[PATCH v8 19/61] PCI: Set resource to FIXED for LSI devices

[Yinghai Lu <yinghai@kernel.org>]

LSI HBA firmware stop responding pci read from host if pci core ever change
pci device BAR values.

Set their resources to FIXED, so will allow realloc to skip them.

Reported-by: Paul Johnson <pjay@nwtrail.com>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=92351
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@vger.kernel.org
---
 drivers/pci/pci.h       |  1 +
 drivers/pci/quirks.c    | 20 ++++++++++++++++++++
 drivers/pci/setup-bus.c |  4 ++++
 3 files changed, 25 insertions(+)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 6ad0f05..39d2c50 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -170,6 +170,7 @@ static inline void pci_msix_clear_and_set_ctrl(struct pci_dev *dev, u16 clear, u
 }
 
 void pci_realloc_get_opt(char *);
+bool pci_realloc_user_enabled(void);
 
 static inline int pci_no_d1d2(struct pci_dev *dev)
 {
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1d85f37..be0bdfb 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -323,6 +323,26 @@ static void quirk_s3_64M(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_868,		quirk_s3_64M);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_968,		quirk_s3_64M);
 
+/*
+ * LSI devices firmware does not like BAR get changed
+ */
+static void quirk_bar_fixed(struct pci_dev *dev)
+{
+	int i;
+
+	if (pci_realloc_user_enabled())
+		return;
+
+	for (i = 0; i < PCI_STD_RESOURCE_END; i++) {
+		struct resource *r = &dev->resource[i];
+
+		if (!r->start || !r->flags)
+			continue;
+		r->flags |= IORESOURCE_PCI_FIXED;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC,	PCI_ANY_ID,	quirk_bar_fixed);
+
 /* for pci remove and rescan */
 static void quirk_allocate_fixed(struct pci_dev *dev)
 {
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8cd6c6b..d49c6e5 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1634,6 +1634,10 @@ void __init pci_realloc_get_opt(char *str)
 	else if (!strncmp(str, "on", 2))
 		pci_realloc_enable = user_enabled;
 }
+bool pci_realloc_user_enabled(void)
+{
+	return pci_realloc_enable == user_enabled;
+}
 static bool pci_realloc_enabled(enum enable_type enable)
 {
 	return enable >= user_enabled;
-- 
1.8.4.5