Re: [PATCH v3 0/2] Add PCIe driver support for imx6sx

[Christoph Fritz <chf.fritz@googlemail.com>]

On Mon, 2016-03-07 at 09:20 +0100, Christoph Fritz wrote:
> On Thu, 2016-03-03 at 01:48 +0000, Richard Zhu wrote:
> > > -----Original Message-----
> > > From: Christoph Fritz [mailto:chf.fritz@googlemail.com]
> > > Sent: Thursday, February 25, 2016 10:48 PM
> > > To: Richard Zhu; Lucas Stach; Shawn Guo; Fabio Estevam; Bjorn Helgaas; Lee
> > > Jones
> > > Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org
> > > Subject: [PATCH v3 0/2] Add PCIe driver support for imx6sx
> > > 
> > > v3:
> > >  * adapt devicetree bindings documentation fsl,imx6q-pcie.txt
> > > v2:
> > >  * leave out regulator handling from driver, will be done later
> > >    in PM subsystem
> > >  * use BIT() macro for MFD
> > > 
> > > Christoph Fritz (2):
> > >   MFD: imx6sx: Add PCIe register definitions for iomuxc gpr
> > >   PCI: imx6: add initial imx6sx support
> > > 
> > >  .../devicetree/bindings/pci/fsl,imx6q-pcie.txt     |   6 +-
> > >  drivers/pci/host/pci-imx6.c                        | 130 ++++++++++++++-------
> > >  include/linux/mfd/syscon/imx6q-iomuxc-gpr.h        |   5 +
> > >  3 files changed, 101 insertions(+), 40 deletions(-)
> > > 
> > > --
> > > 2.1.4
> > 
> > [Zhu hongxing]  Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
> > Richard
> > Best Regards
> 
> @Bjorn: I suppose the PCI patch need to go through your tree. Would you
> pick up this patch?

*ping*
Do you want me to rebase my patch to your pci/host-imx6 branch?

Thanks
 -- Christoph