From: Rajat Jain <rajatja@google.com>
To: Martin Mares <mj@ucw.cz>,
bhelgaas@google.com, linux-pci@vger.kernel.org,
David Box <david.e.box@linux.intel.com>
Cc: Rajat Jain <rajatja@google.com>,
rajatxjain@gmail.com, briannorris@google.com
Subject: [PATCH v2] lspci: Parse all the L1 PM substate capability regs
Date: Thu, 8 Sep 2016 17:05:30 -0700 [thread overview]
Message-ID: <1473379530-70905-1-git-send-email-rajatja@google.com> (raw)
In-Reply-To: <1472747248-60993-1-git-send-email-rajatja@google.com>
Parse the control registers to display all the L1 PM
substate configuration information.
Signed-off-by: Rajat Jain <rajatja@google.com>
---
V2: Fix the LTR1.2 threshold scaling
| 14 +++++++++
ls-ecaps.c | 94 ++++++++++++++++++++++++++++++++++++++++++------------------
2 files changed, 80 insertions(+), 28 deletions(-)
--git a/lib/header.h b/lib/header.h
index 1c5968b..0341ec6 100644
--- a/lib/header.h
+++ b/lib/header.h
@@ -1117,6 +1117,20 @@
#define PCI_DPC_STS_PIO_FEP(x) (((x) >> 8) & 0x1f) /* DPC PIO First Error Pointer */
#define PCI_DPC_SOURCE 10 /* DPC Source ID */
+/* L1 PM Substates Extended Capability */
+#define PCI_L1PM_SUBSTAT_CAP 0x4 /* L1 PM Substate Capability */
+#define PCI_L1PM_SUBSTAT_CAP_PM_L12 0x1 /* PCI-PM L1.2 Supported */
+#define PCI_L1PM_SUBSTAT_CAP_PM_L11 0x2 /* PCI-PM L1.1 Supported */
+#define PCI_L1PM_SUBSTAT_CAP_ASPM_L12 0x4 /* ASPM L1.2 Supported */
+#define PCI_L1PM_SUBSTAT_CAP_ASPM_L11 0x8 /* ASPM L1.1 Supported */
+#define PCI_L1PM_SUBSTAT_CAP_L1PM_SUPP 0x16 /* L1 Pm Substates supported */
+#define PCI_L1PM_SUBSTAT_CTL1 0x8 /* L1 PM Substate Control 1 */
+#define PCI_L1PM_SUBSTAT_CTL1_PM_L12 0x1 /* PCI-PM L1.2 Enable */
+#define PCI_L1PM_SUBSTAT_CTL1_PM_L11 0x2 /* PCI-PM L1.1 Enable */
+#define PCI_L1PM_SUBSTAT_CTL1_ASPM_L12 0x4 /* ASPM L1.2 Enable */
+#define PCI_L1PM_SUBSTAT_CTL1_ASPM_L11 0x8 /* ASPM L1.1 Enable */
+#define PCI_L1PM_SUBSTAT_CTL2 0xC /* L1 PM Substate Control 2 */
+
/*
* The PCI interface treats multi-function devices as independent
* devices. The slot/function address of each device is encoded
diff --git a/ls-ecaps.c b/ls-ecaps.c
index 5e18e06..40f8cb9 100644
--- a/ls-ecaps.c
+++ b/ls-ecaps.c
@@ -527,55 +527,93 @@ cap_evendor(struct device *d, int where)
BITS(hdr, 20, 12));
}
+static inline int l1pm_calc_pwron(int scale, int value)
+{
+ switch (scale)
+ {
+ case 0:
+ return 2 * value;
+ case 1:
+ return 10 * value;
+ case 2:
+ return 100 * value;
+ }
+ return -1;
+}
+
static void
cap_l1pm(struct device *d, int where)
{
- u32 l1_cap;
- int power_on_scale;
+ u32 l1_cap, val, scale;
+ int time;
printf("L1 PM Substates\n");
if (verbose < 2)
return;
- if (!config_fetch(d, where + 4, 4))
+ if (!config_fetch(d, where + PCI_L1PM_SUBSTAT_CAP, 12))
{
printf("\t\t<unreadable>\n");
return;
}
- l1_cap = get_conf_long(d, where + 4);
+ l1_cap = get_conf_long(d, where + PCI_L1PM_SUBSTAT_CAP);
printf("\t\tL1SubCap: ");
printf("PCI-PM_L1.2%c PCI-PM_L1.1%c ASPM_L1.2%c ASPM_L1.1%c L1_PM_Substates%c\n",
