From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-Path: Message-ID: <1486395217.2275.38.camel@pengutronix.de> Subject: Re: [PATCH v3 3/3] PCI: imx6: Add code to support i.MX7D From: Lucas Stach To: Andrey Smirnov Date: Mon, 06 Feb 2017 16:33:37 +0100 In-Reply-To: <20170206151716.10381-4-andrew.smirnov@gmail.com> References: <20170206151716.10381-1-andrew.smirnov@gmail.com> <20170206151716.10381-4-andrew.smirnov@gmail.com> Mime-Version: 1.0 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , devicetree@vger.kernel.org, linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, Fabio Estevam , Rob Herring , Bjorn Helgaas , Lee Jones , linux-arm-kernel@lists.infradead.org, yurovsky@gmail.com Content-Type: text/plain; charset="us-ascii" Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+bjorn=helgaas.com@lists.infradead.org List-ID: Am Montag, den 06.02.2017, 07:17 -0800 schrieb Andrey Smirnov: > Add various bits of code needed to support i.MX7D variant of the IP. > > Cc: yurovsky@gmail.com > Cc: Lucas Stach > Cc: Bjorn Helgaas > Cc: Fabio Estevam > Cc: Rob Herring > Cc: Mark Rutland > Cc: Lee Jones > Cc: linux-arm-kernel@lists.infradead.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Signed-off-by: Andrey Smirnov Two small comments inline, otherwise looks real good now. > --- > .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 6 +- > drivers/pci/host/pci-imx6.c | 121 ++++++++++++++++----- > include/linux/mfd/syscon/imx7-iomuxc-gpr.h | 4 + > 3 files changed, 105 insertions(+), 26 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > index 83aeb1f..9f57759 100644 > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > @@ -4,7 +4,11 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP > and thus inherits all the common properties defined in designware-pcie.txt. > > Required properties: > -- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie" > +- compatible: > + - "fsl,imx6q-pcie" > + - "fsl,imx6sx-pcie", > + - "fsl,imx6qp-pcie" > + - "fsl,imx7d-pcie" > - reg: base address and length of the PCIe controller > - interrupts: A list of interrupt outputs of the controller. Must contain an > entry for each entry in the interrupt-names property. This misses an "Additional required properties for imx7d-pcie" section listing the required reset handles. > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c > index 3ef8093..34a21c9 100644 > --- a/drivers/pci/host/pci-imx6.c > +++ b/drivers/pci/host/pci-imx6.c [...] > static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > { > struct pcie_port *pp = &imx6_pcie->pp; > @@ -381,6 +416,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > } > > switch (imx6_pcie->variant) { > + case IMX7D: > + reset_control_assert(imx6_pcie->apps_reset); Can this reset assertion be moved into imx6_pcie_assert_core_reset()? This may change the programming order slightly from the downstream driver, but I guess that won't hurt if this is the equivalent of the LTSSM enable signal. Regards, Lucas _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel