From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-io0-f171.google.com ([209.85.223.171]:33896 "EHLO mail-io0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754986AbbIKXWK (ORCPT ); Fri, 11 Sep 2015 19:22:10 -0400 From: David Daney To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring , Frank Rowand , Grant Likely , Bjorn Helgaas , linux-pci@vger.kernel.org, Will Deacon , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , linux-arm-kernel@lists.infradead.org Cc: David Daney Subject: [PATCH 5/6] PCI: generic: Pass proper starting bus number to pci_scan_root_bus(). Date: Fri, 11 Sep 2015 16:21:58 -0700 Message-Id: <1442013719-5001-6-git-send-email-ddaney.cavm@gmail.com> In-Reply-To: <1442013719-5001-1-git-send-email-ddaney.cavm@gmail.com> References: <1442013719-5001-1-git-send-email-ddaney.cavm@gmail.com> Sender: linux-pci-owner@vger.kernel.org List-ID: From: David Daney If the bus is being configured with a bus-range that does not start at zero, pass that starting bus number to pci_scan_root_bus(). Passing the incorrect value of zero causes attempted config accesses outside of the supported range, which cascades to an OOPs spew and eventual kernel panic. Signed-off-by: David Daney --- drivers/pci/host/pci-host-generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c index fce5bf7..8219c0b 100644 --- a/drivers/pci/host/pci-host-generic.c +++ b/drivers/pci/host/pci-host-generic.c @@ -265,7 +265,7 @@ static int gen_pci_probe(struct platform_device *pdev) if (!pci_has_flag(PCI_PROBE_ONLY)) pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS); - bus = pci_scan_root_bus(dev, 0, + bus = pci_scan_root_bus(dev, pci->cfg.bus_range->start, &pci->cfg.ops.ops, pci, &pci->resources); if (!bus) { dev_err(dev, "Scanning rootbus failed"); -- 1.7.11.7