From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v5 10/53] PCI: Treat ROM resource as optional during realloc
Date: Wed, 16 Sep 2015 14:57:08 -0700 [thread overview]
Message-ID: <1442440671-5361-11-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1442440671-5361-1-git-send-email-yinghai@kernel.org>
Current on realloc path, we just ignore ROM resource if we can not assign
them in first try.
Treat ROM resources as optional resources,so try to allocate them together
with required ones, if can not assign them, could go with other required
resources only, and try to allocate them second time in expand path.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 37 ++++++++++++++++++++-----------------
1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 1fd0b8d..eca319e 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -371,18 +371,10 @@ static void assign_requested_resources_sorted(struct list_head *head,
idx = res - &dev_res->dev->resource[0];
if (resource_size(res) &&
pci_assign_resource(dev_res->dev, idx)) {
- if (fail_head) {
- /*
- * if the failed res is for ROM BAR, and it will
- * be enabled later, don't add it to the list
- */
- if (!((idx == PCI_ROM_RESOURCE) &&
- (!(res->flags & IORESOURCE_ROM_ENABLE))))
- add_to_list(fail_head,
- dev_res->dev, res,
- 0 /* don't care */,
- 0 /* don't care */);
- }
+ if (fail_head)
+ add_to_list(fail_head, dev_res->dev, res,
+ 0 /* don't care */,
+ 0 /* don't care */);
reset_resource(res);
}
}
@@ -1142,6 +1134,19 @@ out:
return good_align;
}
+static inline bool is_optional(int i)
+{
+
+ if (i == PCI_ROM_RESOURCE)
+ return true;
+
+#ifdef CONFIG_PCI_IOV
+ if (i >= PCI_IOV_RESOURCES && i <= PCI_IOV_RESOURCE_END)
+ return true;
+#endif
+
+ return false;
+}
/**
* pbus_size_mem() - size the memory window of a given bus
*
@@ -1198,10 +1203,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
r_size = resource_size(r);
align = pci_resource_alignment(dev, r);
-#ifdef CONFIG_PCI_IOV
- /* put SRIOV requested res to the optional list */
- if (realloc_head && i >= PCI_IOV_RESOURCES &&
- i <= PCI_IOV_RESOURCE_END) {
+ /* put SRIOV/ROM res to realloc list */
+ if (realloc_head && is_optional(i)) {
add_to_align_test_list(&align_test_add_list,
align, r_size);
r->end = r->start - 1;
@@ -1211,7 +1214,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
max_add_align = align;
continue;
}
-#endif
+
if (align > (1ULL<<37)) { /*128 Gb*/
dev_warn(&dev->dev, "disabling BAR %d: %pR (bad alignment %#llx)\n",
i, r, (unsigned long long) align);
--
1.8.4.5
next prev parent reply other threads:[~2015-09-16 21:57 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-16 21:56 [PATCH v5 00/53] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-09-16 21:56 ` [PATCH v5 01/53] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 02/53] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 03/53] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 04/53] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 05/53] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 06/53] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 07/53] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 08/53] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 09/53] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-09-16 21:57 ` Yinghai Lu [this message]
2015-09-16 21:57 ` [PATCH v5 11/53] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 12/53] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 13/53] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 14/53] PCI: Add __add_to_list() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 15/53] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 16/53] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 17/53] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 18/53] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 19/53] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 20/53] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 21/53] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 22/53] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 23/53] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 24/53] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 25/53] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 26/53] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 27/53] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 28/53] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 29/53] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 30/53] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 31/53] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 32/53] resources: Split out __allocate_resource() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 33/53] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 34/53] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 35/53] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 36/53] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 37/53] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 38/53] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 39/53] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 40/53] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 41/53] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 42/53] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 43/53] powerpc/PCI: " Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 44/53] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 45/53] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 46/53] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 47/53] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 48/53] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 49/53] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 50/53] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 51/53] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 52/53] PCI: Introduce resource_disabled() Yinghai Lu
2015-09-16 21:57 ` [PATCH v5 53/53] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-09-17 14:55 ` [PATCH v5 00/53] PCI: Resource allocation cleanup for v4.4 Bjorn Helgaas
2015-09-17 15:38 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442440671-5361-11-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).