linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ashok Raj <ashok.raj@intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Joerg Roedel <joro@8bytes.org>,
	linux-pci@vger.kernel.org
Cc: CQ Tang <cq.tang@intel.com>,
	Jean-Phillipe Brucker <jean-philippe.brucker@arm.com>,
	David Woodhouse <dwm2@infradead.org>,
	iommu@lists.linux-foundation.org, Ashok Raj <ashok.raj@intel.com>
Subject: [PATCH 1/2] PCI: Save properties required to handle FLR for replay purposes.
Date: Wed, 10 May 2017 11:28:05 -0700	[thread overview]
Message-ID: <1494440886-8096-1-git-send-email-ashok.raj@intel.com> (raw)

From: CQ Tang <cq.tang@intel.com>

Requires: https://patchwork.kernel.org/patch/9593891


After a FLR, pci-states need to be restored. This patch saves PASID features
and PRI reqs cached.

Cc: Jean-Phillipe Brucker <jean-philippe.brucker@arm.com>
Cc: David Woodhouse <dwm2@infradead.org>
Cc: iommu@lists.linux-foundation.org

Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
---
 drivers/pci/ats.c       | 65 +++++++++++++++++++++++++++++++++++++------------
 drivers/pci/pci.c       |  3 +++
 include/linux/pci-ats.h | 10 ++++++++
 include/linux/pci.h     |  6 +++++
 4 files changed, 69 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 2126497..a769955 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -160,17 +160,16 @@ int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
 	if (!pos)
 		return -EINVAL;
 
-	pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
 	pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
-	if ((control & PCI_PRI_CTRL_ENABLE) ||
-	    !(status & PCI_PRI_STATUS_STOPPED))
+	if (!(status & PCI_PRI_STATUS_STOPPED))
 		return -EBUSY;
 
 	pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
 	reqs = min(max_requests, reqs);
+	pdev->pri_reqs_alloc = reqs;
 	pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
 
-	control |= PCI_PRI_CTRL_ENABLE;
+	control = PCI_PRI_CTRL_ENABLE;
 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
 
 	pdev->pri_enabled = 1;
@@ -206,6 +205,29 @@ void pci_disable_pri(struct pci_dev *pdev)
 EXPORT_SYMBOL_GPL(pci_disable_pri);
 
 /**
+ * pci_restore_pri_state - Restore PRI
+ * @pdev: PCI device structure
+ *
+ */
+void pci_restore_pri_state(struct pci_dev *pdev)
+{
+   u16 control = PCI_PRI_CTRL_ENABLE;
+   u32 reqs = pdev->pri_reqs_alloc;
+   int pos;
+
+   pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
+   if (!pos)
+       return;
+
+   if (!pdev->pri_enabled)
+       return;
+
+   pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
+   pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
+}
+EXPORT_SYMBOL_GPL(pci_restore_pri_state);
+
+/**
  * pci_reset_pri - Resets device's PRI state
  * @pdev: PCI device structure
  *
@@ -224,12 +246,7 @@ int pci_reset_pri(struct pci_dev *pdev)
 	if (!pos)
 		return -EINVAL;
 
-	pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
-	if (control & PCI_PRI_CTRL_ENABLE)
-		return -EBUSY;
-
-	control |= PCI_PRI_CTRL_RESET;
-
+	control = PCI_PRI_CTRL_RESET;
 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
 
 	return 0;
@@ -259,12 +276,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features)
 	if (!pos)
 		return -EINVAL;
 
-	pci_read_config_word(pdev, pos + PCI_PASID_CTRL, &control);
 	pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
-
-	if (control & PCI_PASID_CTRL_ENABLE)
-		return -EINVAL;
-
 	supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
 
 	/* User wants to enable anything unsupported? */
@@ -272,6 +284,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features)
 		return -EINVAL;
 
 	control = PCI_PASID_CTRL_ENABLE | features;
+	pdev->pasid_features = features;
 
 	pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
 
@@ -305,6 +318,28 @@ void pci_disable_pasid(struct pci_dev *pdev)
 EXPORT_SYMBOL_GPL(pci_disable_pasid);
 
