From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v7 00/60] PCI: Resource allocation cleanup for v4.4
Date: Thu, 8 Oct 2015 14:38:19 -0700 [thread overview]
Message-ID: <1444340359-8011-1-git-send-email-yinghai@kernel.org> (raw)
Hi,
After 5b28541552ef (PCI: Restrict 64-bit prefetchable bridge windows
to 64-bit resources), we have several reports on resource allocation
failure, and we try to fix the problem with resource clip, and find
more problems.
One is realloc fail with two graphics cards above 4G.
One is from sparc that have problem with clip as we don't parse
mem64 for it.
Other report is about pci remove/rescan does not work on some setup
when BIOS tend to allocate small bus size.
This patchset enhance resource allocation to address those problems.
patch 1-10: parse MEM64 for sparc and other system with OF
patch 11-15: MMIO64 allocation enhancement
treat non-pref mmio64 if parent bridges are all pcie.
restore old pref allocation logic if hostbridge does not support mmio64.
patch 16-18: FIXED resource handling during realloc
don't realloc resource if device firmware does not support bar change.
patch 19-22: bridge MMIO allocation with hotplug and last try.
treat optional as required on first try when hotplug.
MMIO size set to 0 for last try during realloc
patch 22-56: enhancement for mmio resource allocation:
optimize bus mmio alignment calculation.
optimize bus mmio optional alignment calculation.
add support for alt size to prefer small bus size to small bus alignment.
treat ROM bar as optional resource.
during allocation, will pick up best fit resource, and allocate near end.
patch 57: add pci=assign_pref_bars to clear and assign pref bars.
patch 58-59: don't clear resource when allocation fails
patch 60: don't try io port allocation if root bus does not have io port.
I put latest copy at:
git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-v4.4-next
That is based on v4.3-rc4+.
Yijing and Wei Yang both tested the branch, and the patchset fixs rescan
problem, and is working well on powerpc setup.
Khalid Aziz tested on some sparc platforms that have different offset to
mem space start or support 64bit mmio.
Thanks
Yinghai
v2:
- fix resource_disabled allocation from powerpc
- other warnings that were found by Fengguang's build robot.
- io port alignment clean up.
- rebased to v4.2-rc2
- better for two alt_size support.
v3:
- fix reset bridge resource on last try: only with bridge resources
- remove/rescan path checking with old_size.
v4:
- Update changelog according to Bjorn.
- split calculate_size patch to two.
- use required instead of must.
v5:
- update changelog
- add one debug patch
- add one patch that get resource allocation near end of avialable window
v6:
- reorder patches according to Bjorn.
v7:
- add some patches that fix problems on sparc that Khalid Aziz found.
Yinghai Lu (60):
sparc/PCI: Add mem64 resource parsing for root bus
sparc/PCI: Use correct bus address to resource offset
sparc/PCI: Unify pci_register_region()
sparc/PCI: Reserve legacy mmio after PCI mmio
sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing
sparc/PCI: Keep resource idx order with bridge register number
PCI: kill wrong quirk about M7101
powerpc/PCI: Keep resource idx order with bridge register number
powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing
OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource
PCI: Check pref compatible bit for mem64 resource of PCIe device
PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64
PCI: Add has_mem64 for struct host_bridge
PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64
PCI: Restore pref MMIO allocation logic for host bridge without mmio64
PCI: Don't release fixed resource for realloc
PCI: Claim fixed resource during remove/rescan path
PCI: Set resource to FIXED for LSI devices
PCI: Separate realloc list checking after allocation
PCI: Treat optional as required in first try for bridge rescan
PCI: Get new realloc size for bridge for last try
PCI: Don't release sibling bridge resources during hotplug
PCI: Cleanup res_to_dev_res() printout
PCI: Reuse res_to_dev_res() in reassign_resources_sorted()
PCI: Use correct align for optional only resources during sorting
PCI: Optimize bus min_align/size calculation during sizing
PCI: Optimize bus align/size calculation for optional during sizing
PCI: Don't add too much optional size for hotplug bridge MMIO
PCI: Reorder resources list for required/optional resources
PCI: Remove duplicated code for resource sorting
PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare()
PCI: Treat ROM resource as optional during realloc
PCI: Add debug printout during releasing partial assigned resources
PCI: Simplify res reference using in __assign_resources_sorted()
PCI: Add __add_to_list()
PCI: Cache window alignment value during bus sizing
PCI: Check if resource is allocated before trying to assign one
PCI: Separate out save_resources()/restore_resources()
PCI: Move comment to pci_need_to_release()
PCI: Separate required+optional assigning to another function
PCI: Skip required+optional if there is no optional
PCI: Move saved required resource list out of required+optional assigning
PCI: Add alt_size ressource allocation support
PCI: Add support for more than two alt_size entries under same bridge
PCI: Fix size calculation with old_size on rescan path
PCI: Don't add too much optional size for hotplug bridge io
PCI: Move ISA io port align out of calculate_iosize()
PCI: Don't add too much io port for hotplug bridge with old size
PCI: Unify calculate_size() for io port and MMIO
PCI: Allow bridge optional only io port resource required size to be 0
PCI: Unify skip_ioresource_align()
PCI: Kill macro checking for bus io port sizing
resources: Split out __allocate_resource()
resources: Make allocate_resource() return best fit resource
PCI, x86: Allocate from high in available window for MMIO
PCI: Add debug print out for min_align and alt_size
PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs
PCI: Introduce resource_disabled()
