* [PATCH 1/2] VMD: Document code for maintainability
@ 2016-03-02 22:31 Keith Busch
2016-03-02 22:31 ` [PATCH 2/2] VMD: Set bus resource start to 0 Keith Busch
2016-03-10 20:54 ` [PATCH 1/2] VMD: Document code for maintainability Bjorn Helgaas
0 siblings, 2 replies; 3+ messages in thread
From: Keith Busch @ 2016-03-02 22:31 UTC (permalink / raw)
To: linux-pci, Bjorn Helgaas; +Cc: Jon Derrick, Keith Busch
This comments the less obvious portion of the code for setting up
memory windows, and the platform dependency for initializing the h/w
with appropriate resources.
Signed-off-by: Keith Busch <keith.busch@intel.com>
---
arch/x86/pci/vmd.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/x86/pci/vmd.c b/arch/x86/pci/vmd.c
index d57e480..68faa5e 100644
--- a/arch/x86/pci/vmd.c
+++ b/arch/x86/pci/vmd.c
@@ -532,6 +532,23 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
};
+ /*
+ * If the window is below 4GB, clear IORESOURCE_MEM_64 so we can
+ * put 32-bit resources in the window.
+ *
+ * There's no hardware reason why a 64-bit window *couldn't*
+ * contain a 32-bit resource, but pbus_size_mem() computes the
+ * bridge window size assuming a 64-bit window will contain no
+ * 32-bit resources. __pci_assign_resource() enforces that
+ * artificial restriction to make sure everything will fit.
+ *
+ * The only way we could use a 64-bit non-prefechable MEMBAR is
+ * if its address is <4GB so that we can convert it to a 32-bit
+ * resource. To be visible to the host OS, all VMD endpoints must
+ * be initially configured by platform BIOS, which includes setting
+ * up these resources. We can assume the device is configured
+ * according to the platform needs.
+ */
res = &vmd->dev->resource[VMD_MEMBAR1];
upper_bits = upper_32_bits(res->end);
flags = res->flags & ~IORESOURCE_SIZEALIGN;
--
2.7.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] VMD: Set bus resource start to 0
2016-03-02 22:31 [PATCH 1/2] VMD: Document code for maintainability Keith Busch
@ 2016-03-02 22:31 ` Keith Busch
2016-03-10 20:54 ` [PATCH 1/2] VMD: Document code for maintainability Bjorn Helgaas
1 sibling, 0 replies; 3+ messages in thread
From: Keith Busch @ 2016-03-02 22:31 UTC (permalink / raw)
To: linux-pci, Bjorn Helgaas; +Cc: Jon Derrick, Keith Busch
The bus always starts at 0. Due to alignment and down-casting, this
happened to work before, but looked alarmingly incorrect in kernel logs.
Signed-off-by: Keith Busch <keith.busch@intel.com>
---
arch/x86/pci/vmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/pci/vmd.c b/arch/x86/pci/vmd.c
index 68faa5e..f60ecaa 100644
--- a/arch/x86/pci/vmd.c
+++ b/arch/x86/pci/vmd.c
@@ -527,7 +527,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
res = &vmd->dev->resource[VMD_CFGBAR];
vmd->resources[0] = (struct resource) {
.name = "VMD CFGBAR",
- .start = res->start,
+ .start = 0,
.end = (resource_size(res) >> 20) - 1,
.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
};
--
2.7.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] VMD: Document code for maintainability
2016-03-02 22:31 [PATCH 1/2] VMD: Document code for maintainability Keith Busch
2016-03-02 22:31 ` [PATCH 2/2] VMD: Set bus resource start to 0 Keith Busch
@ 2016-03-10 20:54 ` Bjorn Helgaas
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Helgaas @ 2016-03-10 20:54 UTC (permalink / raw)
To: Keith Busch; +Cc: linux-pci, Bjorn Helgaas, Jon Derrick
On Wed, Mar 02, 2016 at 03:31:03PM -0700, Keith Busch wrote:
> This comments the less obvious portion of the code for setting up
> memory windows, and the platform dependency for initializing the h/w
> with appropriate resources.
>
> Signed-off-by: Keith Busch <keith.busch@intel.com>
I applied both patches to pci/host-vmd for v4.6, thanks, Keith!
> ---
> arch/x86/pci/vmd.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/x86/pci/vmd.c b/arch/x86/pci/vmd.c
> index d57e480..68faa5e 100644
> --- a/arch/x86/pci/vmd.c
> +++ b/arch/x86/pci/vmd.c
> @@ -532,6 +532,23 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
> .flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
> };
>
> + /*
> + * If the window is below 4GB, clear IORESOURCE_MEM_64 so we can
> + * put 32-bit resources in the window.
> + *
> + * There's no hardware reason why a 64-bit window *couldn't*
> + * contain a 32-bit resource, but pbus_size_mem() computes the
> + * bridge window size assuming a 64-bit window will contain no
> + * 32-bit resources. __pci_assign_resource() enforces that
> + * artificial restriction to make sure everything will fit.
> + *
> + * The only way we could use a 64-bit non-prefechable MEMBAR is
> + * if its address is <4GB so that we can convert it to a 32-bit
> + * resource. To be visible to the host OS, all VMD endpoints must
> + * be initially configured by platform BIOS, which includes setting
> + * up these resources. We can assume the device is configured
> + * according to the platform needs.
> + */
> res = &vmd->dev->resource[VMD_MEMBAR1];
> upper_bits = upper_32_bits(res->end);
> flags = res->flags & ~IORESOURCE_SIZEALIGN;
> --
> 2.7.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-03-10 20:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-02 22:31 [PATCH 1/2] VMD: Document code for maintainability Keith Busch
2016-03-02 22:31 ` [PATCH 2/2] VMD: Set bus resource start to 0 Keith Busch
2016-03-10 20:54 ` [PATCH 1/2] VMD: Document code for maintainability Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).