 /**
+ * pci_restore_pasid_state - Restore PASID capabilities.
+ * @pdev: PCI device structure
+ *
+ */
+void pci_restore_pasid_state(struct pci_dev *pdev)
+{
+   u16 control;
+   int pos;
+
+   pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
+   if (!pos)
+       return;
+
+   if (!pdev->pasid_enabled)
+       return;
+
+   control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features;
+   pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
+}
+EXPORT_SYMBOL_GPL(pci_restore_pasid_state);
+
+/**
  * pci_pasid_features - Check which PASID features are supported
  * @pdev: PCI device structure
  *
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7904d02..c9a6510 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -28,6 +28,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/pci_hotplug.h>
 #include <linux/vmalloc.h>
+#include <linux/pci-ats.h>
 #include <asm/setup.h>
 #include <asm/dma.h>
 #include <linux/aer.h>
@@ -1171,6 +1172,8 @@ void pci_restore_state(struct pci_dev *dev)
 
 	/* PCI Express register must be restored first */
 	pci_restore_pcie_state(dev);
+	pci_restore_pasid_state(dev);
+	pci_restore_pri_state(dev);
 	pci_restore_ats_state(dev);
 	pci_restore_vc_state(dev);
 
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index 57e0b82..782fb8e 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -7,6 +7,7 @@
 
 int pci_enable_pri(struct pci_dev *pdev, u32 reqs);
 void pci_disable_pri(struct pci_dev *pdev);
+void pci_restore_pri_state(struct pci_dev *pdev);
 int pci_reset_pri(struct pci_dev *pdev);
 
 #else /* CONFIG_PCI_PRI */
@@ -20,6 +21,10 @@ static inline void pci_disable_pri(struct pci_dev *pdev)
 {
 }
 
+static inline void pci_restore_pri_state(struct pci_dev *pdev)
+{
+}
+
 static inline int pci_reset_pri(struct pci_dev *pdev)
 {
 	return -ENODEV;
@@ -31,6 +36,7 @@ static inline int pci_reset_pri(struct pci_dev *pdev)
 
 int pci_enable_pasid(struct pci_dev *pdev, int features);
 void pci_disable_pasid(struct pci_dev *pdev);
+void pci_restore_pasid_state(struct pci_dev *pdev);
 int pci_pasid_features(struct pci_dev *pdev);
 int pci_max_pasids(struct pci_dev *pdev);
 
@@ -45,6 +51,10 @@ static inline void pci_disable_pasid(struct pci_dev *pdev)
 {
 }
 
+static inline void pci_restore_pasid_state(struct pci_dev *pdev)
+{
+}
+
 static inline int pci_pasid_features(struct pci_dev *pdev)
 {
 	return -EINVAL;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index bee980e..1ddb8e0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -395,6 +395,12 @@ struct pci_dev {
 	u8		ats_stu;	/* ATS Smallest Translation Unit */
 	atomic_t	ats_ref_cnt;	/* number of VFs with ATS enabled */
 #endif
+#ifdef CONFIG_PCI_PRI
+	u32		pri_reqs_alloc; /* Number of PRI requests allocated */
+#endif
+#ifdef CONFIG_PCI_PASID
+	u16		pasid_features;
+#endif
 	phys_addr_t rom; /* Physical address of ROM if it's not from the BAR */
 	size_t romlen; /* Length of ROM if it's not from the BAR */
 	char *driver_override; /* Driver name to force a match */
-- 
2.7.4

             reply	other threads:[~2017-05-10 18:31 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-10 18:28 Ashok Raj [this message]
2017-05-10 18:28 ` [PATCH 2/2] iommu/vt-d: Helper function to query if a pasid has any active users Ashok Raj
  -- strict thread matches above, loose matches on Subject: below --
2017-05-10 18:39 [PATCH 1/2] PCI: Save properties required to handle FLR for replay purposes Ashok Raj
2017-05-11 10:50 ` Jean-Philippe Brucker
2017-05-25 13:19   ` Raj, Ashok
2017-05-30 16:31   ` Raj, Ashok
2017-05-23 20:33 ` Bjorn Helgaas
2017-05-24 21:21   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1494440886-8096-1-git-send-email-ashok.raj@intel.com \
    --to=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=cq.tang@intel.com \
    --cc=dwm2@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe.brucker@arm.com \
    --cc=joro@8bytes.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).