From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org
Cc: mayurkumar.patel@intel.com, David Daney <david.daney@cavium.com>,
linux-arm-msm@vger.kernel.org,
Shawn Lin <shawn.lin@rock-chips.com>,
linux-kernel@vger.kernel.org, Sinan Kaya <okaya@codeaurora.org>,
Julia Lawall <Julia.Lawall@lip6.fr>,
Bjorn Helgaas <bhelgaas@google.com>,
Rajat Jain <rajatja@google.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 2/4] PCI/ASPM: add init hook to device_add
Date: Sat, 25 Mar 2017 17:38:11 -0400 [thread overview]
Message-ID: <1490477893-9517-3-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1490477893-9517-1-git-send-email-okaya@codeaurora.org>
For bridges, have pcie_aspm_init_link_state() allocate a link_state,
regardless of whether it currently has any children.
pcie_aspm_init_link_state(): Called for bridges (upstream end of
link) after all children have been enumerated. No longer needs to
check aspm_support_enabled or pdev->has_secondary_link or the VIA
quirk: pci_aspm_init() already checked that stuff, so we only need
to check pdev->link_state here.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=194895
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/pci/pcie/aspm.c | 41 ++++++++++++++++++++---------------------
1 file changed, 20 insertions(+), 21 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 74fd7c5..f5b1fa0 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -834,6 +834,23 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
*/
int pci_aspm_init(struct pci_dev *pdev)
{
+ struct pcie_link_state *link;
+
+ if (!aspm_support_enabled)
+ return 0;
+
+ /* VIA has a strange chipset, root port is under a bridge */
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT &&
+ pdev->bus->self)
+ return 0;
+
+ if (!pdev->has_secondary_link)
+ return 0;
+
+ link = alloc_pcie_link_state(pdev);
+ if (!link)
+ return -ENOMEM;
+
return 0;
}
@@ -847,33 +864,16 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
struct pcie_link_state *link;
int blacklist = !!pcie_aspm_sanity_check(pdev);
- if (!aspm_support_enabled)
- return;
-
- if (pdev->link_state)
- return;
-
- /*
- * We allocate pcie_link_state for the component on the upstream
- * end of a Link, so there's nothing to do unless this device has a
- * Link on its secondary side.
- */
- if (!pdev->has_secondary_link)
- return;
-
- /* VIA has a strange chipset, root port is under a bridge */
- if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT &&
- pdev->bus->self)
+ if (!pdev->link_state)
return;
+ link = pdev->link_state;
down_read(&pci_bus_sem);
if (list_empty(&pdev->subordinate->devices))
goto out;
mutex_lock(&aspm_lock);
- link = alloc_pcie_link_state(pdev);
- if (!link)
- goto unlock;
+
/*
* Setup initial ASPM state. Note that we need to configure
* upstream links also because capable state of them can be
@@ -898,7 +898,6 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
pcie_set_clkpm(link, policy_to_clkpm_state(link));
}
-unlock:
mutex_unlock(&aspm_lock);
out:
up_read(&pci_bus_sem);
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-03-25 21:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-25 21:38 [PATCH V5 0/4] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Sinan Kaya
2017-03-25 21:38 ` [PATCH V5 1/4] PCI/ASPM: introduce pci_aspm_init() and add to pci_init_capabilities() Sinan Kaya
2017-03-25 21:38 ` Sinan Kaya [this message]
2017-03-25 21:38 ` [PATCH V5 3/4] PCI/ASPM: save power on values during bridge init Sinan Kaya
2017-03-25 21:38 ` [PATCH V5 4/4] PCI/ASPM: move link_state cleanup to bridge remove Sinan Kaya
2017-03-28 4:37 ` [PATCH V5 0/4] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Sinan Kaya
2017-03-28 6:02 ` Patel, Mayurkumar
2017-03-28 12:52 ` Sinan Kaya
2017-03-28 13:04 ` Sinan Kaya
2017-03-29 13:18 ` Sinan Kaya
2017-03-29 17:27 ` Patel, Mayurkumar
2017-03-29 19:09 ` Sinan Kaya
2017-03-29 20:16 ` Patel, Mayurkumar
2017-03-29 20:36 ` Sinan Kaya
2017-03-29 23:08 ` Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490477893-9517-3-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=Julia.Lawall@lip6.fr \
--cc=bhelgaas@google.com \
--cc=david.daney@cavium.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mayurkumar.patel@intel.com \
--cc=rajatja@google.com \
--cc=shawn.lin@rock-chips.com \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).