From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
Yijing Wang <wangyijing@huawei.com>,
Khalid Aziz <khalid.aziz@oracle.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v10 58/59] PCI: Don't set flags to 0 when assign resource fail
Date: Wed, 24 Feb 2016 18:12:49 -0800 [thread overview]
Message-ID: <1456366370-28995-59-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1456366370-28995-1-git-send-email-yinghai@kernel.org>
We want to keep resource flags instead of clearing it after resource
allocation fails.
Make flags take IORESOURCE_UNSET | IORESOURCE_DISABLED instead.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/bus.c | 2 +-
drivers/pci/setup-bus.c | 45 +++++++++++++++++++++++----------------------
drivers/pci/setup-res.c | 3 ++-
3 files changed, 26 insertions(+), 24 deletions(-)
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 7f7bf04..e71c60d 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -142,7 +142,7 @@ static int pci_bus_alloc_from_region(struct pci_bus *bus, struct resource *res,
pci_bus_for_each_resource(bus, r, i) {
resource_size_t min_used = min;
- if (!r)
+ if (!r || resource_disabled(r))
continue;
/* type_mask must match */
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index dd764c4..e1d7b79 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -264,13 +264,6 @@ static void __dev_assign_resources_prepare(struct pci_dev *dev,
pdev_assign_resources_prepare(dev, realloc_head, head);
}
-static inline void reset_resource(struct resource *res)
-{
- res->start = 0;
- res->end = 0;
- res->flags = 0;
-}
-
static void sort_resources(struct list_head *head)
{
struct pci_dev_resource *res1, *tmp_res, *res2;
@@ -337,7 +330,7 @@ static void reassign_resources_sorted(struct list_head *realloc_head,
res->start = align;
res->end = res->start + add_size - 1;
if (pci_assign_resource(add_res->dev, idx))
- reset_resource(res);
+ res->flags |= IORESOURCE_DISABLED;
} else {
/* could just assigned with alt, add difference ? */
resource_size_t size;
@@ -391,7 +384,7 @@ static void assign_requested_resources_sorted(struct list_head *head,
pci_assign_resource(dev_res->dev, idx)) {
if (fail_head)
add_to_list(fail_head, dev_res->dev, res);
- reset_resource(res);
+ res->flags |= IORESOURCE_DISABLED;
}
}
}
@@ -677,7 +670,7 @@ static void __assign_resources_alt_sorted(struct list_head *head,
if (!res_to_dev_res(local_fail_head, res))
add_to_list(local_fail_head, fail_res->dev, res);
- reset_resource(res);
+ res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
}
free_list(&local_alt_fail_head);
}
@@ -843,7 +836,7 @@ static void pci_setup_bridge_io(struct pci_dev *bridge)
/* Set up the top and bottom of the PCI I/O segment for this bus. */
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
- if (res->flags & IORESOURCE_IO) {
+ if ((res->flags & IORESOURCE_IO) && !(res->flags & IORESOURCE_UNSET)) {
pci_read_config_word(bridge, PCI_IO_BASE, &l);
io_base_lo = (region.start >> 8) & io_mask;
io_limit_lo = (region.end >> 8) & io_mask;
@@ -873,7 +866,8 @@ static void pci_setup_bridge_mmio(struct pci_dev *bridge)
/* Set up the top and bottom of the PCI Memory segment for this bus. */
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
- if (res->flags & IORESOURCE_MEM) {
+ if ((res->flags & IORESOURCE_MEM) &&
+ !(res->flags & IORESOURCE_UNSET)) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
dev_info(&bridge->dev, " bridge window %pR\n", res);
@@ -898,7 +892,8 @@ static void pci_setup_bridge_mmio_pref(struct pci_dev *bridge)
bu = lu = 0;
res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
- if (res->flags & IORESOURCE_PREFETCH) {
+ if ((res->flags & IORESOURCE_PREFETCH) &&
+ !(res->flags & IORESOURCE_UNSET)) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
if (res->flags & IORESOURCE_MEM_64) {
@@ -1028,6 +1023,7 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
b_res[1].flags |= IORESOURCE_MEM;
+ b_res[1].flags &= ~IORESOURCE_DISABLED;
pci_read_config_word(bridge, PCI_IO_BASE, &io);
if (!io) {
@@ -1035,8 +1031,10 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
pci_read_config_word(bridge, PCI_IO_BASE, &io);
pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
}
- if (io)
+ if (io) {
b_res[0].flags |= IORESOURCE_IO;
+ b_res[0].flags &= ~IORESOURCE_DISABLED;
+ }
/* DECchip 21050 pass 2 errata: the bridge may miss an address
disconnect boundary by one PCI data phase.
