From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v7 20/60] PCI: Treat optional as required in first try for bridge rescan
Date: Thu, 8 Oct 2015 14:38:39 -0700 [thread overview]
Message-ID: <1444340359-8011-21-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1444340359-8011-1-git-send-email-yinghai@kernel.org>
For rescan bridge/bus that children are removed before, we should treat
optional as required just like root bus the boot time in 19aa7ee432ce
(PCI: make re-allocation try harder by reassigning ranges higher in
the heirarchy).
The reason: allocate required and expand to optional path do not
put failed resource to fail list, so will lose required info before
next try.
So we are using following way:
1. First and following try before last try:
We don't keep realloc list so treat every optional as required.
allocate for required+optional and put failed in the fail list.
then size info (include must and optonal separatedly) will be kept
for next try.
2. last try:
a: try to allocate required+optional to see if all get allocated.
b: try to allocate required then expand to optional.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 53ab81f..5505942 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1802,25 +1802,34 @@ void __init pci_assign_unassigned_resources(void)
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
- LIST_HEAD(add_list); /* list of resources that
+ LIST_HEAD(realloc_head); /* list of resources that
want additional resources */
+ struct list_head *add_list = NULL;
int tried_times = 0;
LIST_HEAD(fail_head);
struct pci_dev_resource *fail_res;
int retval;
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH | IORESOURCE_MEM_64;
+ int pci_try_num = 2;
again:
- __pci_bus_size_bridges(parent, &add_list);
- __pci_bridge_assign_resources(bridge, &add_list, &fail_head);
- pci_bus_check_realloc(&add_list);
+ /*
+ * last try will use add_list, otherwise will try good to have as
+ * must have, so can realloc parent bridge resource
+ */
+ if (tried_times + 1 == pci_try_num)
+ add_list = &realloc_head;
+ __pci_bus_size_bridges(parent, add_list);
+ __pci_bridge_assign_resources(bridge, add_list, &fail_head);
+ if (add_list)
+ pci_bus_check_realloc(add_list);
tried_times++;
if (list_empty(&fail_head))
goto enable_all;
- if (tried_times >= 2) {
+ if (tried_times >= pci_try_num) {
/* still fail, don't need to try more */
free_list(&fail_head);
goto enable_all;
--
1.8.4.5
next prev parent reply other threads:[~2015-10-08 21:38 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-08 21:38 [PATCH v7 00/60] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 01/60] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-09 16:15 ` Khalid Aziz
2015-10-20 16:42 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 02/60] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-10-09 16:16 ` Khalid Aziz
2015-10-20 16:45 ` Bjorn Helgaas
2015-10-20 19:54 ` Bjorn Helgaas
2015-10-20 20:07 ` Khalid Aziz
2015-10-20 20:34 ` Yinghai Lu
2015-10-20 20:49 ` Khalid Aziz
2015-10-20 23:51 ` Khalid Aziz
2015-10-21 0:03 ` Yinghai Lu
2015-10-21 0:25 ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 03/60] sparc/PCI: Unify pci_register_region() Yinghai Lu
2015-10-09 16:16 ` Khalid Aziz
2015-10-20 21:57 ` Bjorn Helgaas
2015-10-20 22:16 ` Yinghai Lu
2015-10-20 22:30 ` Yinghai Lu
2015-10-21 2:35 ` Bjorn Helgaas
2015-10-21 18:16 ` Yinghai Lu
2015-10-21 18:50 ` Bjorn Helgaas
2015-10-21 22:32 ` Yinghai Lu
2015-10-21 22:59 ` Yinghai Lu
2015-10-22 1:15 ` Yinghai Lu
2015-10-22 19:56 ` Yinghai Lu
2015-10-22 21:43 ` Yinghai Lu
2015-10-22 1:27 ` David Miller
2015-10-22 3:47 ` Benjamin Herrenschmidt
2015-10-23 5:38 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 04/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 05/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 06/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 07/60] PCI: kill wrong quirk about M7101 Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-12 19:46 ` Meelis Roos
2015-10-12 22:41 ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 08/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 09/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 10/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 11/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 12/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 13/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 14/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 15/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-09 16:22 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 16/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 17/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 18/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 19/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-08 21:38 ` Yinghai Lu [this message]
2015-10-08 21:38 ` [PATCH v7 21/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 22/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 23/60] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 24/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 25/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 26/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 27/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 28/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 29/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 30/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 31/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 32/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 33/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 34/60] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 35/60] PCI: Add __add_to_list() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 36/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 37/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 38/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 39/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 40/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 41/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 42/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 43/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 44/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 45/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 46/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 47/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 48/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 49/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 50/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 51/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-13 9:45 ` [v7,51/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 52/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 53/60] resources: Split out __allocate_resource() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-13 9:48 ` [v7,58/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 59/60] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444340359-8011-21-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).