[PATCH v7 4/5] arm64: pci: Add ACPI support

[Jayachandran C <jchandra@broadcom.com>]

Add functions needed for ACPI support and prepare arm64 for using
CONFIG_ACPI_PCI_HOST_GENERIC for the ACPI based PCI controller.

pci_acpi_scan_root(), raw_pci_read() and raw_pci_write() are marked
as weak so that they can be implemented by the generic ACPI PCI
driver.

pcibios_enable_device() and pcibios_disable_device() have been added
to handle acpi irq enable and disable. pcibios_add_bus() and
pcibios_remove_bus() have been added call the corresponding ACPI
functions.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
---
 arch/arm64/Kconfig      |  3 +++
 arch/arm64/kernel/pci.c | 34 +++++++++++++++++++++++++++++-----
 2 files changed, 32 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 8cc6228..6bb21d8 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -234,6 +234,9 @@ config PCI_DOMAINS_GENERIC
 config PCI_SYSCALL
 	def_bool PCI
 
+config PCI_MMCONFIG
+	def_bool PCI && ACPI
+
 source "drivers/pci/Kconfig"
 source "drivers/pci/pcie/Kconfig"
 source "drivers/pci/hotplug/Kconfig"
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index b3d098b..db0a6a9 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -17,6 +17,7 @@
 #include <linux/mm.h>
 #include <linux/of_pci.h>
 #include <linux/of_platform.h>
+#include <linux/pci-acpi.h>
 #include <linux/slab.h>
 
 #include <asm/pci-bridge.h>
@@ -48,9 +49,22 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	if (pci_has_flag(PCI_PROBE_ONLY))
 		return 0;
 
+#ifdef CONFIG_ACPI
+	if (acpi_find_root_bridge_handle(dev))
+		acpi_pci_irq_enable(dev);
+#endif
+
 	return pci_enable_resources(dev, mask);
 }
 
+void pcibios_disable_device(struct pci_dev *dev)
+{
+#ifdef CONFIG_ACPI
+	if (acpi_find_root_bridge_handle(dev))
+		acpi_pci_irq_disable(dev);
+#endif
+}
+
 /*
  * Try to assign the IRQ number from DT when adding a new device
  */
@@ -62,15 +76,15 @@ int pcibios_add_device(struct pci_dev *dev)
 }
 
 /*
- * raw_pci_read/write - Platform-specific PCI config space access.
+ * ACPI uses these - leave it to the generic ACPI PCI driver
  */
-int raw_pci_read(unsigned int domain, unsigned int bus,
+int __weak raw_pci_read(unsigned int domain, unsigned int bus,
 		  unsigned int devfn, int reg, int len, u32 *val)
 {
 	return -ENXIO;
 }
 
-int raw_pci_write(unsigned int domain, unsigned int bus,
+int __weak raw_pci_write(unsigned int domain, unsigned int bus,
 		unsigned int devfn, int reg, int len, u32 val)
 {
 	return -ENXIO;
@@ -78,9 +92,19 @@ int raw_pci_write(unsigned int domain, unsigned int bus,
 
 #ifdef CONFIG_ACPI
 /* Root bridge scanning */
-struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+struct pci_bus * __weak pci_acpi_scan_root(struct acpi_pci_root *root)
 {
-	/* TODO: Should be revisited when implementing PCI on ACPI */
 	return NULL;
 }
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	acpi_pci_remove_bus(bus);
+}
+
 #endif
-- 
1.9.1