From: Shawn Lin <shawn.lin@rock-chips.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
Heiko Stuebner <heiko@sntech.de>,
linux-pci@vger.kernel.org, Shawn Lin <shawn.lin@rock-chips.com>
Subject: [PATCH v2 0/6] Add endpoint driver for Rockchip PCIe controller
Date: Fri, 23 Feb 2018 09:15:03 +0800 [thread overview]
Message-ID: <1519348503-243259-1-git-send-email-shawn.lin@rock-chips.com> (raw)
Patch 1 firstly move the whole Rockchip PCIe host driver from
drivers/pci/host to a new folder, driver/pci/rockchip/, and rename
pcie-rockchip.c to pcie-rockchip-host.c. It also update the
Kconfig/Makefile etc to repect this change.
Then patch 2 and patch 3 are trying to spilt out some common code in
preparation for adding endponit controller driver support.
Patch 4 rename rockchip-pcie.txt to rockchip-pcie-host.txt.
Patch 5 adds endpoint controller driver support as well as the new
documentation, rockchip-pcie-ep.txt, introduced by patch 6.
Changes in v2:
- remove rockchip,rk3399-pcie-host compatible(Suggested by Rob)
- fix some error handling
Shawn Lin (6):
PCI: rockchip: Create individual folder for rockchip drivers
PCI: rockchip: Split out common function to parse DT
PCI: rockchip: Spilt out common function to init controller
dt-bindings: PCI: rockchip: Rename rockchip-pcie.txt to
rockchip-pcie-host.txt
PCI: rockchip: Add Endpoint controller driver for Rockchip PCIe
controller
dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe endpoint
controller
.../devicetree/bindings/pci/rockchip-pcie-ep.txt | 62 ++
.../{rockchip-pcie.txt => rockchip-pcie-host.txt} | 0
MAINTAINERS | 4 +-
drivers/pci/Kconfig | 1 +
drivers/pci/Makefile | 2 +
drivers/pci/host/Kconfig | 11 -
drivers/pci/host/Makefile | 1 -
drivers/pci/rockchip/Kconfig | 32 +
drivers/pci/rockchip/Makefile | 4 +
drivers/pci/rockchip/pcie-rockchip-ep.c | 641 +++++++++++++++++++++
.../pcie-rockchip-host.c} | 594 +------------------
drivers/pci/rockchip/pcie-rockchip.c | 417 ++++++++++++++
drivers/pci/rockchip/pcie-rockchip.h | 343 +++++++++++
13 files changed, 1517 insertions(+), 595 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt
rename Documentation/devicetree/bindings/pci/{rockchip-pcie.txt => rockchip-pcie-host.txt} (100%)
create mode 100644 drivers/pci/rockchip/Kconfig
create mode 100644 drivers/pci/rockchip/Makefile
create mode 100644 drivers/pci/rockchip/pcie-rockchip-ep.c
rename drivers/pci/{host/pcie-rockchip.c => rockchip/pcie-rockchip-host.c} (61%)
create mode 100644 drivers/pci/rockchip/pcie-rockchip.c
create mode 100644 drivers/pci/rockchip/pcie-rockchip.h
--
1.9.1
next reply other threads:[~2018-02-23 1:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 1:15 Shawn Lin [this message]
2018-02-23 1:15 ` [PATCH v2 1/6] PCI: rockchip: Create individual folder for rockchip drivers Shawn Lin
2018-02-23 1:16 ` [PATCH v2 2/6] PCI: rockchip: Split out common function to parse DT Shawn Lin
2018-02-23 1:16 ` [PATCH v2 3/6] PCI: rockchip: Spilt out common function to init controller Shawn Lin
2018-02-25 0:51 ` [v2,3/6] " JeffyChen
2018-02-27 11:29 ` [PATCH v2 3/6] " Lorenzo Pieralisi
2018-02-23 1:17 ` [PATCH v2 4/6] dt-bindings: PCI: rockchip: Rename rockchip-pcie.txt to rockchip-pcie-host.txt Shawn Lin
2018-03-02 15:10 ` Rob Herring
2018-02-23 1:17 ` [PATCH v2 5/6] PCI: rockchip: Add Endpoint controller driver for Rockchip PCIe controller Shawn Lin
2018-02-27 15:32 ` Lorenzo Pieralisi
2018-02-28 1:40 ` Shawn Lin
2018-02-28 11:22 ` Lorenzo Pieralisi
2018-02-28 12:11 ` Lorenzo Pieralisi
2018-03-01 3:45 ` Shawn Lin
2018-02-23 1:17 ` [PATCH v2 6/6] dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe endpoint controller Shawn Lin
-- strict thread matches above, loose matches on Subject: below --
2018-02-24 10:55 [PATCH v2 0/6] Add endpoint driver for Rockchip PCIe controller JeffyChen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519348503-243259-1-git-send-email-shawn.lin@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).