From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v7 59/60] PCI: Don't set flags to 0 when assign resource fail
Date: Thu, 8 Oct 2015 14:39:18 -0700 [thread overview]
Message-ID: <1444340359-8011-60-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1444340359-8011-1-git-send-email-yinghai@kernel.org>
We want to keep resource flags instead of clearing it after resource
allocation fails.
Make flags take IORESOURCE_UNSET | IORESOURCE_DISABLED instead.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/bus.c | 2 +-
drivers/pci/setup-bus.c | 45 +++++++++++++++++++++++----------------------
drivers/pci/setup-res.c | 3 ++-
3 files changed, 26 insertions(+), 24 deletions(-)
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 0859e77..69f1b5e 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -140,7 +140,7 @@ static int pci_bus_alloc_from_region(struct pci_bus *bus, struct resource *res,
type_mask |= IORESOURCE_TYPE_BITS;
pci_bus_for_each_resource(bus, r, i) {
- if (!r)
+ if (!r || resource_disabled(r))
continue;
/* type_mask must match */
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 23318bd..22ee1a1 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -264,13 +264,6 @@ static void __dev_assign_resources_prepare(struct pci_dev *dev,
pdev_assign_resources_prepare(dev, realloc_head, head);
}
-static inline void reset_resource(struct resource *res)
-{
- res->start = 0;
- res->end = 0;
- res->flags = 0;
-}
-
static void sort_resources(struct list_head *head)
{
struct pci_dev_resource *res1, *tmp_res, *res2;
@@ -337,7 +330,7 @@ static void reassign_resources_sorted(struct list_head *realloc_head,
res->start = align;
res->end = res->start + add_size - 1;
if (pci_assign_resource(add_res->dev, idx))
- reset_resource(res);
+ res->flags |= IORESOURCE_DISABLED;
} else {
/* could just assigned with alt, add difference ? */
resource_size_t size;
@@ -391,7 +384,7 @@ static void assign_requested_resources_sorted(struct list_head *head,
pci_assign_resource(dev_res->dev, idx)) {
if (fail_head)
add_to_list(fail_head, dev_res->dev, res);
- reset_resource(res);
+ res->flags |= IORESOURCE_DISABLED;
}
}
}
@@ -677,7 +670,7 @@ static void __assign_resources_alt_sorted(struct list_head *head,
if (!res_to_dev_res(local_fail_head, res))
add_to_list(local_fail_head, fail_res->dev, res);
- reset_resource(res);
+ res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
}
free_list(&local_alt_fail_head);
}
@@ -843,7 +836,7 @@ static void pci_setup_bridge_io(struct pci_dev *bridge)
/* Set up the top and bottom of the PCI I/O segment for this bus. */
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
- if (res->flags & IORESOURCE_IO) {
+ if ((res->flags & IORESOURCE_IO) && !(res->flags & IORESOURCE_UNSET)) {
pci_read_config_word(bridge, PCI_IO_BASE, &l);
io_base_lo = (region.start >> 8) & io_mask;
io_limit_lo = (region.end >> 8) & io_mask;
@@ -873,7 +866,8 @@ static void pci_setup_bridge_mmio(struct pci_dev *bridge)
/* Set up the top and bottom of the PCI Memory segment for this bus. */
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
- if (res->flags & IORESOURCE_MEM) {
+ if ((res->flags & IORESOURCE_MEM) &&
+ !(res->flags & IORESOURCE_UNSET)) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
dev_info(&bridge->dev, " bridge window %pR\n", res);
@@ -898,7 +892,8 @@ static void pci_setup_bridge_mmio_pref(struct pci_dev *bridge)
bu = lu = 0;
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
- if (res->flags & IORESOURCE_PREFETCH) {
+ if ((res->flags & IORESOURCE_PREFETCH) &&
+ !(res->flags & IORESOURCE_UNSET)) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
if (res->flags & IORESOURCE_MEM_64) {
@@ -1028,6 +1023,7 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
b_res[1].flags |= IORESOURCE_MEM;
+ b_res[1].flags &= ~IORESOURCE_DISABLED;
pci_read_config_word(bridge, PCI_IO_BASE, &io);
if (!io) {
@@ -1035,8 +1031,10 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
pci_read_config_word(bridge, PCI_IO_BASE, &io);
pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
}
- if (io)
+ if (io) {
b_res[0].flags |= IORESOURCE_IO;
+ b_res[0].flags &= ~IORESOURCE_DISABLED;
+ }
/* DECchip 21050 pass 2 errata: the bridge may miss an address
disconnect boundary by one PCI data phase.
