From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v9 23/60] PCI: Cleanup res_to_dev_res() printout
Date: Thu, 10 Dec 2015 21:06:19 -0800 [thread overview]
Message-ID: <1449810416-2950-24-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1449810416-2950-1-git-send-email-yinghai@kernel.org>
Now get_res_add_size() and get_res_add_align() all have same printout
from res_to_dev_res(), and it is confusing.
Move out debug messages printout from res_to_dev_res(),
so later we will reuse res_to_dev_res() in other functions.
-v2: does not print out when add_size or min_align is 0
-v3: change to %#llx according to Bjorn.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 34 ++++++++++++++++++++--------------
1 file changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 7f7f46c..598254a 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -104,19 +104,9 @@ static struct pci_dev_resource *res_to_dev_res(struct list_head *head,
{
struct pci_dev_resource *dev_res;
- list_for_each_entry(dev_res, head, list) {
- if (dev_res->res == res) {
- int idx = res - &dev_res->dev->resource[0];
-
- dev_printk(KERN_DEBUG, &dev_res->dev->dev,
- "res[%d]=%pR res_to_dev_res add_size %llx min_align %llx\n",
- idx, dev_res->res,
- (unsigned long long)dev_res->add_size,
- (unsigned long long)dev_res->min_align);
-
+ list_for_each_entry(dev_res, head, list)
+ if (dev_res->res == res)
return dev_res;
- }
- }
return NULL;
}
@@ -127,7 +117,15 @@ static resource_size_t get_res_add_size(struct list_head *head,
struct pci_dev_resource *dev_res;
dev_res = res_to_dev_res(head, res);
- return dev_res ? dev_res->add_size : 0;
+ if (!dev_res || !dev_res->add_size)
+ return 0;
+
+ dev_printk(KERN_DEBUG, &dev_res->dev->dev,
+ "BAR %d: %pR get_res_add_size add_size %#llx\n",
+ (int)(res - &dev_res->dev->resource[0]),
+ res, (unsigned long long)dev_res->add_size);
+
+ return dev_res->add_size;
}
static resource_size_t get_res_add_align(struct list_head *head,
@@ -136,7 +134,15 @@ static resource_size_t get_res_add_align(struct list_head *head,
struct pci_dev_resource *dev_res;
dev_res = res_to_dev_res(head, res);
- return dev_res ? dev_res->min_align : 0;
+ if (!dev_res || !dev_res->min_align)
+ return 0;
+
+ dev_printk(KERN_DEBUG, &dev_res->dev->dev,
+ "BAR %d: %pR get_res_add_align min_align %#llx\n",
+ (int)(res - &dev_res->dev->resource[0]),
+ res, (unsigned long long)dev_res->min_align);
+
+ return dev_res->min_align;
}
--
1.8.4.5
next prev parent reply other threads:[~2015-12-11 5:13 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-11 5:05 [PATCH v9 00/60] PCI: Resource allocation cleanup for v4.5 Yinghai Lu
2015-12-11 5:05 ` [PATCH v9 01/60] PCI: Add pci_find_root_bus_resource() Yinghai Lu
2015-12-11 5:05 ` [PATCH v9 02/60] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-12-11 5:05 ` [PATCH v9 03/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 04/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 05/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 06/60] PCI: Kill wrong quirk about M7101 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 07/60] PCI: Ignore BAR for ALi M1533 PCI-ISA bridge Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 08/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 09/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 10/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 11/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 12/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 13/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 14/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 15/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 16/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 17/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 18/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 19/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 20/60] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 21/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 22/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-12-11 5:06 ` Yinghai Lu [this message]
2015-12-11 5:06 ` [PATCH v9 24/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 25/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 26/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 27/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 28/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 29/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 30/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 31/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 32/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 33/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 34/60] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 35/60] PCI: Add __add_to_list() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 36/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 37/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 38/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 39/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 40/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 41/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 42/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 43/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 44/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 45/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 46/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 47/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 48/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 49/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 50/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 51/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 52/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 53/60] resources: Split out __allocate_resource() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 59/60] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449810416-2950-24-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).