From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
intel-gfx@lists.freedesktop.org,
Sinan Kaya <okaya@codeaurora.org>,
Ben Skeggs <bskeggs@redhat.com>, David Airlie <airlied@linux.ie>,
Ilia Mirkin <imirkin@alum.mit.edu>,
dri-devel@lists.freedesktop.org (open list:DRM DRIVER FOR NVIDIA
GEFORCE/QUADRO GPUS),
nouveau@lists.freedesktop.org (open list:DRM DRIVER FOR NVIDIA
GEFORCE/QUADRO GPUS), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V3 10/29] drm/nouveau: deprecate pci_get_bus_and_slot()
Date: Mon, 27 Nov 2017 11:57:47 -0500 [thread overview]
Message-ID: <1511801886-6753-11-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1511801886-6753-1-git-send-email-okaya@codeaurora.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from
1. struct pci_dev
2. struct pci_dev through drm_device->pdev
3. struct pci_dev through fb->subdev->drm_device->pdev
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/gpu/drm/nouveau/dispnv04/arb.c | 4 +++-
drivers/gpu/drm/nouveau/dispnv04/hw.c | 10 +++++++---
drivers/gpu/drm/nouveau/nouveau_drm.c | 3 ++-
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c | 10 +++++++++-
4 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/dispnv04/arb.c b/drivers/gpu/drm/nouveau/dispnv04/arb.c
index 90075b6..c79160c 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/arb.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/arb.c
@@ -213,8 +213,10 @@ struct nv_sim_state {
if ((dev->pdev->device & 0xffff) == 0x01a0 /*CHIPSET_NFORCE*/ ||
(dev->pdev->device & 0xffff) == 0x01f0 /*CHIPSET_NFORCE2*/) {
uint32_t type;
+ int domain = pci_domain_nr(dev->pdev->bus);
- pci_read_config_dword(pci_get_bus_and_slot(0, 1), 0x7c, &type);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(domain, 0, 1),
+ 0x7c, &type);
sim_data.memory_type = (type >> 12) & 1;
sim_data.memory_width = 64;
diff --git a/drivers/gpu/drm/nouveau/dispnv04/hw.c b/drivers/gpu/drm/nouveau/dispnv04/hw.c
index b985990..0c9bdf0 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/hw.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/hw.c
@@ -216,12 +216,15 @@
{
struct nvkm_pll_vals pllvals;
int ret;
+ int domain;
+
+ domain = pci_domain_nr(dev->pdev->bus);
if (plltype == PLL_MEMORY &&
(dev->pdev->device & 0x0ff0) == CHIPSET_NFORCE) {
uint32_t mpllP;
-
- pci_read_config_dword(pci_get_bus_and_slot(0, 3), 0x6c, &mpllP);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(domain, 0, 3),
+ 0x6c, &mpllP);
mpllP = (mpllP >> 8) & 0xf;
if (!mpllP)
mpllP = 4;
@@ -232,7 +235,8 @@
(dev->pdev->device & 0xff0) == CHIPSET_NFORCE2) {
uint32_t clock;
- pci_read_config_dword(pci_get_bus_and_slot(0, 5), 0x4c, &clock);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(domain, 0, 5),
+ 0x4c, &clock);
return clock / 1000;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 595630d..0b6c639 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -406,7 +406,8 @@ static int nouveau_drm_probe(struct pci_dev *pdev,
}
/* subfunction one is a hdmi audio device? */
- drm->hdmi_device = pci_get_bus_and_slot((unsigned int)pdev->bus->number,
+ drm->hdmi_device = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+ (unsigned int)pdev->bus->number,
PCI_DEVFN(PCI_SLOT(pdev->devfn), 1));
if (!drm->hdmi_device) {
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
index 3c6a871..8849b71 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
@@ -28,8 +28,16 @@
{
struct pci_dev *bridge;
u32 mem, mib;
+ int domain = 0;
+ struct pci_dev *pdev = NULL;
- bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 1));
+ if (dev_is_pci(fb->subdev.device->dev))