@@ -1053,6 +1051,7 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
}
if (pmem) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ b_res[2].flags &= ~IORESOURCE_DISABLED;
if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
PCI_PREF_RANGE_TYPE_64) {
b_res[2].flags |= IORESOURCE_MEM_64;
@@ -1198,8 +1197,10 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
struct resource *r = &dev->resource[i];
unsigned long r_size, r_add_size;
- if (r->parent || !(r->flags & IORESOURCE_IO))
+ if (r->parent || !(r->flags & IORESOURCE_IO) ||
+ resource_disabled(r))
continue;
+
r_size = resource_size(r);
if (r_size < 0x400)
@@ -1240,7 +1241,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
b_res, &bus->busn_res);
- b_res->flags = 0;
+ b_res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
return;
}
@@ -1532,7 +1533,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (r->parent || ((flags & mask) != type &&
(flags & mask) != type2 &&
- (flags & mask) != type3))
+ (flags & mask) != type3) ||
+ resource_disabled(r))
continue;
r_size = resource_size(r);
@@ -1553,7 +1555,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (align > (1ULL<<37)) { /*128 Gb*/
dev_warn(&dev->dev, "disabling BAR %d: %pR (bad alignment %#llx)\n",
i, r, (unsigned long long) align);
- r->flags = 0;
+ r->flags |= IORESOURCE_UNSET |
+ IORESOURCE_DISABLED;
continue;
}
@@ -1650,7 +1653,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
b_res, &bus->busn_res);
- b_res->flags = 0;
+ b_res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
return 0;
}
@@ -2067,7 +2070,7 @@ static void pci_bridge_release_resources(struct pci_bus *bus,
/* keep the old size */
r->end = resource_size(r) - 1;
r->start = 0;
- r->flags = 0;
+ r->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
/* avoiding touch the one without PREF */
if (type & IORESOURCE_PREFETCH)
@@ -2336,7 +2339,6 @@ again:
restore_resource(fail_res, res);
if (fail_res->dev->subordinate) {
- res->flags = 0;
/* last or third times and later */
if (tried_times + 1 == pci_try_num ||
tried_times + 1 > 2)
@@ -2420,7 +2422,6 @@ again:
restore_resource(fail_res, res);
if (fail_res->dev->subordinate) {
- res->flags = 0;
/* last time */
reset_bridge_resource_size(fail_res->dev, res);
}
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 55caf7a..d17f23c 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -364,7 +364,8 @@ int pci_enable_resources(struct pci_dev *dev, int mask)
r = &dev->resource[i];
- if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ||
+ resource_disabled(r))
continue;
if ((i == PCI_ROM_RESOURCE) &&
(!(r->flags & IORESOURCE_ROM_ENABLE)))
--
1.8.4.5
next prev parent reply other threads:[~2015-10-08 21:40 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-08 21:38 [PATCH v7 00/60] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 01/60] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-09 16:15 ` Khalid Aziz
2015-10-20 16:42 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 02/60] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-10-09 16:16 ` Khalid Aziz
2015-10-20 16:45 ` Bjorn Helgaas
2015-10-20 19:54 ` Bjorn Helgaas
2015-10-20 20:07 ` Khalid Aziz
2015-10-20 20:34 ` Yinghai Lu
2015-10-20 20:49 ` Khalid Aziz
2015-10-20 23:51 ` Khalid Aziz
2015-10-21 0:03 ` Yinghai Lu
2015-10-21 0:25 ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 03/60] sparc/PCI: Unify pci_register_region() Yinghai Lu
2015-10-09 16:16 ` Khalid Aziz
2015-10-20 21:57 ` Bjorn Helgaas
2015-10-20 22:16 ` Yinghai Lu
2015-10-20 22:30 ` Yinghai Lu
2015-10-21 2:35 ` Bjorn Helgaas
2015-10-21 18:16 ` Yinghai Lu
2015-10-21 18:50 ` Bjorn Helgaas
2015-10-21 22:32 ` Yinghai Lu
2015-10-21 22:59 ` Yinghai Lu
2015-10-22 1:15 ` Yinghai Lu
2015-10-22 19:56 ` Yinghai Lu
2015-10-22 21:43 ` Yinghai Lu
2015-10-22 1:27 ` David Miller
2015-10-22 3:47 ` Benjamin Herrenschmidt
2015-10-23 5:38 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 04/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 05/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 06/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-09 16:19 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 07/60] PCI: kill wrong quirk about M7101 Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-12 19:46 ` Meelis Roos
2015-10-12 22:41 ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 08/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 09/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 10/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 11/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-09 16:20 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 12/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 13/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 14/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-09 16:21 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 15/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-09 16:22 ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 16/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 17/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 18/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 19/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 20/60] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 21/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 22/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 23/60] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 24/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 25/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 26/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 27/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 28/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 29/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 30/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 31/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 32/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 33/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 34/60] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 35/60] PCI: Add __add_to_list() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 36/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 37/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 38/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 39/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 40/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 41/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 42/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 43/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 44/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 45/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 46/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 47/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 48/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 49/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 50/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 51/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-13 9:45 ` [v7,51/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 52/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 53/60] resources: Split out __allocate_resource() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-13 9:48 ` [v7,58/60] " Michael Ellerman
2015-10-08 21:39 ` Yinghai Lu [this message]
2015-10-08 21:39 ` [PATCH v7 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444340359-8011-60-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).