From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v7 11/60] PCI: Check pref compatible bit for mem64 resource of PCIe device
Date: Thu, 8 Oct 2015 14:38:30 -0700 [thread overview]
Message-ID: <1444340359-8011-12-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1444340359-8011-1-git-send-email-yinghai@kernel.org>
We still get "no compatible bridge window" warning on sparc T5-8
after we add support for 64bit resource parsing for root bus.
PCI: scan_bus[/pci@300/pci@1/pci@0/pci@6] bus no 8
PCI: Claiming 0000:00:01.0: Resource 15: 0000800100000000..00008004afffffff [220c]
PCI: Claiming 0000:01:00.0: Resource 15: 0000800100000000..00008004afffffff [220c]
PCI: Claiming 0000:02:04.0: Resource 15: 0000800100000000..000080012fffffff [220c]
PCI: Claiming 0000:03:00.0: Resource 15: 0000800100000000..000080012fffffff [220c]
PCI: Claiming 0000:04:06.0: Resource 14: 0000800100000000..000080010fffffff [220c]
PCI: Claiming 0000:05:00.0: Resource 0: 0000800100000000..0000800100001fff [204]
pci 0000:05:00.0: can't claim BAR 0 [mem 0x800100000000-0x800100001fff]: no compatible bridge window
All the bridges 64-bit resource have pref bit, but the device resource does not
have pref set, then we can not find parent for the device resource,
as we can not put non-pref mem under pref mem.
According to pcie spec errta
https://www.pcisig.com/specifications/pciexpress/base2/PCIe_Base_r2.1_Errata_08Jun10.pdf
page 13, in some case it is ok to mark some as pref.
Mark if the entire path from the host to the adapter is over PCI Express.
Then set pref compatible bit for claim/sizing/assign for 64bit mem resource
on that pcie device.
-v2: set pref for mmio 64 when whole path is PCI Express, according to David Miller.
-v3: don't set pref directly, change to UNDER_PREF, and set PREF before
sizing and assign resource, and cleart PREF afterwards. requested by BenH.
-v4: use on_all_pcie_path device flag instead.
Fixes: commit d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows")
Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com
Reported-by: David Ahern <david.ahern@oracle.com>
Tested-by: David Ahern <david.ahern@oracle.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81431
Tested-by: TJ <linux@iam.tj>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/pci.c | 3 ++-
drivers/pci/pci.h | 2 ++
drivers/pci/probe.c | 33 +++++++++++++++++++++++++++++++++
drivers/pci/setup-bus.c | 21 ++++++++++++++++++---
drivers/pci/setup-res.c | 4 ++++
include/linux/pci.h | 1 +
6 files changed, 60 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6a9a111..f951cfb 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -425,6 +425,7 @@ EXPORT_SYMBOL_GPL(pci_find_ht_capability);
struct resource *pci_find_parent_resource(const struct pci_dev *dev,
struct resource *res)
{
+ int flags = pci_resource_pref_compatible(dev, res);
const struct pci_bus *bus = dev->bus;
struct resource *r;
int i;
@@ -439,7 +440,7 @@ struct resource *pci_find_parent_resource(const struct pci_dev *dev,
* not, the allocator made a mistake.
*/
if (r->flags & IORESOURCE_PREFETCH &&
- !(res->flags & IORESOURCE_PREFETCH))
+ !(flags & IORESOURCE_PREFETCH))
return NULL;
/*
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 24ba9dc..6ad0f05 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -337,4 +337,6 @@ static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe)
struct pci_host_bridge *pci_find_host_bridge(struct pci_bus *bus);
+int pci_resource_pref_compatible(const struct pci_dev *dev,
+ struct resource *res);
#endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8361d27..2c69441 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1633,6 +1633,36 @@ static void pci_set_msi_domain(struct pci_dev *dev)
dev_get_msi_domain(&dev->bus->dev));
}
+static bool pci_up_path_over_pcie(struct pci_bus *bus)
+{
+ if (pci_is_root_bus(bus))
+ return true;
+
+ if (bus->self && !pci_is_pcie(bus->self))
+ return false;
+
+ return pci_up_path_over_pcie(bus->parent);
+}
+
+/*
+ * According to
+ * https://www.pcisig.com/specifications/pciexpress/base2/PCIe_Base_r2.1_Errata_08Jun10.pdf
+ * page 13, system firmware could put some 64bit non-pref under 64bit pref,
+ * on some cases.
+ * Let's mark if entire path from the host to the adapter is over PCI
+ * Express. later will use that compute pref compaitable bit.
+ */
+static void pci_set_on_all_pcie_path(struct pci_dev *dev)
+{
+ if (!pci_is_pcie(dev))
+ return;
+
+ if (!pci_up_path_over_pcie(dev->bus))
+ return;
+
+ dev->on_all_pcie_path = 1;
+}
+
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
int ret;
@@ -1663,6 +1693,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
/* Initialize various capabilities */
pci_init_capabilities(dev);
+ /* After pcie_cap is assigned */
+ pci_set_on_all_pcie_path(dev);
+
/*
* Add the device to our list of discovered devices
* and the bus list for fixup functions, etc.
