From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v6 24/53] PCI: Add __add_to_list()
Date: Wed, 30 Sep 2015 22:52:58 -0700 [thread overview]
Message-ID: <1443678807-786-25-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1443678807-786-1-git-send-email-yinghai@kernel.org>
For alt_size support, we will add more entries to realloc list.
Add new __add_to_list() to take alt_size, alt_align.
And simplify add_to_list() not to take add/alt input.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 51 ++++++++++++++++++++++++++++++-------------------
1 file changed, 31 insertions(+), 20 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 2c81d76..ca23b2a 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -66,6 +66,8 @@ struct pci_dev_resource {
resource_size_t end;
resource_size_t add_size;
resource_size_t min_align;
+ resource_size_t alt_size;
+ resource_size_t alt_align;
unsigned long flags;
};
@@ -88,15 +90,16 @@ static void free_list(struct list_head *head)
* @add_size: additional size to be optionally added
* to the resource
*/
-static int add_to_list(struct list_head *head,
+static int __add_to_list(struct list_head *head,
struct pci_dev *dev, struct resource *res,
- resource_size_t add_size, resource_size_t min_align)
+ resource_size_t add_size, resource_size_t min_align,
+ resource_size_t alt_size, resource_size_t alt_align)
{
struct pci_dev_resource *tmp;
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp) {
- pr_warn("add_to_list: kmalloc() failed!\n");
+ pr_warn("__add_to_list: kmalloc() failed!\n");
return -ENOMEM;
}
@@ -107,12 +110,20 @@ static int add_to_list(struct list_head *head,
tmp->flags = res->flags;
tmp->add_size = add_size;
tmp->min_align = min_align;
+ tmp->alt_size = alt_size;
+ tmp->alt_align = alt_align;
list_add(&tmp->list, head);
return 0;
}
+static int add_to_list(struct list_head *head,
+ struct pci_dev *dev, struct resource *res)
+{
+ return __add_to_list(head, dev, res, 0, 0, 0, 0);
+}
+
static void remove_from_list(struct list_head *head,
struct resource *res)
{
@@ -378,9 +389,7 @@ static void assign_requested_resources_sorted(struct list_head *head,
if (resource_size(res) &&
pci_assign_resource(dev_res->dev, idx)) {
if (fail_head)
- add_to_list(fail_head, dev_res->dev, res,
- 0 /* don't care */,
- 0 /* don't care */);
+ add_to_list(fail_head, dev_res->dev, res);
reset_resource(res);
}
}
@@ -466,7 +475,7 @@ static void __assign_resources_sorted(struct list_head *head,
/* Save original start, end, flags etc at first */
list_for_each_entry(dev_res, head, list) {
- if (add_to_list(&save_head, dev_res->dev, dev_res->res, 0, 0)) {
+ if (add_to_list(&save_head, dev_res->dev, dev_res->res)) {
free_list(&save_head);
goto requested_and_reassign;
}
@@ -1019,8 +1028,8 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
b_res->end = b_res->start + size0 - 1;
b_res->flags |= IORESOURCE_STARTALIGN;
if (size1 > size0 && realloc_head) {
- add_to_list(realloc_head, bus->self, b_res, size1-size0,
- min_align);
+ __add_to_list(realloc_head, bus->self, b_res,
+ size1 - size0, min_align, 0, 0);
dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx\n",
b_res, &bus->busn_res,
(unsigned long long)size1-size0);
@@ -1222,7 +1231,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
add_to_align_test_list(&align_test_add_list,
align, r_size);
r->end = r->start - 1;
- add_to_list(realloc_head, dev, r, r_size, 0/* don't care */);
+ __add_to_list(realloc_head, dev, r,
+ r_size, align, 0, 0);
sum_add_size += r_size;
if (align > max_add_align)
max_add_align = align;
@@ -1293,8 +1303,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
b_res->end = size0 + min_align - 1;
b_res->flags |= IORESOURCE_STARTALIGN;
if (size1 > size0 && realloc_head) {
- add_to_list(realloc_head, bus->self, b_res, size1 - size0,
- min_add_align);
+ __add_to_list(realloc_head, bus->self, b_res, size1 - size0,
+ min_add_align, 0, 0);
dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window %pR to %pR add_size %llx add_align %llx\n",
b_res, &bus->busn_res,
(unsigned long long) (size1 - size0),
@@ -1331,8 +1341,8 @@ static void pci_bus_size_cardbus(struct pci_bus *bus,
b_res[0].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[0].end -= pci_cardbus_io_size;
- add_to_list(realloc_head, bridge, b_res, pci_cardbus_io_size,
- pci_cardbus_io_size);
+ __add_to_list(realloc_head, bridge, b_res,
+ pci_cardbus_io_size, pci_cardbus_io_size, 0, 0);
}
handle_b_res_1:
@@ -1343,8 +1353,8 @@ handle_b_res_1:
b_res[1].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[1].end -= pci_cardbus_io_size;
- add_to_list(realloc_head, bridge, b_res+1, pci_cardbus_io_size,
- pci_cardbus_io_size);
+ __add_to_list(realloc_head, bridge, b_res + 1,
+ pci_cardbus_io_size, pci_cardbus_io_size, 0, 0);
}
handle_b_res_2:
@@ -1381,8 +1391,9 @@ handle_b_res_2:
IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[2].end -= pci_cardbus_mem_size;
- add_to_list(realloc_head, bridge, b_res+2,
- pci_cardbus_mem_size, pci_cardbus_mem_size);
+ __add_to_list(realloc_head, bridge, b_res + 2,
+ pci_cardbus_mem_size, pci_cardbus_mem_size,
+ 0, 0);
}
/* reduce that to half */
@@ -1397,8 +1408,8 @@ handle_b_res_3:
b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[3].end -= b_res_3_size;
- add_to_list(realloc_head, bridge, b_res+3, b_res_3_size,
- pci_cardbus_mem_size);
+ __add_to_list(realloc_head, bridge, b_res + 3,
+ b_res_3_size, pci_cardbus_mem_size, 0, 0);
}
handle_done:
--
1.8.4.5
next prev parent reply other threads:[~2015-10-01 5:52 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-01 5:52 [PATCH v6 00/53] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 01/53] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-02 20:00 ` Khalid Aziz
2015-10-02 22:05 ` Yinghai Lu
2015-10-02 23:05 ` Khalid Aziz
2015-10-02 23:16 ` Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 02/53] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 03/53] powerpc/PCI: " Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 04/53] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 05/53] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 06/53] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 07/53] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 08/53] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 09/53] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 10/53] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 11/53] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 12/53] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 13/53] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 14/53] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 15/53] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 16/53] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 17/53] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 18/53] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 19/53] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 20/53] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 21/53] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 22/53] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 23/53] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-01 5:52 ` Yinghai Lu [this message]
2015-10-01 5:52 ` [PATCH v6 25/53] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 26/53] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 27/53] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 28/53] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 29/53] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 30/53] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 31/53] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 32/53] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 33/53] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 34/53] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 35/53] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 36/53] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 37/53] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 38/53] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 39/53] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 40/53] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-01 8:17 ` Thomas Gleixner
2015-10-01 5:53 ` [PATCH v6 41/53] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 42/53] resources: Split out __allocate_resource() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 43/53] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 44/53] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 45/53] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 46/53] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 47/53] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 48/53] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 49/53] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 50/53] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 51/53] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 52/53] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 53/53] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443678807-786-25-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).