From: Shawn Lin <shawn.lin@rock-chips.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, linux-rockchip@lists.infradead.org,
Brian Norris <briannorris@chromium.org>,
Jeffy Chen <jeffy.chen@rock-chips.com>,
Shawn Lin <shawn.lin@rock-chips.com>
Subject: [PATCH v5 07/10] PCI: rockchip: Clean up PHY if driver probe or resume fails
Date: Wed, 23 Aug 2017 15:03:07 +0800 [thread overview]
Message-ID: <1503471787-74055-1-git-send-email-shawn.lin@rock-chips.com> (raw)
In-Reply-To: <1503471673-69478-1-git-send-email-shawn.lin@rock-chips.com>
We observed that the clk_pciephy_ref is still enabled when we actually
fail to probe the driver.
root@linaro-alip:~# cat /sys/kernel/debug/clk/clk_summary | grep pcie
clk_pciephy_ref 1 1 24000000 0 0
clk_pcie_pm 0 0 24000000 0 0
clk_pcie_core_cru 0 0 125000000 0 0
clk_pciephy_ref100m 0 0 100000000 0 0
aclk_pcie 0 0 148500000 0 0
aclk_perf_pcie 0 0 148500000 0 0
pclk_pcie 0 0 37125000 0 0
clk_pcie_core 0 0 0 0 0
clk_pciephy_ref is used by phy driver and we need to properly disable
it for this case. So this patch add error handle for the function of
rockchip_pcie_init_port and rockchip_pcie_resume_noirq to fix this issue.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
Changes in v5:
- fix all the missing error handling cases that need to cleanup
PHY
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/pci/host/pcie-rockchip.c | 46 +++++++++++++++++++++++++---------------
1 file changed, 29 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c
index 933e3e9..42dcb3d 100644
--- a/drivers/pci/host/pcie-rockchip.c
+++ b/drivers/pci/host/pcie-rockchip.c
@@ -561,32 +561,32 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
err = phy_init(rockchip->phys[i]);
if (err) {
dev_err(dev, "init phy%d err %d\n", i, err);
- return err;
+ goto err_exit_phy;
}
}
err = reset_control_assert(rockchip->core_rst);
if (err) {
dev_err(dev, "assert core_rst err %d\n", err);
- return err;
+ goto err_exit_phy;
}
err = reset_control_assert(rockchip->mgmt_rst);
if (err) {
dev_err(dev, "assert mgmt_rst err %d\n", err);
- return err;
+ goto err_exit_phy;
}
err = reset_control_assert(rockchip->mgmt_sticky_rst);
if (err) {
dev_err(dev, "assert mgmt_sticky_rst err %d\n", err);
- return err;
+ goto err_exit_phy;
}
err = reset_control_assert(rockchip->pipe_rst);
if (err) {
dev_err(dev, "assert pipe_rst err %d\n", err);
- return err;
+ goto err_exit_phy;
}
udelay(10);
@@ -594,19 +594,19 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
err = reset_control_deassert(rockchip->pm_rst);
if (err) {
dev_err(dev, "deassert pm_rst err %d\n", err);
- return err;
+ goto err_exit_phy;
}
err = reset_control_deassert(rockchip->aclk_rst);
if (err) {
dev_err(dev, "deassert aclk_rst err %d\n", err);
- return err;
+ goto err_exit_phy;
}
err = reset_control_deassert(rockchip->pclk_rst);
if (err) {
dev_err(dev, "deassert pclk_rst err %d\n", err);
- return err;
+ goto err_exit_phy;
}
if (rockchip->link_gen == 2)
@@ -628,7 +628,7 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
err = phy_power_on(rockchip->phys[i]);
if (err) {
dev_err(dev, "power on phy%d err %d\n", i, err);
- return err;
+ goto err_power_off_phy;
}
}
@@ -639,25 +639,25 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
err = reset_control_deassert(rockchip->mgmt_sticky_rst);
if (err) {
dev_err(dev, "deassert mgmt_sticky_rst err %d\n", err);
- return err;
+ goto err_power_off_phy;
}
err = reset_control_deassert(rockchip->core_rst);
if (err) {
dev_err(dev, "deassert core_rst err %d\n", err);
- return err;
+ goto err_power_off_phy;
}
err = reset_control_deassert(rockchip->mgmt_rst);
if (err) {
dev_err(dev, "deassert mgmt_rst err %d\n", err);
- return err;
+ goto err_power_off_phy;
