linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	David Miller <davem@davemloft.net>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
	Yijing Wang <wangyijing@huawei.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v6 18/53] PCI: Reorder resources list for required/optional resources
Date: Wed, 30 Sep 2015 22:52:52 -0700	[thread overview]
Message-ID: <1443678807-786-19-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1443678807-786-1-git-send-email-yinghai@kernel.org>

We try to allocate required+optional before allocate required only and
expand with optional.

At first we update size and alignment for required+optional resource.
And after that we reorder them with new alignment, but current we only
do that STARTALIGN ones.

For SIZEALIGN type resource, after add back add_size, the alignment
get changed, so need to do sorting like STARTALIGN type resources.

Also we need to reorder the sorting back after we restore
resource to required only when required+optional fail to allocate for all.

So move out the reordering code from the loop to separated function,
and call it two times accordingly.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
 drivers/pci/setup-bus.c | 62 +++++++++++++++++++++++++++++--------------------
 1 file changed, 37 insertions(+), 25 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 6fda7ad..92677c5 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -286,6 +286,31 @@ static inline void reset_resource(struct resource *res)
 	res->flags = 0;
 }
 
+static void sort_resources(struct list_head *head)
+{
+	struct pci_dev_resource *res1, *tmp_res, *res2;
+
+	list_for_each_entry_safe(res1, tmp_res, head, list) {
+		resource_size_t align1, size1, align2, size2;
+
+		align1 = pci_resource_alignment(res1->dev, res1->res);
+		size1 = resource_size(res1->res);
+
+		/* reorder it */
+		list_for_each_entry(res2, head, list) {
+			if (res2 == res1)
+				break;
+
+			align2 = pci_resource_alignment(res2->dev, res2->res);
+			size2 = resource_size(res2->res);
+			if (is_before(align1, size1, align2, size2)) {
+				list_move_tail(&res1->list, &res2->list);
+				break;
+			}
+		}
+	}
+}
+
 /**
  * reassign_resources_sorted() - satisfy any additional resource requests
  *
@@ -454,9 +479,9 @@ static void __assign_resources_sorted(struct list_head *head,
 	LIST_HEAD(save_head);
 	LIST_HEAD(local_fail_head);
 	struct pci_dev_resource *save_res;
-	struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
+	struct pci_dev_resource *dev_res, *tmp_res;
 	unsigned long fail_type;
-	resource_size_t add_align, align;
+	resource_size_t add_align;
 
 	/* Check if optional add_size is there */
 	if (!realloc_head || list_empty(realloc_head))
@@ -471,47 +496,32 @@ static void __assign_resources_sorted(struct list_head *head,
 	}
 
 	/* Update res in head list with add_size in realloc_head list */
-	list_for_each_entry_safe(dev_res, tmp_res, head, list) {
+	list_for_each_entry(dev_res, head, list) {
 		dev_res->res->end += get_res_add_size(realloc_head,
 							dev_res->res);
 
 		/*
 		 * There are two kinds of additional resources in the list:
-		 * 1. bridge resource  -- IORESOURCE_STARTALIGN
-		 * 2. SR-IOV resource   -- IORESOURCE_SIZEALIGN
-		 * Here just fix the additional alignment for bridge
+		 * 1. bridge resource with IORESOURCE_STARTALIGN
+		 *    need to update start to change alignment
+		 * 2. resource with IORESOURCE_SIZEALIGN
+		 *    update size above already change alignment.
 		 */
 		if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
 			continue;
 
 		add_align = get_res_add_align(realloc_head, dev_res->res);
 
-		/*
-		 * The "head" list is sorted by the alignment to make sure
-		 * resources with bigger alignment will be assigned first.
-		 * After we change the alignment of a dev_res in "head" list,
-		 * we need to reorder the list by alignment to make it
-		 * consistent.
-		 */
-		if (add_align > dev_res->res->start) {
+		if (add_align) {
 			resource_size_t r_size = resource_size(dev_res->res);
 
 			dev_res->res->start = add_align;
 			dev_res->res->end = add_align + r_size - 1;
-
-			list_for_each_entry(dev_res2, head, list) {
-				align = pci_resource_alignment(dev_res2->dev,
-							       dev_res2->res);
-				if (add_align > align) {
-					list_move_tail(&dev_res->list,
-						       &dev_res2->list);
-					break;
-				}
-			}
                }
-
 	}
 
+	sort_resources(head);
+
 	/* Try updated head list with add_size added */
 	assign_requested_resources_sorted(head, &local_fail_head);
 
@@ -553,6 +563,8 @@ static void __assign_resources_sorted(struct list_head *head,
 	}
 	free_list(&save_head);
 
+	sort_resources(head);
+
 requested_and_reassign:
 	/* Satisfy the must-have resource requests */
 	assign_requested_resources_sorted(head, fail_head);
-- 
1.8.4.5


  parent reply	other threads:[~2015-10-01  5:52 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-01  5:52 [PATCH v6 00/53] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 01/53] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-02 20:00   ` Khalid Aziz
2015-10-02 22:05     ` Yinghai Lu
2015-10-02 23:05       ` Khalid Aziz
2015-10-02 23:16         ` Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 02/53] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 03/53] powerpc/PCI: " Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 04/53] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 05/53] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 06/53] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 07/53] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 08/53] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 09/53] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 10/53] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 11/53] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 12/53] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 13/53] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 14/53] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 15/53] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 16/53] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 17/53] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-01  5:52 ` Yinghai Lu [this message]
2015-10-01  5:52 ` [PATCH v6 19/53] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 20/53] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 21/53] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 22/53] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 23/53] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 24/53] PCI: Add __add_to_list() Yinghai Lu
2015-10-01  5:52 ` [PATCH v6 25/53] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 26/53] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 27/53] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 28/53] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 29/53] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 30/53] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 31/53] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 32/53] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 33/53] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 34/53] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 35/53] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 36/53] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 37/53] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 38/53] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 39/53] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 40/53] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-01  8:17   ` Thomas Gleixner
2015-10-01  5:53 ` [PATCH v6 41/53] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 42/53] resources: Split out __allocate_resource() Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 43/53] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 44/53] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 45/53] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 46/53] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 47/53] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 48/53] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 49/53] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 50/53] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 51/53] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 52/53] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-01  5:53 ` [PATCH v6 53/53] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1443678807-786-19-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@iam.tj \
    --cc=wangyijing@huawei.com \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).