@@ -1053,6 +1051,7 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
}
if (pmem) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ b_res[2].flags &= ~IORESOURCE_DISABLED;
if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
PCI_PREF_RANGE_TYPE_64) {
b_res[2].flags |= IORESOURCE_MEM_64;
@@ -1198,8 +1197,10 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
struct resource *r = &dev->resource[i];
unsigned long r_size, r_add_size;
- if (r->parent || !(r->flags & IORESOURCE_IO))
+ if (r->parent || !(r->flags & IORESOURCE_IO) ||
+ resource_disabled(r))
continue;
+
r_size = resource_size(r);
if (r_size < 0x400)
@@ -1240,7 +1241,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
b_res, &bus->busn_res);
- b_res->flags = 0;
+ b_res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
return;
}
@@ -1533,7 +1534,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (r->parent || (flags & IORESOURCE_PCI_FIXED) ||
((flags & mask) != type &&
(flags & mask) != type2 &&
- (flags & mask) != type3))
+ (flags & mask) != type3) ||
+ resource_disabled(r))
continue;
r_size = resource_size(r);
@@ -1554,7 +1556,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (align > (1ULL<<37)) { /*128 Gb*/
dev_warn(&dev->dev, "disabling BAR %d: %pR (bad alignment %#llx)\n",
i, r, (unsigned long long) align);
- r->flags = 0;
+ r->flags |= IORESOURCE_UNSET |
+ IORESOURCE_DISABLED;
continue;
}
@@ -1651,7 +1654,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window %pR to %pR (unused)\n",
b_res, &bus->busn_res);
- b_res->flags = 0;
+ b_res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
return 0;
}
@@ -2111,7 +2114,7 @@ static void pci_bridge_release_resources(struct pci_bus *bus,
/* keep the old size */
r->end = resource_size(r) - 1;
r->start = 0;
- r->flags = 0;
+ r->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
/* avoiding touch the one without PREF */
if (type & IORESOURCE_PREFETCH)
@@ -2380,7 +2383,6 @@ again:
restore_resource(fail_res, res);
if (fail_res->dev->subordinate) {
- res->flags = 0;
/* last or third times and later */
if (tried_times + 1 == pci_try_num ||
tried_times + 1 > 2)
@@ -2464,7 +2466,6 @@ again:
restore_resource(fail_res, res);
if (fail_res->dev->subordinate) {
- res->flags = 0;
/* last time */
reset_bridge_resource_size(fail_res->dev, res);
}
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index b196fcd..2a07e39 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -371,7 +371,8 @@ int pci_enable_resources(struct pci_dev *dev, int mask)
r = &dev->resource[i];
- if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ||
+ resource_disabled(r))
continue;
if ((i == PCI_ROM_RESOURCE) &&
(!(r->flags & IORESOURCE_ROM_ENABLE)))
--
1.8.4.5
next prev parent reply other threads:[~2016-02-25 2:12 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 2:11 [PATCH v10 00/59] PCI: Resource allocation cleanup for v4.6 Yinghai Lu
2016-02-25 2:11 ` [PATCH v10 01/59] PCI: Add pci_find_root_bus_resource() Yinghai Lu
2016-03-10 3:54 ` Bjorn Helgaas
2016-03-11 21:21 ` Yinghai Lu
2016-02-25 2:11 ` [PATCH v10 02/59] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2016-03-10 18:24 ` Bjorn Helgaas
2016-03-10 19:47 ` David Miller
2016-03-12 8:22 ` Yinghai Lu
2016-03-12 11:26 ` Bjorn Helgaas
2016-03-19 6:01 ` Yinghai Lu
2016-02-25 2:11 ` [PATCH v10 03/59] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2016-02-25 2:11 ` [PATCH v10 04/59] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2016-02-25 2:11 ` [PATCH v10 05/59] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2016-02-25 2:11 ` [PATCH v10 06/59] PCI: Kill wrong quirk about M7101 Yinghai Lu
2016-03-10 17:40 ` Bjorn Helgaas
2016-03-11 22:08 ` Yinghai Lu
2016-03-12 1:06 ` Linus Torvalds
2016-03-12 7:52 ` Meelis Roos
2016-03-12 8:26 ` Yinghai Lu
2016-03-12 8:39 ` Meelis Roos
2016-04-25 20:57 ` Bjorn Helgaas
2016-02-25 2:11 ` [PATCH v10 07/59] PCI: Ignore BAR for ALi M1533 PCI-ISA bridge Yinghai Lu
2016-03-10 17:54 ` Bjorn Helgaas
2016-03-11 22:21 ` Yinghai Lu
2016-02-25 2:11 ` [PATCH v10 08/59] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 09/59] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 10/59] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 11/59] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 12/59] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 13/59] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 14/59] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 15/59] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 16/59] PCI: Don't release fixed resource for realloc Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 17/59] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 18/59] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 19/59] PCI: Separate realloc list checking after allocation Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 20/59] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 21/59] PCI: Get new realloc size for bridge for last try Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 22/59] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 23/59] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 24/59] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 25/59] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 26/59] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 27/59] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 28/59] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 29/59] PCI: Reorder resources list for required/optional resources Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 30/59] PCI: Remove duplicated code for resource sorting Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 31/59] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 32/59] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 33/59] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 34/59] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 35/59] PCI: Add __add_to_list() Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 36/59] PCI: Cache window alignment value during bus sizing Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 37/59] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 38/59] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 39/59] PCI: Move comment to pci_need_to_release() Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 40/59] PCI: Separate required+optional assigning to another function Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 41/59] PCI: Skip required+optional if there is no optional Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 42/59] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 43/59] PCI: Add alt_size ressource allocation support Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 44/59] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 45/59] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 46/59] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 47/59] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 48/59] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 49/59] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 50/59] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 51/59] PCI: Unify skip_ioresource_align() Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 52/59] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 53/59] resources: Make allocate_resource() return best fit resource Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 54/59] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 55/59] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 56/59] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2016-02-25 2:12 ` [PATCH v10 57/59] PCI: Introduce resource_disabled() Yinghai Lu
2016-02-25 2:12 ` Yinghai Lu [this message]
2016-02-25 2:12 ` [PATCH v10 59/59] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
2016-03-10 18:30 ` [PATCH v10 00/59] PCI: Resource allocation cleanup for v4.6 Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456366370-28995-59-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@iam.tj \
--cc=wangyijing@huawei.com \
--cc=weiyang@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).