}
err = reset_control_deassert(rockchip->pipe_rst);
if (err) {
dev_err(dev, "deassert pipe_rst err %d\n", err);
- return err;
+ goto err_power_off_phy;
}
/* Fix the transmitted FTS count desired to exit from L0s. */
@@ -690,7 +690,7 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
500 * USEC_PER_MSEC);
if (err) {
dev_err(dev, "PCIe link training gen1 timeout!\n");
- return -ETIMEDOUT;
+ goto err_power_off_phy;
}
if (rockchip->link_gen == 2) {
@@ -751,6 +751,14 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_DCSR);
return 0;
+err_power_off_phy:
+ while (i--)
+ phy_power_off(rockchip->phys[i]);
+ i = MAX_LANE_NUM;
+err_exit_phy:
+ while (i--)
+ phy_exit(rockchip->phys[i]);
+ return err;
}
static void rockchip_pcie_deinit_phys(struct rockchip_pcie *rockchip)
@@ -1481,7 +1489,7 @@ static int __maybe_unused rockchip_pcie_resume_noirq(struct device *dev)
err = rockchip_pcie_cfg_atu(rockchip);
if (err)
- goto err_pcie_resume;
+ goto err_err_deinit_port;
/* Need this to enter L1 again */
rockchip_pcie_update_txcredit_mui(rockchip);
@@ -1489,6 +1497,8 @@ static int __maybe_unused rockchip_pcie_resume_noirq(struct device *dev)
return 0;
+err_err_deinit_port:
+ rockchip_pcie_deinit_phys(rockchip);
err_pcie_resume:
rockchip_pcie_disable_clocks(rockchip);
return err;
@@ -1554,12 +1564,12 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
err = rockchip_pcie_init_irq_domain(rockchip);
if (err < 0)
- goto err_vpcie;
+ goto err_deinit_port;
err = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
&res, &io_base);
if (err)
- goto err_vpcie;
+ goto err_deinit_port;
err = devm_request_pci_bus_resources(dev, &res);
if (err)
@@ -1631,6 +1641,8 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
err_free_res:
pci_free_resource_list(&res);
+err_deinit_port:
+ rockchip_pcie_deinit_phys(rockchip);
err_vpcie:
if (!IS_ERR(rockchip->vpcie12v))
regulator_disable(rockchip->vpcie12v);
--
1.9.1
next prev parent reply other threads:[~2017-08-23 7:04 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-23 7:01 [PATCH v5 0/10] Some cleanup and bug fix for pcie-rockchip Shawn Lin
2017-08-23 7:02 ` [PATCH v5 01/10] PCI: rockchip: spilt out rockchip_pcie_setup_irq Shawn Lin
2017-08-23 7:02 ` [PATCH v5 02/10] PCI: rockchip: spilt out rockchip_pcie_enable_clocks Shawn Lin
2017-08-23 7:02 ` [PATCH v5 03/10] PCI: rockchip: spilt out rockchip_pcie_disable_clocks Shawn Lin
2017-08-23 7:02 ` [PATCH v5 04/10] PCI: rockchip: fix system hang up if activating CONFIG_DEBUG_SHIRQ Shawn Lin
2017-08-24 20:21 ` Bjorn Helgaas
2017-08-24 21:10 ` Dmitry Torokhov
2017-08-25 1:44 ` Brian Norris
2017-08-25 1:05 ` jeffy
2017-08-25 1:38 ` Shawn Lin
2017-08-23 7:02 ` [PATCH v5 05/10] PCI: rockchip: spilt out rockchip_pcie_deinit_phys Shawn Lin
2017-08-23 7:02 ` [PATCH v5 06/10] PCI: rockchip: fix missing phy manipulation for legacy phy Shawn Lin
2017-08-25 21:18 ` Bjorn Helgaas
2017-08-23 7:03 ` Shawn Lin [this message]
2017-08-23 7:03 ` [PATCH v5 08/10] PCI: rockchip: disable vpcie0v9 for resume_noirq error handling path Shawn Lin
2017-08-23 7:03 ` [PATCH v5 09/10] PCI: rockchip: remove irq domain if failing to probe Shawn Lin
2017-08-23 7:03 ` [PATCH v5 10/10] PCI: rockchip: umap io space " Shawn Lin
2017-08-25 21:38 ` [PATCH v5 0/10] Some cleanup and bug fix for pcie-rockchip Bjorn Helgaas
2017-08-28 2:22 ` Shawn Lin
2017-08-28 18:33 ` Bjorn Helgaas
2017-08-29 0:47 ` Shawn Lin
2017-08-29 18:25 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503471787-74055-1-git-send-email-shawn.lin@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=bhelgaas@google.com \
--cc=briannorris@chromium.org \
--cc=jeffy.chen@rock-chips.com \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).