From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org
Subject: [PATCH v8 20/61] PCI: Separate realloc list checking after allocation
Date: Tue, 27 Oct 2015 13:55:12 -0700 [thread overview]
Message-ID: <1445979353-1728-21-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1445979353-1728-1-git-send-email-yinghai@kernel.org>
We check the realloc list, as list must be empty after allocation.
Separate the realloc list checking to another function.
Add checking that is missed in acpiphp driver.
-v2: change to WARN_ON according to Rafael.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
---
drivers/pci/hotplug/acpiphp_glue.c | 1 +
drivers/pci/pci.h | 1 +
drivers/pci/setup-bus.c | 12 +++++++++---
3 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index ff53856..ce9fb21 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -507,6 +507,7 @@ static void enable_slot(struct acpiphp_slot *slot)
}
}
__pci_bus_assign_resources(bus, &add_list, NULL);
+ pci_bus_check_realloc(&add_list);
acpiphp_sanitize_bus(bus);
pcie_bus_configure_settings(bus);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 39d2c50..c34c2aa 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -238,6 +238,7 @@ void __pci_bus_size_bridges(struct pci_bus *bus,
void __pci_bus_assign_resources(const struct pci_bus *bus,
struct list_head *realloc_head,
struct list_head *fail_head);
+void pci_bus_check_realloc(struct list_head *realloc_head);
bool pci_bus_clip_resource(struct pci_dev *dev, int idx);
void pci_reassigndev_resource_alignment(struct pci_dev *dev);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index d49c6e5..53ab81f 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -280,6 +280,12 @@ out:
}
}
+void pci_bus_check_realloc(struct list_head *realloc_head)
+{
+ if (WARN_ON(!list_empty(realloc_head)))
+ free_list(realloc_head);
+}
+
/**
* assign_requested_resources_sorted() - satisfy resource requests
*
@@ -1733,7 +1739,7 @@ again:
/* Depth last, allocate resources and update the hardware. */
__pci_bus_assign_resources(bus, add_list, &fail_head);
if (add_list)
- BUG_ON(!list_empty(add_list));
+ pci_bus_check_realloc(add_list);
tried_times++;
/* any device complain? */
@@ -1808,7 +1814,7 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
again:
__pci_bus_size_bridges(parent, &add_list);
__pci_bridge_assign_resources(bridge, &add_list, &fail_head);
- BUG_ON(!list_empty(&add_list));
+ pci_bus_check_realloc(&add_list);
tried_times++;
if (list_empty(&fail_head))
@@ -1867,6 +1873,6 @@ void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
&add_list);
up_read(&pci_bus_sem);
__pci_bus_assign_resources(bus, &add_list, NULL);
- BUG_ON(!list_empty(&add_list));
+ pci_bus_check_realloc(&add_list);
}
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bus_resources);
--
1.8.4.5
next prev parent reply other threads:[~2015-10-27 20:55 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-27 20:54 [PATCH v8 00/61] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 01/61] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 02/61] PCI: Add pci_find_root_bus_resource() Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 03/61] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 04/61] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 05/61] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 06/61] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 07/61] PCI: Kill wrong quirk about M7101 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 08/61] PCI: Ignore BAR for ALi M1533 PCI-ISA bridge Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 09/61] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 10/61] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 11/61] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 12/61] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 13/61] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 14/61] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 15/61] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 16/61] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 17/61] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 18/61] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 19/61] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-27 20:55 ` Yinghai Lu [this message]
2015-10-27 20:55 ` [PATCH v8 21/61] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 22/61] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 23/61] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 24/61] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 25/61] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 26/61] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 27/61] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 28/61] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 29/61] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 30/61] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 31/61] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 32/61] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 33/61] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 34/61] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 35/61] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 36/61] PCI: Add __add_to_list() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 37/61] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 38/61] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 39/61] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 40/61] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 41/61] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 42/61] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 43/61] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 44/61] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 45/61] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 46/61] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 47/61] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 48/61] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 49/61] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 50/61] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 51/61] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 52/61] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 53/61] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 54/61] resources: Split out __allocate_resource() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 55/61] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 56/61] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 57/61] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 58/61] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 59/61] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 60/61] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 61/61] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
2015-10-30 21:47 ` [PATCH v8 00/61] PCI: Resource allocation cleanup for v4.4 Khalid Aziz
2015-10-31 1:53 ` Yinghai Lu
2015-10-31 18:51 ` David Miller
2015-10-31 20:47 ` Benjamin Herrenschmidt
2015-11-23 21:31 ` Khalid Aziz
2015-11-24 2:39 ` Yinghai Lu
2015-12-01 21:23 ` Khalid Aziz
2015-12-02 4:26 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445979353-1728-21-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=rjw@rjwysocki.net \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).