From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from hqemgate15.nvidia.com ([216.228.121.64]:12987 "EHLO hqemgate15.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752088AbdI0MAr (ORCPT ); Wed, 27 Sep 2017 08:00:47 -0400 From: Manikanta Maddireddy To: , , CC: , , , Manikanta Maddireddy Subject: [PATCH V2 3/4] arm64: tegra: Add PCIe node for Tegra186 Date: Wed, 27 Sep 2017 17:28:36 +0530 Message-ID: <1506513517-25870-4-git-send-email-mmaddireddy@nvidia.com> In-Reply-To: <1506513517-25870-1-git-send-email-mmaddireddy@nvidia.com> References: <1506513517-25870-1-git-send-email-mmaddireddy@nvidia.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-pci-owner@vger.kernel.org List-ID: Tegra186 has three PCIe controllers, which can be operated in 401, 211 or 111 lane combinations. Add DT support for PCIe controllers. Signed-off-by: Manikanta Maddireddy Reviewed-by: Mikko Perttunen Tested-by: Mikko Perttunen --- V2: No change in this patch arch/arm64/boot/dts/nvidia/tegra186.dtsi | 82 ++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 0b0552c9f7dd..9edf2a839e5d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -443,6 +443,7 @@ shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; bpmp_i2c: i2c { compatible = "nvidia,tegra186-bpmp-i2c"; @@ -465,4 +466,85 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; }; + + pcie@10003000 { + compatible = "nvidia,tegra186-pcie"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; + device_type = "pci"; + reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ + 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + + clocks = <&bpmp TEGRA186_CLK_AFI>, + <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "afi", "pex", "pll_e"; + + resets = <&bpmp TEGRA186_RESET_AFI>, + <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_PCIEXCLK>; + reset-names = "afi", "pex", "pcie_x"; + + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + + }; }; -- 2.1.4