- FLAG(l1_cap, 1),
- FLAG(l1_cap, 2),
- FLAG(l1_cap, 4),
- FLAG(l1_cap, 8),
- FLAG(l1_cap, 16));
-
- if (BITS(l1_cap, 0, 1) || BITS(l1_cap, 2, 1))
+ FLAG(l1_cap, PCI_L1PM_SUBSTAT_CAP_PM_L12),
+ FLAG(l1_cap, PCI_L1PM_SUBSTAT_CAP_PM_L11),
+ FLAG(l1_cap, PCI_L1PM_SUBSTAT_CAP_ASPM_L12),
+ FLAG(l1_cap, PCI_L1PM_SUBSTAT_CAP_ASPM_L11),
+ FLAG(l1_cap, PCI_L1PM_SUBSTAT_CAP_L1PM_SUPP));
+
+ if (l1_cap & PCI_L1PM_SUBSTAT_CAP_PM_L12 ||
+ l1_cap & PCI_L1PM_SUBSTAT_CAP_ASPM_L12)
{
printf("\t\t\t PortCommonModeRestoreTime=%dus ",
BITS(l1_cap, 8,8));
- power_on_scale = BITS(l1_cap, 16, 2);
+ time = l1pm_calc_pwron(BITS(l1_cap, 16, 2), BITS(l1_cap, 19, 5));
+ if (time != -1)
+ printf("PortTPowerOnTime=%dus\n", time);
+ else
+ printf("PortTPowerOnTime=<error>\n");
+ }
- printf("PortTPowerOnTime=");
- switch (power_on_scale)
- {
- case 0:
- printf("%dus\n", BITS(l1_cap, 19, 5) * 2);
- break;
- case 1:
- printf("%dus\n", BITS(l1_cap, 19, 5) * 10);
- break;
- case 2:
- printf("%dus\n", BITS(l1_cap, 19, 5) * 100);
- break;
- default:
- printf("<error>\n");
- break;
- }
+ val = get_conf_long(d, where + PCI_L1PM_SUBSTAT_CTL1);
+ printf("\t\tL1SubCtl1: ");
+ printf("PCI-PM_L1.2%c PCI-PM_L1.1%c ASPM_L1.2%c ASPM_L1.1%c\n",
+ FLAG(val, PCI_L1PM_SUBSTAT_CTL1_PM_L12),
+ FLAG(val, PCI_L1PM_SUBSTAT_CTL1_PM_L11),
+ FLAG(val, PCI_L1PM_SUBSTAT_CTL1_ASPM_L12),
+ FLAG(val, PCI_L1PM_SUBSTAT_CTL1_ASPM_L11));
+
+ if (l1_cap & PCI_L1PM_SUBSTAT_CAP_PM_L12 ||
+ l1_cap & PCI_L1PM_SUBSTAT_CAP_ASPM_L12)
+ printf("\t\t\t T_CommonMode=%dus ",
+ BITS(val, 8,8));
+
+ if (l1_cap & PCI_L1PM_SUBSTAT_CAP_ASPM_L12)
+ {
+ scale = BITS(val, 29, 3);
+ if (scale > 5)
+ printf("LTR1.2_Threshhold=<error>\n");
+ else
+ printf("LTR1.2_Threshhold=%lldns\n",
+ BITS(val, 16, 10) *
+ (unsigned long long)cap_ltr_scale(scale));
+ }
+
+ val = get_conf_long(d, where + PCI_L1PM_SUBSTAT_CTL2);
+ printf("\t\tL1SubCtl2: ");
+ if (l1_cap & PCI_L1PM_SUBSTAT_CAP_PM_L12 ||
+ l1_cap & PCI_L1PM_SUBSTAT_CAP_ASPM_L12)
+ {
+ time = l1pm_calc_pwron(BITS(val, 0, 2), BITS(val, 3, 5));
+ if (time != -1)
+ printf("T_PwrOn=%dus\n", time);
+ else
+ printf("T_PwrOn=<error>\n");
}
}
--
2.8.0.rc3.226.g39d4020
next prev parent reply other threads:[~2016-09-09 0:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-01 16:27 [PATCH] lspci: Parse all the L1 PM substate capability regs Rajat Jain
2016-09-09 0:05 ` Rajat Jain [this message]
2016-09-22 21:40 ` [PATCH v2] " Rajat Jain
2016-09-26 18:23 ` Martin Mares
2016-09-26 18:26 ` Rajat Jain
2016-09-26 18:27 ` Rajat Jain
2016-09-26 18:28 ` Martin Mares
2016-10-01 0:43 ` Rajat Jain
2016-10-03 19:50 ` Martin Mares
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473379530-70905-1-git-send-email-rajatja@google.com \
--to=rajatja@google.com \
--cc=bhelgaas@google.com \
--cc=briannorris@google.com \
--cc=david.e.box@linux.intel.com \
--cc=linux-pci@vger.kernel.org \
--cc=mj@ucw.cz \
--cc=rajatxjain@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).