From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v6 26/53] PCI: Check if resource is allocated before trying to assign one
Date: Wed, 30 Sep 2015 22:53:00 -0700 [thread overview]
Message-ID: <1443678807-786-27-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1443678807-786-1-git-send-email-yinghai@kernel.org>
In following alt_size support, we will call pci_assign_resource() several
times on one resource list, and some resources could have been assigned
already.
Skip allocated resource in the list, as pci_assign_resource()
only can handle not assigned resource.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 4da42e5..d5c4633 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -386,7 +386,7 @@ static void assign_requested_resources_sorted(struct list_head *head,
list_for_each_entry(dev_res, head, list) {
res = dev_res->res;
idx = res - &dev_res->dev->resource[0];
- if (resource_size(res) &&
+ if (!res->parent && resource_size(res) &&
pci_assign_resource(dev_res->dev, idx)) {
if (fail_head)
add_to_list(fail_head, dev_res->dev, res);
--
1.8.4.5
next prev parent reply other threads:[~2015-10-01 5:53 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-01 5:52 [PATCH v6 00/53] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 01/53] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-02 20:00 ` Khalid Aziz
2015-10-02 22:05 ` Yinghai Lu
2015-10-02 23:05 ` Khalid Aziz
2015-10-02 23:16 ` Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 02/53] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 03/53] powerpc/PCI: " Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 04/53] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 05/53] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 06/53] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 07/53] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 08/53] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 09/53] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 10/53] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 11/53] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 12/53] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 13/53] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 14/53] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 15/53] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 16/53] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 17/53] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 18/53] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 19/53] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 20/53] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 21/53] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 22/53] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 23/53] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 24/53] PCI: Add __add_to_list() Yinghai Lu
2015-10-01 5:52 ` [PATCH v6 25/53] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-01 5:53 ` Yinghai Lu [this message]
2015-10-01 5:53 ` [PATCH v6 27/53] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 28/53] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 29/53] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 30/53] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 31/53] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 32/53] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 33/53] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 34/53] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 35/53] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 36/53] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 37/53] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 38/53] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 39/53] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 40/53] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-01 8:17 ` Thomas Gleixner
2015-10-01 5:53 ` [PATCH v6 41/53] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 42/53] resources: Split out __allocate_resource() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 43/53] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 44/53] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 45/53] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 46/53] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 47/53] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 48/53] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 49/53] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 50/53] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 51/53] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 52/53] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-01 5:53 ` [PATCH v6 53/53] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443678807-786-27-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).