From: Christoph Fritz <chf.fritz@googlemail.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Richard Zhu <hongxing.zhu@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <fabio.estevam@nxp.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Lee Jones <lee.jones@linaro.org>,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: PCI: imx6: Factor out ref clock enable
Date: Sun, 20 Mar 2016 08:29:51 +0100 [thread overview]
Message-ID: <1458458991.1884.0.camel@googlemail.com> (raw)
In-Reply-To: <1457911855.16725.41.camel@googlemail.com>
*ping*
On Mon, 2016-03-14 at 00:30 +0100, Christoph Fritz wrote:
> commit dfcc1a16e6954e8ca6cadfc9dd309db6b6ef46b2
> Author: Bjorn Helgaas <bhelgaas@google.com>
> Date: Fri, 11 Mar 2016 11:15:36 -0600
>
> Factor out ref clock enable to make it cleaner to add imx6sx support. No
> functional change intended.
>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
> drivers/pci/host/pci-imx6.c | 36 ++++++++++++++++++++++++------------
> 1 file changed, 24 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index bd3f7d0..4e0e47f 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
> @@ -264,6 +264,23 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
> return 0;
> }
>
> +static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> +{
> + /* power up core phy and enable ref clock */
> + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
> + IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
> + /*
> + * the async reset input need ref clock to sync internally,
> + * when the ref clock comes after reset, internal synced
> + * reset time is too short, cannot meet the requirement.
> + * add one ~10us delay here.
> + */
> + udelay(10);
> + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
> + IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
> + return 0;
> +}
> +
> static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
> {
> struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
> @@ -287,18 +304,11 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
> goto err_pcie;
> }
>
> - /* power up core phy and enable ref clock */
> - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
> - IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
> - /*
> - * the async reset input need ref clock to sync internally,
> - * when the ref clock comes after reset, internal synced
> - * reset time is too short, cannot meet the requirement.
> - * add one ~10us delay here.
> - */
> - udelay(10);
> - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
> - IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
> + ret = imx6_pcie_enable_ref_clk(imx6_pcie);
> + if (ret) {
> + dev_err(pp->dev, "unable to enable pcie ref clock\n");
> + goto err_ref_clk;
> + }
>
> /* allow the clocks to stabilize */
> usleep_range(200, 500);
> @@ -311,6 +321,8 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
> }
> return 0;
>
> +err_ref_clk:
> + clk_disable_unprepare(imx6_pcie->pcie);
> err_pcie:
> clk_disable_unprepare(imx6_pcie->pcie_bus);
> err_pcie_bus:
next prev parent reply other threads:[~2016-03-20 7:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 14:47 [PATCH v3 0/2] Add PCIe driver support for imx6sx Christoph Fritz
2016-02-25 14:47 ` [PATCH v3 1/2] MFD: imx6sx: Add PCIe register definitions for iomuxc gpr Christoph Fritz
2016-03-08 4:32 ` Lee Jones
2016-02-25 14:47 ` [PATCH v3 2/2] PCI: imx6: add initial imx6sx support Christoph Fritz
2016-03-11 17:58 ` Bjorn Helgaas
2016-03-13 23:26 ` Christoph Fritz
2016-03-13 23:30 ` PCI: imx6: Factor out ref clock enable Christoph Fritz
2016-03-20 7:29 ` Christoph Fritz [this message]
2016-04-05 21:56 ` Bjorn Helgaas
2016-03-13 23:31 ` [PATCH v4] PCI: imx6: Add initial imx6sx support Christoph Fritz
2016-03-20 7:30 ` Christoph Fritz
2016-04-05 21:56 ` Bjorn Helgaas
2016-03-03 1:41 ` [PATCH v3 0/2] Add PCIe driver support for imx6sx Christoph Fritz
2016-03-03 1:46 ` Richard Zhu
2016-03-03 1:48 ` Richard Zhu
2016-03-07 8:20 ` Christoph Fritz
2016-03-09 15:39 ` Christoph Fritz
2016-03-09 15:53 ` Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458458991.1884.0.camel@googlemail.com \
--to=chf.fritz@googlemail.com \
--cc=bhelgaas@google.com \
--cc=fabio.estevam@nxp.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).