From: Dongdong Liu <liudongdong3@huawei.com>
To: <helgaas@kernel.org>
Cc: <linux-pci@vger.kernel.org>, <wangzhou1@hisilicon.com>,
<gabriele.paoloni@huawei.com>, <charles.chenxin@huawei.com>,
<linuxarm@huawei.com>, Dongdong Liu <liudongdong3@huawei.com>
Subject: [PATCH V3] PCI:hisi: Add DT almost ECAM support for HiSilicon Hip06/Hip07 host controllers
Date: Mon, 6 Feb 2017 14:25:04 +0800 [thread overview]
Message-ID: <1486362304-56261-1-git-send-email-liudongdong3@huawei.com> (raw)
The PCIe controller in Hip06/Hip07 SoCs is not completely
ECAM-compliant. It is non-ECAM only for the RC bus config space; for
any other bus underneath the root bus it does support ECAM access.
This is to add the almost ECAM support in DT way.
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Reviewed-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
---
v2->v3: Fix the compile warning.
drivers/pci/host/pcie-hisi.c:331:29: warning: initialization discards
'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
v1->v2: Use a separate probe function() with a separate struct
platform_driver.
Drop PATCH 3/3, wait for Lorenzo review. Then will
send it as a separate patch if needed.
Rebased on pci/host-hisi.
---
.../devicetree/bindings/pci/hisilicon-pcie.txt | 37 ++++++++++++
drivers/pci/host/pcie-hisi.c | 65 +++++++++++++++++++++-
2 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 59c2f47..38e6dc3 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -42,3 +42,40 @@ Hip05 Example (note that Hip06 is the same except compatible):
0x0 0 0 4 &mbigen_pcie 4 13>;
status = "ok";
};
+
+HiSilicon Hip06/Hip07 PCIe host bridge DT (almost ecam) description
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible : Must be "hisilicon,pcie-almost-ecam"
+
+- reg : Two entries: First the ECAM configuration space for any
+ other bus underneath the root bus. Second, the base
+ and size of the HiSilicon host bridge registers inculde
+ the RC itself config space.
+
+Example:
+ pcie0: pcie@a0090000 {
+ compatible = "hisilicon,pcie-almost-ecam";
+ reg = <0 0xb0000000 0 0x2000000>, /* ECAM configuration space */
+ <0 0xa0090000 0 0x10000>; /* host bridge registers */
+ bus-range = <0 31>;
+ msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
+ msi-map-mask = <0xffff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
+ 0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
+ 0x0 0 0 2 &mbigen_pcie0 650 4
+ 0x0 0 0 3 &mbigen_pcie0 650 4
+ 0x0 0 0 4 &mbigen_pcie0 650 4>;
+ status = "ok";
+ };
diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c
index 33c201a..c51ecb1 100644
--- a/drivers/pci/host/pcie-hisi.c
+++ b/drivers/pci/host/pcie-hisi.c
@@ -24,7 +24,7 @@
#include <linux/regmap.h>
#include "../pci.h"
-#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+#if defined(CONFIG_PCI_HISI) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
static int hisi_pcie_acpi_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
@@ -74,6 +74,8 @@ static void __iomem *hisi_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
return pci_ecam_map_bus(bus, devfn, where);
}
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+
static int hisi_pcie_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
@@ -321,4 +323,65 @@ static int hisi_pcie_probe(struct platform_device *pdev)
};
builtin_platform_driver(hisi_pcie_driver);
+static int hisi_pcie_almost_ecam_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pci_ecam_ops *ops;
+
+ ops = (struct pci_ecam_ops *)of_device_get_match_data(dev);
+ return pci_host_common_probe(pdev, ops);
+}
+
+static int hisi_pcie_platform_init(struct pci_config_window *cfg)
+{
+ struct device *dev = cfg->parent;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+ void __iomem *reg_base;
+
+ if (!dev->of_node)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(dev, "missing \"reg[1]\"property\n");
+ return -EINVAL;
+ }
+
+ reg_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!reg_base)
+ return -ENOMEM;
+
+ cfg->priv = reg_base;
+ return 0;
+}
+
+struct pci_ecam_ops hisi_pcie_platform_ops = {
+ .bus_shift = 20,
+ .init = hisi_pcie_platform_init,
+ .pci_ops = {
+ .map_bus = hisi_pcie_map_bus,
+ .read = hisi_pcie_acpi_rd_conf,
+ .write = hisi_pcie_acpi_wr_conf,
+ }
+};
+
+static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
+ {
+ .compatible = "hisilicon,pcie-almost-ecam",
+ .data = (void *) &hisi_pcie_platform_ops,
+ },
+ {},
+};
+
+static struct platform_driver hisi_pcie_almost_ecam_driver = {
+ .probe = hisi_pcie_almost_ecam_probe,
+ .driver = {
+ .name = "hisi-pcie",
+ .of_match_table = hisi_pcie_almost_ecam_of_match,
+ },
+};
+builtin_platform_driver(hisi_pcie_almost_ecam_driver);
+
+#endif
#endif
--
1.9.1
next reply other threads:[~2017-02-06 6:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-06 6:25 Dongdong Liu [this message]
2017-02-06 22:40 ` [PATCH V3] PCI:hisi: Add DT almost ECAM support for HiSilicon Hip06/Hip07 host controllers Bjorn Helgaas
2017-02-07 1:34 ` Dongdong Liu
2017-02-07 14:47 ` Bjorn Helgaas
2017-02-08 2:39 ` Dongdong Liu
2017-02-09 3:45 ` Dongdong Liu
2017-02-09 15:14 ` Bjorn Helgaas
2017-02-10 2:24 ` Dongdong Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486362304-56261-1-git-send-email-liudongdong3@huawei.com \
--to=liudongdong3@huawei.com \
--cc=charles.chenxin@huawei.com \
--cc=gabriele.paoloni@huawei.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=wangzhou1@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).