From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from smtp.codeaurora.org ([198.145.29.96]:38706 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751701AbdKVFcL (ORCPT ); Wed, 22 Nov 2017 00:32:11 -0500 From: Sinan Kaya To: linux-pci@vger.kernel.org, timur@codeaurora.org Cc: linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Sinan Kaya , Bjorn Helgaas , linux-kernel@vger.kernel.org (open list) Subject: [PATCH 17/30] PCI: cpqhp: deprecate pci_get_bus_and_slot() Date: Wed, 22 Nov 2017 00:31:02 -0500 Message-Id: <1511328675-21981-18-git-send-email-okaya@codeaurora.org> In-Reply-To: <1511328675-21981-1-git-send-email-okaya@codeaurora.org> References: <1511328675-21981-1-git-send-email-okaya@codeaurora.org> Sender: linux-pci-owner@vger.kernel.org List-ID: pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Use pci_get_domain_bus_and_slot() with a domain number of 0 where we can't extract the domain number. Other places, use the actual domain number from the device. Signed-off-by: Sinan Kaya --- drivers/pci/hotplug/cpqphp_pci.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c index e220d49..8897a77 100644 --- a/drivers/pci/hotplug/cpqphp_pci.c +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -89,7 +89,9 @@ int cpqhp_configure_device(struct controller *ctrl, struct pci_func *func) pci_lock_rescan_remove(); if (func->pci_dev == NULL) - func->pci_dev = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, func->function)); + func->pci_dev = pci_get_domain_bus_and_slot(0, func->bus, + PCI_DEVFN(func->device, + func->function)); /* No pci device, we need to create it then */ if (func->pci_dev == NULL) { @@ -99,7 +101,9 @@ int cpqhp_configure_device(struct controller *ctrl, struct pci_func *func) if (num) pci_bus_add_devices(ctrl->pci_dev->bus); - func->pci_dev = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, func->function)); + func->pci_dev = pci_get_domain_bus_and_slot(0, func->bus, + PCI_DEVFN(func->device, + func->function)); if (func->pci_dev == NULL) { dbg("ERROR: pci_dev still null\n"); goto out; @@ -129,7 +133,10 @@ int cpqhp_unconfigure_device(struct pci_func *func) pci_lock_rescan_remove(); for (j = 0; j < 8 ; j++) { - struct pci_dev *temp = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, j)); + struct pci_dev *temp = pci_get_domain_bus_and_slot(0, + func->bus, + PCI_DEVFN(func->device, + j)); if (temp) { pci_dev_put(temp); pci_stop_and_remove_bus_device(temp); @@ -319,6 +326,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) int cloop = 0; int stop_it; int index; + u16 devfn; /* Decide which slots are supported */ @@ -416,7 +424,9 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) new_slot->switch_save = 0x10; /* In case of unsupported board */ new_slot->status = DevError; - new_slot->pci_dev = pci_get_bus_and_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function); + devfn = (new_slot->device << 3) | new_slot->function; + new_slot->pci_dev = pci_get_domain_bus_and_slot(0, + new_slot->bus, devfn); for (cloop = 0; cloop < 0x20; cloop++) { rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) &(new_slot->config_space[cloop])); -- 1.9.1