+ pdev = to_pci_dev(fb->subdev.device->dev);
+
+ if (pdev)
+ domain = pci_domain_nr(pdev->bus);
+
+ bridge = pci_get_domain_bus_and_slot(domain, 0, PCI_DEVFN(0, 1));
if (!bridge) {
nvkm_error(&fb->subdev, "no bridge device\n");
return -ENODEV;
--
1.9.1
next prev parent reply other threads:[~2017-11-27 16:57 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-27 16:57 [PATCH V3 00/29] PCI: deprecate pci_get_bus_and_slot() Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 01/29] alpha/PCI: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 02/29] powerpc/PCI: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 03/29] x86/PCI: " Sinan Kaya
2017-11-28 13:45 ` Thomas Gleixner
2017-11-27 16:57 ` [PATCH V3 04/29] ata: " Sinan Kaya
2017-11-27 19:50 ` Tejun Heo
2017-11-27 16:57 ` [PATCH V3 05/29] agp: nvidia: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 06/29] edd: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 07/29] ibft: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 08/29] drm/gma500: " Sinan Kaya
2017-11-27 18:49 ` Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 09/29] drm/i915: " Sinan Kaya
2017-11-27 18:50 ` Sinan Kaya
2017-12-12 14:04 ` Joonas Lahtinen
2017-12-13 0:07 ` Sinan Kaya
2017-12-13 8:01 ` Joonas Lahtinen
2017-11-28 15:30 ` [Intel-gfx] " Ville Syrjälä
2017-11-28 16:29 ` Sinan Kaya
2017-12-03 19:29 ` Sinan Kaya
2018-02-16 14:54 ` Bjorn Helgaas
2018-02-19 9:34 ` Jani Nikula
2018-02-19 9:47 ` Joonas Lahtinen
2017-11-27 16:57 ` Sinan Kaya [this message]
2017-11-27 18:52 ` [PATCH V3 10/29] drm/nouveau: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 11/29] Drivers: ide: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 12/29] iommu/amd: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 13/29] powerpc/powermac: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 14/29] bnx2x: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 15/29] pch_gbe: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 16/29] PCI: cpqhp: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 17/29] PCI: ibmphp: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 18/29] PCI/quirks: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 19/29] PCI/syscall: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 20/29] xen: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 21/29] openprom: " Sinan Kaya
2017-11-27 16:57 ` [PATCH V3 22/29] [media] atomisp: " Sinan Kaya
2017-11-29 8:36 ` Sakari Ailus
2017-11-27 16:58 ` [PATCH V3 23/29] staging: rts5208: remove rtsx_read_pci_cfg_byte() Sinan Kaya
2017-11-27 16:58 ` [PATCH V3 24/29] backlight: deprecate pci_get_bus_and_slot() Sinan Kaya
2017-11-27 19:46 ` Jingoo Han
2017-11-28 8:13 ` Lee Jones
2017-11-27 16:58 ` [PATCH V3 25/29] video: fbdev: intelfb: " Sinan Kaya
2017-11-27 16:58 ` [PATCH V3 26/29] video: fbdev: nvidia: " Sinan Kaya
2017-11-27 16:58 ` [PATCH V3 27/29] video: fbdev: riva: " Sinan Kaya
2017-11-27 16:58 ` [PATCH V3 28/29] i7300_idle: remove unused file Sinan Kaya
2017-11-27 16:58 ` [PATCH V3 29/29] PCI: remove pci_get_bus_and_slot() function Sinan Kaya
2017-11-29 17:09 ` [PATCH V3 00/29] PCI: deprecate pci_get_bus_and_slot() Bjorn Helgaas
2017-12-01 2:15 ` Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511801886-6753-11-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=airlied@linux.ie \
--cc=bskeggs@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=imirkin@alum.mit.edu \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nouveau@lists.freedesktop.org \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).