From: Christoph Hellwig <hch@lst.de>
To: linux-pci@vger.kernel.org
Cc: agordeev@redhat.com, linux-kernel@vger.kernel.org
Subject: [PATCH 1/5] pci: add a pci_msix_desc_addr helper
Date: Tue, 12 Jul 2016 18:20:14 +0900 [thread overview]
Message-ID: <1468315218-20490-2-git-send-email-hch@lst.de> (raw)
In-Reply-To: <1468315218-20490-1-git-send-email-hch@lst.de>
To factor out the calculation of the base address for a given MSI-X vector.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/pci/msi.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index a080f44..0d94fbf 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -207,6 +207,12 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
desc->masked = __pci_msi_desc_mask_irq(desc, mask, flag);
}
+static void __iomem *pci_msix_desc_addr(struct msi_desc *desc)
+{
+ return desc->mask_base +
+ desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+}
+
/*
* This internal function does not flush PCI writes to the device.
* All users must ensure that they read from the device before either
@@ -217,8 +223,6 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag)
{
u32 mask_bits = desc->masked;
- unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL;
if (pci_msi_ignore_mask)
return 0;
@@ -226,7 +230,7 @@ u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag)
mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
if (flag)
mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT;
- writel(mask_bits, desc->mask_base + offset);
+ writel(mask_bits, pci_msix_desc_addr(desc) + PCI_MSIX_ENTRY_VECTOR_CTRL);
return mask_bits;
}
@@ -284,8 +288,7 @@ void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
BUG_ON(dev->current_state != PCI_D0);
if (entry->msi_attrib.is_msix) {
- void __iomem *base = entry->mask_base +
- entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+ void __iomem *base = pci_msix_desc_addr(entry);
msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
@@ -315,9 +318,7 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
if (dev->current_state != PCI_D0) {
/* Don't touch the hardware now */
} else if (entry->msi_attrib.is_msix) {
- void __iomem *base;
- base = entry->mask_base +
- entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
+ void __iomem *base = pci_msix_desc_addr(entry);
writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
--
2.1.4
next prev parent reply other threads:[~2016-07-12 9:20 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-12 9:20 pci: automatic interrupt affinity for MSI/MSI-X capable devices V2 Christoph Hellwig
2016-07-12 9:20 ` Christoph Hellwig [this message]
2016-07-12 12:59 ` [PATCH 1/5] pci: add a pci_msix_desc_addr helper Alexander Gordeev
2016-07-12 9:20 ` [PATCH 2/5] pci: switch msix_program_entries to use pci_msix_desc_addr Christoph Hellwig
2016-07-12 12:59 ` Alexander Gordeev
2016-07-12 9:20 ` [PATCH 3/5] pci: make the entries argument to pci_enable_msix optional Christoph Hellwig
2016-07-12 9:20 ` [PATCH 4/5] pci: Provide sensible irq vector alloc/free routines Christoph Hellwig
2016-07-12 12:58 ` Alexander Gordeev
2016-07-12 9:20 ` [PATCH 5/5] pci: spread interrupt vectors in pci_alloc_irq_vectors Christoph Hellwig
2016-07-12 12:57 ` Alexander Gordeev
2016-07-21 21:06 ` pci: automatic interrupt affinity for MSI/MSI-X capable devices V2 Bjorn Helgaas
2016-07-21 21:10 ` Christoph Hellwig
-- strict thread matches above, loose matches on Subject: below --
2016-07-10 11:57 pci: automatic interrupt affinity for MSI/MSI-X capable devices Christoph Hellwig
2016-07-10 11:57 ` [PATCH 1/5] pci: add a pci_msix_desc_addr helper Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468315218-20490-2-git-send-email-hch@lst.de \
--to=hch@lst.de \
--cc=agordeev@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).