PCI: Don't set flags to 0 when assign resource fail
PCI: Only try to assign io port only for root bus that support it
arch/alpha/kernel/pci.c | 2 +-
arch/ia64/pci/pci.c | 4 +-
arch/microblaze/pci/pci-common.c | 23 +-
arch/mn10300/unit-asb2305/pci-asb2305.c | 4 +-
arch/mn10300/unit-asb2305/pci.c | 4 +-
arch/powerpc/kernel/pci-common.c | 27 +-
arch/powerpc/kernel/pci_of_scan.c | 12 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 12 +-
arch/s390/pci/pci.c | 2 +-
arch/sparc/kernel/of_device_32.c | 5 +-
arch/sparc/kernel/of_device_64.c | 5 +-
arch/sparc/kernel/pci.c | 30 +-
arch/sparc/kernel/pci_common.c | 125 +--
arch/sparc/kernel/pci_impl.h | 5 +
arch/x86/include/asm/pci_x86.h | 2 +-
arch/x86/pci/common.c | 7 +-
arch/x86/pci/i386.c | 86 +-
arch/xtensa/kernel/pci.c | 4 +-
drivers/iommu/intel-iommu.c | 3 +-
drivers/of/address.c | 4 +-
drivers/pci/bus.c | 6 +-
drivers/pci/host/pcie-rcar.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 1 +
drivers/pci/iov.c | 2 +-
drivers/pci/pci.c | 3 +-
drivers/pci/pci.h | 4 +
drivers/pci/probe.c | 48 +-
drivers/pci/quirks.c | 55 +-
drivers/pci/rom.c | 2 +-
drivers/pci/setup-bus.c | 1312 +++++++++++++++++++++--------
drivers/pci/setup-res.c | 18 +-
include/asm-generic/pci-bridge.h | 2 +
include/linux/ioport.h | 6 +-
include/linux/pci.h | 6 +
kernel/resource.c | 175 +++-
35 files changed, 1461 insertions(+), 547 deletions(-)
--
1.8.4.5
next reply other threads:[~2015-10-08 21:38 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-08 21:38 Yinghai Lu [this message]
2015-10-08 21:38 ` [PATCH v7 01/60] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-09 16:15 ` Khalid Aziz
2015-10-20 16:42 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 02/60] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-10-09 16:16 ` Khalid Aziz
2015-10-20 16:45 ` Bjorn Helgaas
2015-10-20 19:54 ` Bjorn Helgaas
2015-10-20 20:07 ` Khalid Aziz
2015-10-20 20:34 ` Yinghai Lu
2015-10-20 20:49 ` Khalid Aziz
2015-10-20 23:51 ` Khalid Aziz
2015-10-21 0:03 ` Yinghai Lu
2015-10-21 0:25 ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 03/60] sparc/PCI: Unify pci_register_region() Yinghai Lu
2015-10-09 16:16 ` Khalid Aziz
2015-10-20 21:57 ` Bjorn Helgaas
2015-10-20 22:16 ` Yinghai Lu
2015-10-20 22:30 ` Yinghai Lu
2015-10-21 2:35 ` Bjorn Helgaas
2015-10-21 18:16 ` Yinghai Lu
2015-10-21 18:50 ` Bjorn Helgaas
2015-10-21 22:32 ` Yinghai Lu
2015-10-21 22:59 ` Yinghai Lu
2015-10-22 1:15 ` Yinghai Lu
2015-10-22 19:56 ` Yinghai Lu
2015-10-22 21:43 ` Yinghai Lu
2015-10-22 1:27 ` David Miller
2015-10-22 3:47 ` Benjamin Herrenschmidt
2015-10-23 5:38 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 04/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 05/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 06/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 07/60] PCI: kill wrong quirk about M7101 Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-12 19:46 ` Meelis Roos
2015-10-12 22:41 ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 08/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 09/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 10/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 11/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 12/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 13/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 14/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 15/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-09 16:22 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 16/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 17/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 18/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 19/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 20/60] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 21/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 22/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 23/60] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 24/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 25/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 26/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 27/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 28/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 29/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 30/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 31/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 32/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 33/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 34/60] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 35/60] PCI: Add __add_to_list() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 36/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 37/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 38/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 39/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 40/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 41/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 42/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 43/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 44/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 45/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 46/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 47/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 48/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 49/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 50/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 51/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-13 9:45 ` [v7,51/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 52/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 53/60] resources: Split out __allocate_resource() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-13 9:48 ` [v7,58/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 59/60] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444340359-8011-1-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).