linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	David Miller <davem@davemloft.net>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
	Yijing Wang <wangyijing@huawei.com>,
	Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v8 61/61] PCI: Only try to assign io port only for root bus that support it
Date: Tue, 27 Oct 2015 13:55:53 -0700	[thread overview]
Message-ID: <1445979353-1728-62-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1445979353-1728-1-git-send-email-yinghai@kernel.org>

The PCI subsystem always assumes that I/O is supported on root bus and
tries to assign an I/O window to each child bus even if that is not the
case.

The use cases is on Intel 8 socket system that have 8 root buses,
last two root buses would not have io port resources from _CRS.

Check if root bus supports I/O, and later during sizing and
assigning, check that flags and skip those resources.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
 drivers/pci/probe.c     | 6 ++++++
 drivers/pci/setup-bus.c | 9 +++++++++
 include/linux/pci.h     | 1 +
 3 files changed, 16 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index f9589d9..d5fca94 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -339,6 +339,9 @@ static void pci_read_bridge_io(struct pci_bus *child)
 	struct pci_bus_region region;
 	struct resource *res;
 
+	if (!pci_find_host_bridge(child)->has_ioport)
+		return;
+
 	io_mask = PCI_IO_RANGE_MASK;
 	io_granularity = 0x1000;
 	if (dev->io_window_1k) {
@@ -2126,6 +2129,9 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 			bus_addr[0] = '\0';
 		dev_info(&b->dev, "root bus resource %pR%s\n", res, bus_addr);
 
+		if (resource_type(res) == IORESOURCE_IO)
+			bridge->has_ioport = 1;
+
 		if (resource_type(res) == IORESOURCE_MEM) {
 			if ((res->end - offset) > 0xffffffff)
 				bridge->has_mem64 = 1;
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 22ee1a1..f4918d7 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -226,6 +226,10 @@ static void pdev_assign_resources_prepare(struct pci_dev *dev,
 		if (resource_disabled(r) || r->parent)
 			continue;
 
+		if ((r->flags & IORESOURCE_IO) &&
+		    !pci_find_host_bridge(dev->bus)->has_ioport)
+			continue;
+
 		r_align = __pci_resource_alignment(dev, r, realloc_head);
 		if (!r_align) {
 			dev_warn(&dev->dev, "BAR %d: %pR has bogus alignment\n",
@@ -1189,6 +1193,11 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
 		min_size = 0;
 	}
 
+	if (!pci_find_host_bridge(bus)->has_ioport) {
+		b_res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
+		return;
+	}
+
 	min_align = window_alignment(bus, IORESOURCE_IO);
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		int i;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6bc56f1..9ffe03c 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -414,6 +414,7 @@ struct pci_host_bridge {
 	void *release_data;
 	unsigned int ignore_reset_delay:1;	/* for entire hierarchy */
 	unsigned int has_mem64:1;
+	unsigned int has_ioport:1;
 };
 
 #define	to_pci_host_bridge(n) container_of(n, struct pci_host_bridge, dev)
-- 
1.8.4.5


  parent reply	other threads:[~2015-10-27 20:55 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-27 20:54 [PATCH v8 00/61] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 01/61] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 02/61] PCI: Add pci_find_root_bus_resource() Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 03/61] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 04/61] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 05/61] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 06/61] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-27 20:54 ` [PATCH v8 07/61] PCI: Kill wrong quirk about M7101 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 08/61] PCI: Ignore BAR for ALi M1533 PCI-ISA bridge Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 09/61] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 10/61] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 11/61] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 12/61] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 13/61] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 14/61] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 15/61] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 16/61] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 17/61] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 18/61] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 19/61] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 20/61] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 21/61] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 22/61] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 23/61] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 24/61] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 25/61] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 26/61] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 27/61] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 28/61] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 29/61] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 30/61] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 31/61] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 32/61] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 33/61] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 34/61] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 35/61] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 36/61] PCI: Add __add_to_list() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 37/61] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 38/61] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 39/61] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 40/61] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 41/61] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 42/61] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 43/61] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 44/61] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 45/61] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 46/61] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 47/61] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 48/61] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 49/61] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 50/61] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 51/61] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 52/61] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 53/61] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 54/61] resources: Split out __allocate_resource() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 55/61] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 56/61] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 57/61] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 58/61] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 59/61] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-27 20:55 ` [PATCH v8 60/61] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-10-27 20:55 ` Yinghai Lu [this message]
2015-10-30 21:47 ` [PATCH v8 00/61] PCI: Resource allocation cleanup for v4.4 Khalid Aziz
2015-10-31  1:53   ` Yinghai Lu
2015-10-31 18:51     ` David Miller
2015-10-31 20:47       ` Benjamin Herrenschmidt
2015-11-23 21:31     ` Khalid Aziz
2015-11-24  2:39       ` Yinghai Lu
2015-12-01 21:23         ` Khalid Aziz
2015-12-02  4:26           ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445979353-1728-62-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=davem@davemloft.net \
    --cc=khalid.aziz@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@iam.tj \
    --cc=wangyijing@huawei.com \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).