() Yinghai Lu
2015-08-21 6:21 ` [PATCH v4 52/52] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440138067-4314-8-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).