From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v9 34/60] PCI: Simplify res reference using in __assign_resources_sorted()
Date: Thu, 10 Dec 2015 21:06:30 -0800 [thread overview]
Message-ID: <1449810416-2950-35-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1449810416-2950-1-git-send-email-yinghai@kernel.org>
There are couples of dev_res->res reference, to make code more readable
use res instead of dev_res->res directly.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 0fc9659..715e627 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -458,6 +458,7 @@ static void __assign_resources_sorted(struct list_head *head,
struct pci_dev_resource *dev_res, *tmp_res;
unsigned long fail_type;
resource_size_t add_align;
+ struct resource *res;
/* Check if optional add_size is there */
if (!realloc_head || list_empty(realloc_head))
@@ -473,8 +474,8 @@ static void __assign_resources_sorted(struct list_head *head,
/* Update res in head list with add_size in realloc_head list */
list_for_each_entry(dev_res, head, list) {
- dev_res->res->end += get_res_add_size(realloc_head,
- dev_res->res);
+ res = dev_res->res;
+ res->end += get_res_add_size(realloc_head, res);
/*
* There are two kinds of additional resources in the list:
@@ -483,16 +484,16 @@ static void __assign_resources_sorted(struct list_head *head,
* 2. resource with IORESOURCE_SIZEALIGN
* update size above already change alignment.
*/
- if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
+ if (!(res->flags & IORESOURCE_STARTALIGN))
continue;
- add_align = get_res_add_align(realloc_head, dev_res->res);
+ add_align = get_res_add_align(realloc_head, res);
if (add_align) {
- resource_size_t r_size = resource_size(dev_res->res);
+ resource_size_t r_size = resource_size(res);
- dev_res->res->start = add_align;
- dev_res->res->end = add_align + r_size - 1;
+ res->start = add_align;
+ res->end = add_align + r_size - 1;
}
}
@@ -514,21 +515,21 @@ static void __assign_resources_sorted(struct list_head *head,
/* check failed type */
fail_type = pci_fail_res_type_mask(&local_fail_head);
/* remove not need to be released assigned res from head list etc */
- list_for_each_entry_safe(dev_res, tmp_res, head, list)
- if (dev_res->res->parent &&
- !pci_need_to_release(fail_type, dev_res->res)) {
+ list_for_each_entry_safe(dev_res, tmp_res, head, list) {
+ res = dev_res->res;
+ if (res->parent && !pci_need_to_release(fail_type, res)) {
/* remove it from realloc_head list */
- remove_from_list(realloc_head, dev_res->res);
- remove_from_list(&save_head, dev_res->res);
+ remove_from_list(realloc_head, res);
+ remove_from_list(&save_head, res);
list_del(&dev_res->list);
kfree(dev_res);
}
+ }
free_list(&local_fail_head);
/* Release assigned resource */
list_for_each_entry(dev_res, head, list) {
- struct resource *res = dev_res->res;
-
+ res = dev_res->res;
if (res->parent) {
dev_printk(KERN_DEBUG, &dev_res->dev->dev,
"BAR %d: released %pR\n",
@@ -539,8 +540,7 @@ static void __assign_resources_sorted(struct list_head *head,
}
/* Restore start/end/flags from saved list */
list_for_each_entry(save_res, &save_head, list) {
- struct resource *res = save_res->res;
-
+ res = save_res->res;
res->start = save_res->start;
res->end = save_res->end;
res->flags = save_res->flags;
--
1.8.4.5
next prev parent reply other threads:[~2015-12-11 6:08 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-11 5:05 [PATCH v9 00/60] PCI: Resource allocation cleanup for v4.5 Yinghai Lu
2015-12-11 5:05 ` [PATCH v9 01/60] PCI: Add pci_find_root_bus_resource() Yinghai Lu
2015-12-11 5:05 ` [PATCH v9 02/60] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-12-11 5:05 ` [PATCH v9 03/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 04/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 05/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 06/60] PCI: Kill wrong quirk about M7101 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 07/60] PCI: Ignore BAR for ALi M1533 PCI-ISA bridge Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 08/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 09/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 10/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 11/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 12/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 13/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 14/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 15/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 16/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 17/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 18/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 19/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 20/60] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 21/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 22/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 23/60] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 24/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 25/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 26/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 27/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 28/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 29/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 30/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 31/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 32/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 33/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-12-11 5:06 ` Yinghai Lu [this message]
2015-12-11 5:06 ` [PATCH v9 35/60] PCI: Add __add_to_list() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 36/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 37/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 38/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 39/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 40/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 41/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 42/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 43/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 44/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 45/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 46/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 47/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 48/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 49/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 50/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 51/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 52/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 53/60] resources: Split out __allocate_resource() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 59/60] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-12-11 5:06 ` [PATCH v9 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449810416-2950-35-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).