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 508cc56..6c43c43 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -739,6 +739,20 @@ int pci_claim_bridge_resource(struct pci_dev *bridge, int i)
return -EINVAL;
}
+int pci_resource_pref_compatible(const struct pci_dev *dev,
+ struct resource *res)
+{
+ if (res->flags & IORESOURCE_PREFETCH)
+ return res->flags;
+
+ if ((res->flags & IORESOURCE_MEM) &&
+ (res->flags & IORESOURCE_MEM_64) &&
+ dev->on_all_pcie_path)
+ return res->flags | IORESOURCE_PREFETCH;
+
+ return res->flags;
+}
+
/* Check whether the bridge supports optional I/O and
prefetchable memory ranges. If not, the respective
base/limit registers must be read-only and read as 0. */
@@ -1036,10 +1050,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
resource_size_t r_size;
+ int flags = pci_resource_pref_compatible(dev, r);
- if (r->parent || ((r->flags & mask) != type &&
- (r->flags & mask) != type2 &&
- (r->flags & mask) != type3))
+ if (r->parent || ((flags & mask) != type &&
+ (flags & mask) != type2 &&
+ (flags & mask) != type3))
continue;
r_size = resource_size(r);
#ifdef CONFIG_PCI_IOV
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 232f925..b19aa5b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -250,15 +250,19 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
static int _pci_assign_resource(struct pci_dev *dev, int resno,
resource_size_t size, resource_size_t min_align)
{
+ struct resource *res = dev->resource + resno;
+ int old_flags = res->flags;
struct pci_bus *bus;
int ret;
+ res->flags = pci_resource_pref_compatible(dev, res);
bus = dev->bus;
while ((ret = __pci_assign_resource(bus, dev, resno, size, min_align))) {
if (!bus->parent || !bus->self->transparent)
break;
bus = bus->parent;
}
+ res->flags = old_flags;
return ret;
}
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e90eb22..42a267a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -311,6 +311,7 @@ struct pci_dev {
powered on/off by the
corresponding bridge */
unsigned int ignore_hotplug:1; /* Ignore hotplug events */
+ unsigned int on_all_pcie_path:1; /* up to host-bridge all pcie */
unsigned int d3_delay; /* D3->D0 transition time in ms */
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
--
1.8.4.5
next prev parent reply other threads:[~2015-10-08 21:38 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-08 21:38 [PATCH v7 00/60] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 01/60] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-09 16:15 ` Khalid Aziz
2015-10-20 16:42 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 02/60] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-10-09 16:16 ` Khalid Aziz
2015-10-20 16:45 ` Bjorn Helgaas
2015-10-20 19:54 ` Bjorn Helgaas
2015-10-20 20:07 ` Khalid Aziz
2015-10-20 20:34 ` Yinghai Lu
2015-10-20 20:49 ` Khalid Aziz
2015-10-20 23:51 ` Khalid Aziz
2015-10-21 0:03 ` Yinghai Lu
2015-10-21 0:25 ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 03/60] sparc/PCI: Unify pci_register_region() Yinghai Lu
2015-10-09 16:16 ` Khalid Aziz
2015-10-20 21:57 ` Bjorn Helgaas
2015-10-20 22:16 ` Yinghai Lu
2015-10-20 22:30 ` Yinghai Lu
2015-10-21 2:35 ` Bjorn Helgaas
2015-10-21 18:16 ` Yinghai Lu
2015-10-21 18:50 ` Bjorn Helgaas
2015-10-21 22:32 ` Yinghai Lu
2015-10-21 22:59 ` Yinghai Lu
2015-10-22 1:15 ` Yinghai Lu
2015-10-22 19:56 ` Yinghai Lu
2015-10-22 21:43 ` Yinghai Lu
2015-10-22 1:27 ` David Miller
2015-10-22 3:47 ` Benjamin Herrenschmidt
2015-10-23 5:38 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 04/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 05/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 06/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 07/60] PCI: kill wrong quirk about M7101 Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-12 19:46 ` Meelis Roos
2015-10-12 22:41 ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 08/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 09/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 10/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-08 21:38 ` Yinghai Lu [this message]
2015-10-09 16:20 ` [PATCH v7 11/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 12/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 13/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 14/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 15/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-09 16:22 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 16/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 17/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 18/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 19/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 20/60] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 21/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 22/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 23/60] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 24/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 25/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 26/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 27/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 28/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 29/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 30/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 31/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 32/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 33/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 34/60] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 35/60] PCI: Add __add_to_list() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 36/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 37/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 38/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 39/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 40/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 41/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 42/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 43/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 44/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 45/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 46/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 47/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 48/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 49/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 50/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 51/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-13 9:45 ` [v7,51/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 52/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 53/60] resources: Split out __allocate_resource() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-13 9:48 ` [v7,58/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 59/60] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444340359-8011-12-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).