From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Ariel Elior <ariel.elior@cavium.com>,
everest-linux-l2@cavium.com (supporter:BROADCOM BNX2X 10 GIGABIT
ETHERNET DRIVER),
netdev@vger.kernel.org (open list:BROADCOM BNX2X 10 GIGABIT
ETHERNET DRIVER), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V2 14/29] bnx2x: deprecate pci_get_bus_and_slot()
Date: Wed, 22 Nov 2017 17:49:09 -0500 [thread overview]
Message-ID: <1511390964-9979-15-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1511390964-9979-1-git-send-email-okaya@codeaurora.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Introduce bnx2x_vf_domain() function to extract the domain information
and save it to VF specific data structure.
Use the saved domain value while calling pci_get_domain_bus_and_slot().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 10 +++++++++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 1 +
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 9ca994d..9f40c23 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -812,7 +812,7 @@ static u8 bnx2x_vf_is_pcie_pending(struct bnx2x *bp, u8 abs_vfid)
if (!vf)
return false;
- dev = pci_get_bus_and_slot(vf->bus, vf->devfn);
+ dev = pci_get_domain_bus_and_slot(vf->domain, vf->bus, vf->devfn);
if (dev)
return bnx2x_is_pcie_pending(dev);
return false;
@@ -1041,6 +1041,13 @@ void bnx2x_iov_init_dmae(struct bnx2x *bp)
REG_WR(bp, DMAE_REG_BACKWARD_COMP_EN, 0);
}
+static int bnx2x_vf_domain(struct bnx2x *bp, int vfid)
+{
+ struct pci_dev *dev = bp->pdev;
+
+ return pci_domain_nr(dev->bus);
+}
+
static int bnx2x_vf_bus(struct bnx2x *bp, int vfid)
{
struct pci_dev *dev = bp->pdev;
@@ -1611,6 +1618,7 @@ int bnx2x_iov_nic_init(struct bnx2x *bp)
struct bnx2x_virtf *vf = BP_VF(bp, vfid);
/* fill in the BDF and bars */
+ vf->domain = bnx2x_vf_domain(bp, vfid);
vf->bus = bnx2x_vf_bus(bp, vfid);
vf->devfn = bnx2x_vf_devfn(bp, vfid);
bnx2x_vf_set_bars(bp, vf);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index 53466f6..eb814c6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -182,6 +182,7 @@ struct bnx2x_virtf {
u32 error; /* 0 means all's-well */
/* BDF */
+ unsigned int domain;
unsigned int bus;
unsigned int devfn;
--
1.9.1
next prev parent reply other threads:[~2017-11-22 22:50 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-22 22:48 [PATCH V2 00/29] PCI: deprecate pci_get_bus_and_slot() Sinan Kaya
2017-11-22 22:48 ` [PATCH V2 01/29] alpha/PCI: " Sinan Kaya
2017-11-22 22:48 ` [PATCH V2 02/29] powerpc/PCI: " Sinan Kaya
2017-11-22 22:48 ` [PATCH V2 03/29] x86/PCI: " Sinan Kaya
2017-11-22 22:48 ` [PATCH V2 04/29] ata: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 05/29] agp: nvidia: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 06/29] edd: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 07/29] ibft: " Sinan Kaya
2017-11-24 13:29 ` Konrad Rzeszutek Wilk
2017-11-22 22:49 ` [PATCH V2 08/29] drm/gma500: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 09/29] drm/i915: " Sinan Kaya
2017-11-22 23:25 ` Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 10/29] drm/nouveau: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 11/29] Drivers: ide: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 12/29] iommu/amd: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 13/29] powerpc/powermac: " Sinan Kaya
2017-11-22 22:49 ` Sinan Kaya [this message]
2017-11-22 22:49 ` [PATCH V2 15/29] pch_gbe: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 16/29] PCI: cpqhp: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 17/29] PCI: ibmphp: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 18/29] PCI/quirks: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 19/29] PCI/syscall: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 20/29] xen: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 21/29] openprom: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 22/29] [media] atomisp: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 23/29] staging: rts5208: " Sinan Kaya
2017-11-24 14:58 ` Greg Kroah-Hartman
2017-11-22 22:49 ` [PATCH V2 24/29] backlight: " Sinan Kaya
2017-11-23 12:11 ` Daniel Thompson
2017-11-22 22:49 ` [PATCH V2 25/29] video: fbdev: intelfb: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 26/29] video: fbdev: nvidia: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 27/29] video: fbdev: riva: " Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 28/29] i7300_idle: remove unused file Sinan Kaya
2017-11-22 22:49 ` [PATCH V2 29/29] PCI: remove pci_get_bus_and_slot() function Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511390964-9979-15-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=ariel.elior@cavium.com \
--cc=everest-linux-l2@cavium.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).